Bmw Dme Ms41.0 immo off

[Vagilektro1]

your file cleared
seregka

[seregka]

Тhank you, it works

[ZIOMAL4340]

Hello

Please Immo off in my dump

28f200 read willem
Ms41
5wk90322
bmw e39
I need a proven solution, the car is not in the garage

Thanks

[safinho]

826887

pass in pm

[zorans]

Hi to all,
I need immo off.
Thanks in advance.

[Thomas Do]

Hi, Please off immo in my dump
BMW E36
MS41 Siemen 28F200 (intel)

[sylviogama]

hi can someone give a little help with ews off?

here is my 24kb dump

837530

[brend]

hi can someone give a little help with ews off?

here is my 24kb dump

837530


Here immo off.......

[Agut22]

Hi i have an engine and ecu ms41 from an 528i i swapped to an e30 only have engine wiring to ecu it’s possível to immo off without the 1/3 wiring ews or immo off Will work only on file with ews wiring thanks to all
I will post the file

[Agut22]

hi can anyine make immo off to this file read with ms41 flasher the car have a 28i engine in a E30 swapp only engine and ecu no ews
thanks to all thta help

[brend]

hi can anyine make immo off to this file read with ms41 flasher the car have a 28i engine in a E30 swapp only engine and ecu no ews
thanks to all thta help


Here immo off...........

For pass push magic button

[Agut22]

thank you and already thanks please pass

[Agut22]

thank you and already thanks please pass

[brend]

thank you and already thanks please pass


Done.

Look at pm .

[hristopm]

Could you please help me with immo off for the ECU.
The ECU was readed with KESS. Please check the dump and after immo off please create the check sum if needed.
I will try to write it back again with KESS.

5WK9 0332
1429861
DME MS41.0

What I must to know after put it into the car or only Plug&Play

Thank you in advace!

[kiszka]

Could you please help me with immo off for the ECU.
The ECU was readed with KESS. Please check the dump and after immo off please create the check sum if needed.
I will try to write it back again with KESS.

5WK9 0332
1429861
DME MS41.0

What I must to know after put it into the car or only Plug&Play

Thank you in advace!

do a full flash read

[hristopm]

do a full flash read
is it not a full flash? I have read it with kess

[brend]

is it not a full flash? I have read it with kess



Buffer size is 256 kb and in here only map 24kb , but for immo off must by enough.

First disconnect immo box (ews) bridge starter wires then insert ecu .


Try and don't forger report about resault's .

[hristopm]

Buffer size is 256 kb and in here only map 24kb , but for immo off must by enough.

First disconnect immo box (ews) bridge starter wires then insert ecu .


Try and don't forger report about resault's .



Can you offer me a tried and tested method that will not damage the program and the ecu?
Does KESS work in this case? I can try with KKL adapter or unsolder the flash and read it with an external programmer.


Which is the safest option.

[rafal]

don't need desolder................
https://www.ms4x.net/index.php?title=Flashing_Tools

[hristopm]

don't need desolder................
https://www.ms4x.net/index.php?title=Flashing_Tools

Hello rafal (https://www.digital-kaos.co.uk/forums/member.php/192493-rafal)
,
Thank you for the information. Will try this week.

[motorotacja]

Hi
Can someone do immo off + checksum on this file? Read 256kb by kess.

HW: 1429861
SW: 4101
VIN nr.: WBADD51020BP03036

ms41.0 5wk9 032 d13

[Svita]

Here is your file, EWS delete + CKS corrected. :friendly_wink:

Pass in PM

THX and rep please

[mikic]

Hi
Can someone make immo off + checksum on this file?
Ms41.0 1429861
5wk90322
Best regards

[marcolr]

Your file Off + chk ok + instructions.

Regards

[kurtat333]

Hi:beerglass:
Read 256kb by kess.
Can someone do immo off + checksum on this file?
HW: 1429861
SW: 4101
VIN nr.: WBADD61050BR46524
910669

[kiszka]

Привет:beerglass:
Прочитано 256 КБ от kess.
Может ли кто-нибудь сделать immo off + контрольная сумма для этого файла?
HW: 1429861
SW: 4101
VIN nr.: WBADD61050BR46524
910669
The flash content is incomplete
If you don't know English use google translator and write in English

[kurtat333]

Hi:beerglass:
Read 256kb by kess.
Can someone do immo off + checksum on this file?
HW: 1429861
SW: 4101
VIN nr.: WBADD61050BR46524

[kiszka]

Hi:beerglass:
Read 256kb by kess.
Can someone do immo off + checksum on this file?
HW: 1429861
SW: 4101
VIN nr.: WBADD61050BR46524

you still only read the maps themselves

[kurtat333]

here is the file to read minipro 28f200az
HW: 1429861
SW: 4101

[kiszka]

here is the file to read minipro 28f200az
HW: 1429861
SW: 4101

https://mega.nz/file/N2IUXRTb

[burko]

can anyone help with EWS off

[kiszka]

can anyone help with EWS off
https://mega.nz/file/4jZjALYL

[trevormaharaj]

hi can anyone please assist with a fault code delete write it out
ms41.0 siemens-flash 28f200
e39 .525i
i need both oxygen sensor to be deleted out of the file cats was removed
thanks in advance

[hrag]

Hi to all frend
MS41.0 old model donet have 28f200 have only
Tms87pc110 & ZMD U6264ASK I need to clone it
I try to read with my all tools no way kess read id only then give me error Flashrom is protected
any instruction to read ?????
have a nice weekend

[boost turbo]

Your file off:
thanks
ples pass

[gsmflasch]

Hi,
Can someone turn immo off on my MS41.0 with 28F200 file?

Thank you

[brend]

Hi,
Can someone turn immo off on my MS41.0 with 28F200 file?

Thank you


Hi.

Here immo off.......... 961517

[joujou12]

HELOO
Need immo off ms41 .Read with IPROG




THANKS

[kiszka]

HELOO
Need immo off ms41 .Read with IPROG
THANKS
there is nothing you can do with this file, full read is needed

[majedjefara]

HELOO
Need immo off ms41 .Read with kess v2

[brend]

HELOO
Need immo off ms41 .Read with kess v2



Here immo off..............bmw e36_mod_immo_off.rar (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=972957&d=1688988676)

Pw look at PM .

[majedjefara]

Need immo off ms41 .Read with kess v2

[majedjefara]

Here immo off..............bmw e36_mod_immo_off.rar (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=972957&d=1688988676)

Pw look at PM .

Thank you, it worked, but the car air conditioner did not work

[JHDSoft]

Hi all
i need immo off
MS41.0 5WK9 0322 Index10 1 429 861
dump read with "Siemens MS41 Flash Tool_105b" K+DCAN
and with kess


thank you

[kiszka]

Hi all
i need immo off
MS41.0 5WK9 0322 Index10 1 429 861
dump read with "Siemens MS41 Flash Tool_105b" K+DCAN
and with kess
thank you
pass is on PM
https://mega.nz/file/4nJHSYLC

[Lambda1]

Thank you, it worked, but the car air conditioner did not work
Happens when konfiguration is changed. Immo off MS41 is one byte.

[delpipo10]

hello i need immo off ms41.0 28f200

[marcolr]

hello i need immo off ms41.0 28f200

Bad reading.

[tomic19]

Hello, can someone make immo off...
E39, 5WK90322, MS41, 1429861

rEGARDS

[tomic19]

Hello, can someone make immo off...
E39, 5WK90322, MS41, 1429861

rEGARDS


anyone?

regards

[ricked]

anyone?

regards

your file off...

[Mario2414]

your file off...

hi all,
can anyone help my case , before my dme bricked ,i flash wrong file with ms41 quick flash, and then my ecu is bricked , i hope someone help me to instruct how me can unbricecked my ecu, this file before i flash , and i need immo off 28f200

[Mario2414]

anyone can help me please

[gwiazdamb]

hi all,
can anyone help my case , before my dme bricked ,i flash wrong file with ms41 quick flash, and then my ecu is bricked , i hope someone help me to instruct how me can unbricecked my ecu, this file before i flash , and i need immo off 28f200


Disconnect ews bridge starter

[Mario2414]

Disconnect ews bridge starter

many thanks for you ... :):)

[majedjefara]

HELLO

PLEASE IMMO OFF FOR THIS ECU BMW SIMENS DME-MS41.0
HW: 1429373SW: 5900
VIN nr.: WBACB51030AN16248
SW ver.:
Spare:
Engine:
HW Ver.:
SW upg.:
Installation:

[Hayssam1]

HELLO

PLEASE IMMO OFF FOR THIS ECU BMW SIMENS DME-MS41.0
HW: 1429373SW: 5900
VIN nr.: WBACB51030AN16248
SW ver.:
Spare:
Engine:
HW Ver.:
SW upg.:
Installation:

try this file and let me know

[majedjefara]

try this file and let me know

not working

[Hayssam1]

not working

have you disconnect EWS ?

[erkor]

not working

Hi.


The file from Hayssam1 is done well.
Maybe you have a problem with writing, read the file after saving to the ECU and compare whether the changes have been saved.
Disconnect EWS and connect the two thick pins in the cube.

[cheester]

Hi Lads
Any Chance to get a immo (ews) off on attached below 28F200
Just only got ECU, reading done on ext programmer so please with chk included and tested solution


MS41
5WK9 0322
1429861

Thanks in advance for any help!

[alonedark]

Hi Lads
Any Chance to get a immo (ews) off on attached below 28F200
Just only got ECU, reading done on ext programmer so please with chk included and tested solution


MS41
5WK9 0322
1429861

Thanks in advance for any help!
her you ahve

[pakman3]

Hi
i need help for immo off bmw ecu MS41.0
siemens 5WK9 0322
1 429 861
Thanks

[thenewon]

hi
i need of IMMO OFF for 2012 Hyundai CRDI BOSCH EPC17CP14 (39101-2F240) thanks

[gwiazdamb]

Hi
i need help for immo off bmw ecu MS41.0
siemens 5WK9 0322
1 429 861
Thanks

Disconect ews bridge starter

[Andressota]

Helo MS41.0 E39 520
5wk9 0322 original file,
read from MS41Flash
28f200
plase immo off chcksum

[marcolr]

Helo MS41.0 E39 520
5wk9 0322 original file,
read from MS41Flash
28f200
plase immo off chcksum

Your file off.

Disconnect EWS and bridge the starter.

Regards

[madwolf008]

Hello,
Can someone please do immo off, CHECKSUM on MS41.0?

And also ISN code?

BMW e39
Siemens
5WK9 0322 Index 10
DME MS41.0
1 429 861

Thank you!


1059126