PDA

View Full Version : immo bmw 523i e39



javilette
25th May, 2011, 10:07 PM
i i have this car i need calculate check sum in the file which immo off somebody can i help me whit this please i put the original file and the file whith immo off. it is a 523i e39 benzina whith ecu siemens ms41.0 the meroy is a tms28f200BZ i read whith beeprog.

regars.

grinovsky
25th May, 2011, 10:16 PM
the ori is good
but the immo off dump is poor,impossible that start engine

javilette
25th May, 2011, 10:32 PM
is true . i clear the immo whith data explorer and whith immo decoding 2.0 and dont change anything in the original file, why????

oep
25th May, 2011, 10:47 PM
Here and report.

:)

grinovsky
25th May, 2011, 10:47 PM
i think it can be repaired

lupu_sandu
25th May, 2011, 10:54 PM
grinovsky (http://www.digital-kaos.co.uk/forums/members/193009-grinovsky/): Why this immo off is poor?

oep
25th May, 2011, 10:55 PM
hmmmm 1:0 ..

javilette
25th May, 2011, 10:55 PM
yes but the problem is ews i can conect whith diag machine all are well but the electricman touch the ews and it broken somethink in the ews i dont have any ews whith the same hw for clone and the customer say to me that i remove the immo.

javilette
25th May, 2011, 10:57 PM
thank you oep but you r file is the same of the original i need put immo off too

oep
25th May, 2011, 11:02 PM
U'r right, wrong file ziped. Here u go..
As for ews, remove it and make bridge with one wire.

grinovsky
25th May, 2011, 11:07 PM
grinovsky (http://www.digital-kaos.co.uk/forums/members/193009-grinovsky/): Why this immo off is poor?
because winols can't reconised cks of this dump
but the ori is reconised by winols without any probleme
so if the mod file will flashed in ecu the processore will not communicate with his chip

javilette
25th May, 2011, 11:09 PM
the v2 is the same file too , khow 1 you oep???

oep
25th May, 2011, 11:12 PM
javilette: put v2 in mcu, car start.

grinovsky
25th May, 2011, 11:15 PM
try with this m8 and repport for result
pw.......pm

javilette
25th May, 2011, 11:16 PM
sorry i dont see the change thank you i try tomorow and post the result

grinovsky
25th May, 2011, 11:30 PM
after i send you pm you will see the change

grinovsky
25th May, 2011, 11:38 PM
lupu say some think please

lupu_sandu
25th May, 2011, 11:40 PM
16 posts for one check-sum?
grinovsky (http://www.digital-kaos.co.uk/forums/members/193009-grinovsky/): In most cases you need to have original file to correct checksum on one modified file.

PS: Yeah, immo-off from 1st post was good, but no checksum.
Original checksum: 45 42
Corect checksum for immo off file: FA 18

grinovsky
25th May, 2011, 11:49 PM
it's difference here lupu
it's not probleme of wrong cks no
the probleme is that BMW had protected his dump to be immo off
this is the probleme

javilette
26th May, 2011, 02:29 PM
well the v2 works ok no problem the cars stars whithout problem thank you

oep
26th May, 2011, 02:49 PM
You're welcome.

1:0 :cheer:

antioqueno
28th May, 2011, 09:27 PM
try with this m8 and repport for result
pw.......pm

plis the pass
thanks