Log in

View Full Version : nokia 6303c is dead



trent1579
14th August, 2011, 02:33 PM
hi guys,

i have tried to upgrade firmware on my nokia 6303c with ovi and now the phone is completely dead no response at all from the phone

will JAF recovery fix this problem or MXKEY does anybody have a link to this software?

cheers

Jim.Mahoney
14th August, 2011, 09:43 PM
hi guys,

i have tried to upgrade firmware on my nokia 6303c with ovi and now the phone is completely dead no response at all from the phone

will JAF recovery fix this problem or MXKEY does anybody have a link to this software?

cheers

I have never had a phone faulty after flashing via Ovi or PC Suite! Did the battery drop out or something??

trent1579
15th August, 2011, 09:39 AM
theres always a first!

Jim.Mahoney
15th August, 2011, 11:39 AM
theres always a first!

There shouldn't be as Nokia Updater has recovery mode built in!!

JAF Software with Emulator: http://rapidshare.com/files/246193648/jaf_1.98.62_setup.exe

Once installed remember to install P-Key drivers or emulator may not work!

Flash files: Blue-Nokia.com by Obnoxy (http://www.blue-nokia.com)

Only ever use same or higher firmware version!

teerak2uk
16th August, 2011, 05:35 AM
Jaf i think is too old for 6303 and mx key requires hardware
and the chances are you may need to use an fbus cable
with tx2line to revive it

teerak2uk
16th August, 2011, 05:37 AM
You from Nottingham?

Jim.Mahoney
16th August, 2011, 09:11 AM
I've flashed many 6303 with JAF using USB and JAF 1.98.62 has RM-443 listed.

Unless he needs to write PM files, USB should do the trick.

teerak2uk
16th August, 2011, 09:13 AM
didn`t think it would support it as JAF has been a dead product for a long time now

Jim.Mahoney
16th August, 2011, 10:31 AM
didn`t think it would support it as JAF has been a dead product for a long time now

It just shows how long the 6303 has been around! :)

freeman2001
19th August, 2011, 01:11 AM
u need fbus cable to repaire your phone mate

mt can do job










wbr