View Full Version : Seat Ibiza 1.4 1997 immo off
p30esteves
9th March, 2011, 09:16 PM
Hi, I need to make immo off ECU Seat Ibiza 1.4 bosch 6k0906027D 261203934, inside I can see 87c510 and 24c02, I can?t read 87c510 with my batronix programmer, here it is 24c02 dump
Thanks
grinovsky
9th March, 2011, 09:57 PM
try this.....
p30esteves
9th March, 2011, 10:40 PM
Thanks, tomorrow I will try it, and I will report the result
Thanks
p30esteves
10th March, 2011, 04:17 PM
Hi, it didn?t work :( anyone have solution for this ECU ??
Thanks
rabbitepp
10th March, 2011, 05:57 PM
try this and report
p30esteves
11th March, 2011, 12:41 PM
Hi ECUprog it didn?t work, anyone can tell me the pin number from the 24c02 dump??
Thanks
rabbitepp
11th March, 2011, 12:43 PM
try make synchro in vag com
25-immo
10-adaptation
in channel 00 write 00
thats all
p30esteves
11th March, 2011, 07:50 PM
Hi ECUpro I ve tried the adaptation but it didn?t work :(
Thanks
gadroulll
12th March, 2011, 09:35 PM
immo off 87c510
lupu_sandu
13th March, 2011, 04:43 PM
or read HC05 from immobox
p30esteves
15th March, 2011, 09:20 PM
or read HC05 from immobox
Hi Lupu sandu, I can?t find any MCU HC05, I took some pictures:
thanks
budG60
15th March, 2011, 11:25 PM
Why don't you buy a VW immo emulator for 25 euro. This certainly will work.
odyseus7
15th March, 2011, 11:48 PM
TMS 370 DIP 28,READ WITH X-PROG.
p30esteves
16th March, 2011, 12:02 AM
Hi I don?t have Exprog I ve got UPA and carprog, do you think I can read it with UPA ???
Thanks
rabbitepp
16th March, 2011, 12:13 AM
try this file
p30esteves
16th March, 2011, 12:48 AM
Ok I will try it tomorrow
Thanks
rabie_m
16th March, 2011, 01:06 AM
this is your immo off pass pm
multitek
1st April, 2011, 10:02 PM
this is your immo off pass pm
hi,
could you send me too the pass , i have the same car ecu with exactly the same immo problem
losing.control
28th June, 2011, 11:42 AM
this is your immo off pass pm
Hi Rabi can you please help me,i have a problem with a similar car.
mecano_diag
28th June, 2011, 12:35 PM
I have same problem i solved here with this dump
work 100/100
pass in pm
losing.control
28th June, 2011, 09:22 PM
I have same problem i solved here with this dump
work 100/100
pass in pm
Thanks for your help mecano_diag it works like a bomb.thank you again,you save my day.if you need anything feel free to ask.big hug
jack1
11th February, 2014, 11:08 PM
I have same problem i solved here with this dump
work 100/100
pass in pm
I know it's an old thread but any chance of a password please, thanks
rdu04
2nd December, 2015, 02:18 PM
ecu
Bosch MP 9.0 - Read B58400 - 87C510
0261203613/614 engine 1,4
This is MP 9.0
can help me immo off please
rdc
3rd December, 2015, 12:45 AM
Please pass
cheester
23rd December, 2015, 04:00 PM
I have same problem i solved here with this dump
work 100/100
pass in pm
Can I have a pass for this file???
epicsabi
18th July, 2016, 01:51 PM
Hello,
Please give me a pass for this file. From Mecano_diag.
BR
Thoom
30th July, 2018, 09:33 AM
hello
please pass for file
blastergsm
24th September, 2018, 09:09 AM
hi, can u give me the password ,please
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.