CITROEN C2 VTS IMMO OFF

[ernesto1670]

Hello `s dk
I have a Citroen C2 1.6 16
ECU: ME7.4.4
0261207999

I need to remove the immobilizer. If not in the (flash 29F400) or (eprom 95160)
Attached the two readings.
I appreciate the help

[adam28]

Here mate,your off files. Dont forget to cut F3 and F4 in middle connector of ECU

[ernesto1670]

Program the 95160 29f400 and the files you sent me, cut f3 and f4 and the car will not start.

[elosomaloso]

Look here

http://www.digital-kaos.co.uk/forums/f178/m7-4-4-immo-off-needed-picasso-168413/

[ecufix]

Here mate,your off files. Dont forget to cut F3 and F4 in middle connector of ECU
On the c2 I dont have f3 f4 in the harness and car dont start, however on a peugot 207 with the same ecu loaded the dumps cut the wires car starts , thanks for that but still need solution for c2
please regards

[ecufix]

please Adam

[adam28]

please Adam


Hi mate

Sorry i dont have other solution.

[ecufix]

thanks anyway .

[ecufix]

Using software for the peugot me7.4.4 the C2 is threatening to start ,I have spark and injection pulse as well as fuel pressure . No diagnostic scan has been performed whilst using above mentioned software .Question is , are the timing plates and other tdc references the same ?
regards

[ecufix]

Car (C2) started using peugot ecu with adams28 immo software
So as far as I can figure out , m7.4.4 does appear to be the same . thanks all for help
best regards