IAW 48P.10 9634496280 29F200BB 25080 INMOFF

[reproteq]

need help for remove inmo total.
add 29f200bb + 25080

thks.

[Shmortz]

Hi, I need solution for the same ECU, reset or total remove... help me to do it please...
there are not DTC's, just some ??? or --- in all the measuring blocks and the engine don't start, I was told that is i*mo problem, is that correct?
Already try to do reset in 29F200BB with otocheck, but the problem is still the same...

[klakier]

need help for remove inmo total.
add 29f200bb + 25080

thks.

test and report.

[Shmortz]

here is my dump 25080, make immo off please

I also need to know were to cut immo wire...

[klakier]

try and report !


BR

[Shmortz]

still no success, I cut the lines between ECU and BSI before try with inmo off dump but nothing changed, still ??? in measuring blocks, no errors in bot ECU and BSI and the car don't start. I was told that is locked condition of ECU and can be verginised or removed inmo from ECU

here is the AM29F200BB memory dump please help

[klakier]

still no success, I cut the lines between ECU and BSI before try with inmo off dump but nothing changed, still ??? in measuring blocks, no errors in bot ECU and BSI and the car don't start. I was told that is locked condition of ECU and can be verginised or removed inmo from ECU

here is the AM29F200BB memory dump please help

tryyyyyyyyyyyyy. ................

[Shmortz]

Unfortunately this was the first thing I tried to do, but without result

[klakier]

try. I don't have another idea. Maybe another member DK help you