PDA

View Full Version : xprog-m hc05 help


iqcaraudio
20th June, 2011, 07:48 AM
I receive this error message on xprog-m
The Motorola HC05 MC68HC05L28 curently is not suported on Windows NT system

I am using win xp

any ideas?
Zmann
20th June, 2011, 08:51 AM
On Xprog aspect, NT=XP
iqcaraudio
20th June, 2011, 03:34 PM
On Xprog aspect, NT=XP

what do you mean by xprog aspect?
Zmann
20th June, 2011, 04:01 PM
You're running Xprog on XP then it says NT. So NT in term of Xprog is XP.
iqcaraudio
20th June, 2011, 04:11 PM
You're running Xprog on XP then it says NT. So NT in term of Xprog is XP.

yes i'm running it on xp and I know that xp is based on win nt system... my problem is it says error message that 68hc05 is not compatible with windows nt system, any ideas on how to fix this problem? thanks!
Zmann
21st June, 2011, 04:50 AM
My replies may be too short, now I make my short answer longer.The error was that when L28 MCU selected Xprog has detected whether the OS of NT or XP it can't run on either of these but the program only says singly as NT. Run it on Windows 98 or use UPA as you ask on another thread.
iqcaraudio
21st June, 2011, 05:01 AM
My replies may be too short, now I make my short answer longer.The error was that when L28 MCU selected Xprog has detected whether the OS of NT or XP it can't run on either of these but the program only says singly as NT. Run it on Windows 98 or use UPA as you ask on another thread.

ok thank you sir....
sosmecano
24th June, 2011, 03:39 PM
HOW TO REED MCU HC05 I HAVE X-pROG 5 AND QFP64 ADAPTATEUR
bytemans
16th August, 2011, 03:08 AM
X-prog work fine on win XP . Error message is unknown to me. maybe there is a problem in the installation.
gselectric
6th August, 2013, 04:38 PM
any fix or sollution sir i have same issue?
smirnoff_rules
31st October, 2016, 05:30 PM
getting the same , doing my head in now lol tried on xp and win7 and win10 tried 5.0 5.3 all do the same
its about to go in the bin

https://i.gyazo.com/aaa1e71a1f23e76e1e4ddd6d78138de9.png
smirnoff_rules
31st October, 2016, 08:41 PM
sort that out now . the unit was 5.51 , l know this ecu mpc is no good so didnt get a read , l wanted to test xprog so l added a 95160 from the edc16 to read and says error 5 6 7 8 ? l know the solders fine or am l missing something lol l have minipro and thats no program ?

l just moved to other side and tested and the same fault to the letter ?

https://i.gyazo.com/4d009022db5c3b7c826944d47a5a0ae8.png