View Full Version : peugeot 306 immo
d.zio
14th May, 2011, 08:37 AM
hello to all....
i have a peugeot 306 car 96 model 1400cc
ecu magnetti marelli g6.14 0d03
and i want to make immo off because the keyboard inside has problem and sometimes the car starts after hours trying to put the code....
has anyone immo off file for this???
i will read the eeprom of the mcu inside and i will post it here....
thanks in advance
lupu_sandu
14th May, 2011, 09:39 AM
2 solution for this ECU:
- read HC11A1 from ECU and post here;
- clock file for 27C256
d.zio
14th May, 2011, 09:48 AM
THIS IS THE HC11A1 EEPROM....
WHIP PIN HAVE I TO CUT???
d.zio
14th May, 2011, 10:13 AM
ANY HELP PLEASE???
d.zio
14th May, 2011, 10:42 AM
URGENT PLEASE
bram380
14th May, 2011, 11:33 AM
THIS IS THE HC11A1 EEPROM....
WHIP PIN HAVE I TO CUT???
pin code:
1954
d.zio
14th May, 2011, 11:36 AM
I KNOW THE PIN CODE....THE KEYBOARD DONT WORK EVERY TIME....
bram380
14th May, 2011, 11:38 AM
Try this dump:
d.zio
14th May, 2011, 12:57 PM
NOTHING MY FRIEND......
I TRIED ALSO ALL FF TO EEPROM.....BUT NOTHING
bram380
14th May, 2011, 01:49 PM
Try this methode:
http://www.digital-kaos.co.uk/forums/f178/peugeot-406-1998-immo-off-204838/
d.zio
14th May, 2011, 02:40 PM
THANKS MATE FOR YOUR HELP BUT MY ECU IS NOT BOSCH...IS MAGNETTI MARRELI...THEY ARE NOT THE SAME.....
ANY WAY I SOLVED MY PROBLEM WITH OTHER METHOD:top:
tomaszcz
14th May, 2011, 06:00 PM
THANKS MATE FOR YOUR HELP BUT MY ECU IS NOT BOSCH...IS MAGNETTI MARRELI...THEY ARE NOT THE SAME.....
ANY WAY I SOLVED MY PROBLEM WITH OTHER METHOD:top:
Please number ecu,post here.
gejzaslapka
14th May, 2011, 06:06 PM
Hello,
Have You tried enter code by keyboard and disconnect it after start?
GS
d.zio
14th May, 2011, 06:10 PM
TOMASZCZ I HAVE WRITE THE NUMBER OF ECU TO MY FIRST POST......
YES MATE I TRIED TO TAKE OUT THE KEYBOARD AFTER STARTING THE CAR BUT WHEN I PULL OUT THE BATTERY OF THE CAR AND PUT IT AGAIN BACK IT REQUIRES CODE TO START....
d.zio
14th May, 2011, 06:14 PM
SOLUTION TESTED......
1)TAKE OUT THE KEYBOARD
2)READ THE HC11A1 MCU WITH UPA(I DID CONNECTIONS LIKE HC11A8-E9)
3)PROGRAMM MCU ALL EEPROM WITH FF
4)START THE CAR
:top:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.