View Full Version : ecusafe mini
johncooper85
13th December, 2010, 10:23 AM
Hi,
someone succeeds in passing my gold to ecusafe because I don't know the settaggis to effect....
mini cooper d 110 1600 diesel fap edc 16+c35 motor peugeot
thanks
alfy
13th December, 2010, 10:35 AM
Hi,
someone succeeds in passing my gold to ecusafe because I don't know the settaggis to effect....
mini cooper d 110 1600 diesel fap edc 16+c35 motor peugeot
thanks
You want to remove FAP or something else?
Kuba_KMS
13th December, 2010, 11:43 AM
Try and report.
Checksum calculated.
Best regards
Kuba
johncooper85
13th December, 2010, 12:04 PM
thanks.....go to test
johncooper85
13th December, 2010, 03:32 PM
I have tried anybody damage and I have anticipated around 30 km.I have only then now to physically eliminate the fap and to replace him/it with a direct pipe.....
thanks thousand
gyba
23rd December, 2010, 06:02 PM
functions perfectly :D
djwizard
10th June, 2011, 03:39 PM
Hi people.
Can please somebody remove too my fap and egr?
Please...
Here is my original file:
www.imperiobonanca.com/minex/minex.bin (http://www.imperiobonanca.com/minex/minex.bin)
Edit: Now I can download here, please some help...
Thanks a lot again people, hope you can help me...
z786
10th June, 2011, 03:50 PM
2 posts and you want free egr and dpf off?
come on mate be realistic
djwizard
10th June, 2011, 03:55 PM
I know, it looks bad... But after read a lot of information, I found someone in ECU-TUNING.IT that told that DigitalKAOS has a solution for Mini... After search a lot, I think that here is the post... Como on, I will thank you forever and help in what I can...
sherl645
10th June, 2011, 04:22 PM
Hi,
Out of interest, what do ye use to read these 16c35 ECU's? BDM?
Ronan
bazare
10th June, 2011, 05:38 PM
yes BDM is the cheap-safe solution to go
sherl645
10th June, 2011, 08:49 PM
Thanks for that, I have a cheap BDM100 but wasn't sure about using it on edc16c35 as it doesn't appear to be listed on it. I will have a better look.
Reason I ask is that I have a Mini D in the workshop at the moment with DPF trouble, I might De-DPF it if it is going to be costly to fix.
Thanks,
Ronan
diga1
10th June, 2011, 10:59 PM
what if you have driled couple of holes trough dpf to release a pressure, it shuld help,
djwizard
11th June, 2011, 09:04 AM
Hi people.
I already tried to remove FAP from my file using ECUSAFE in Mini EDC16 option, but it does nothing...
Can it be done using Peugeot EDC16? When I try to do that appears the speed limit to change (206kmh??) and at the end it says: DPF REMOVED.
Here is the file that I did using Peugeot EDC16:
www.imperiobonanca.com/minex/minexnofapecusafe.bin
Help people, please...
Thanks a lot
djwizard
12th June, 2011, 08:42 PM
Please people, help...
Thanks in advance...
maucontacto
6th July, 2011, 02:50 PM
Hello!!
I?m with the same problem with this file!!
BR
lulu2003
6th July, 2011, 03:21 PM
which model year?
maucontacto
6th July, 2011, 03:23 PM
which model year?
Cooper D 1.6"Hdi" 2008
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.