View Full Version : vw polo sdi immo help
tomo776
20th December, 2010, 08:02 AM
I need to calculate immo off file for vw polo 1999
ecu is 038 906 013E
Bosch 0 281 001 689
immo 6H0 953 257B
siemens 5WK47740
i have tried with several dump but not work
so i need help
this is the file from 24C02 eprom
thanks
Sory for my bad english
Tomo
waldi1979
20th December, 2010, 03:55 PM
Try this dump.
tomo776
18th January, 2011, 10:35 PM
Sory on late inform but i solve problem.
If you need dump to compare send me email please.
dakovact@gmail.com
THANX for dump i will compare with my wich is 100% ok.
Car is started ok without immo box.
tomo
Sory on my BAD english
gijsvm
23rd December, 2011, 06:35 PM
Try this dump.
Have someone try this dump if it works ?
tomo776
24th December, 2011, 11:03 AM
Here is dump tested from me.
Remov immo box and car starts.
gijsvm
24th December, 2011, 09:32 PM
Here is dump tested from me.
Remov immo box and car starts.
Question about immo box position.
Where is the located in the polo 1999 ?
gijsvm
24th December, 2011, 09:49 PM
Here is dump tested from me.
Remov immo box and car starts.
I think that your dump is not ok, it ends at: DA. and normal 24c02 dump end at: FF when i open it whith winhex.
I look link a part is missing.
tomo776
24th December, 2011, 10:28 PM
I use this and car start without immo.
And immo is in eprom 24C02
mark as B58253
gijsvm
25th December, 2011, 11:44 AM
I use this and car start without immo.
And immo is in eprom 24C02
mark as B58253
Oke i will try to program the 24c02 in ecu, but are you disconnect the immo-box in car also ?
tomo776
25th December, 2011, 01:48 PM
yes i remowe immo from car.
gijsvm
25th December, 2011, 03:10 PM
yes i remowe immo from car.
Where can i find the immobox in this car ?
tomo776
25th December, 2011, 06:53 PM
i think that is up from fuse box.
Folow the wire from key and you find the immo box.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.