Ford KA 2011

[drpeter]

Ford Ka 2011 is coming in, do I have to remove the needles or is the 93C56 on the back?

Thanks

[super jumbe]

You might not have to remove any thing only OBD with Ford Tool - Programmer KM / erasing CRASH.

Good investment?????.

smok.com???????..

:party:

[drpeter]

You might not have to remove any thing only OBD with Ford Tool - Programmer KM / erasing CRASH.

Good investment?????.

smok.com???????..

:party:

You have to remove the dash! It is KA not Kuga!

[marcio1758]

this panel ford KA 2011 VDO is an eeprom 93C56, 0000 and end 0020, equal to corolla 2006! have to remove the hands, no componet ago!

[drpeter]

this panel ford KA 2011 VDO is an eeprom 93C56, 0000 and end 0020, equal to corolla 2006! have to remove the hands, no componet ago!

Thanks I know, never mind, I will see if the needles have to be removed or not.

[z786]

Thanks I know, never mind, I will see if the needles have to be removed or not.

your question was answered


have to remove the hands

[marcio1758]

Thanks I know, never mind, I will see if the needles have to be removed or not.

Yes, the needles have to be removed, no component ago, and no contacts for connecting a cable SW13!

[drpeter]

Yes, the needles have to be removed, no component ago, and no contacts for connecting a cable SW13!


Ok I didn't understand now its clear thanks.

[Apolo29]

Be gentle when remove display

[blacklisted]

can someone explain why the needles have to come off

future reference

[z786]

can someone explain why the needles have to come off

future reference

for future reference why dont you READ whats in front of you?

needles off = eeprom behind them

[n599fbm]

Hi Dpeter,

This is the dump, 93c56, so that you compare.
Important, with removing the panel, The display flex is the same at the Corsa (2003) 93c56,


C.

[drpeter]

Hi Dpeter,

This is the dump, 93c56, so that you compare.
Important, with removing the panel, The display flex is the same at the Corsa (2003) 93c56,


C.

Thanks, I already made a script for this car last year converted to new upa soft this year.

[dashtec]

the cluster is pretty tight, and dashboard gets marked very easy, so be careful, also you will find it easy if you remove the steering column shroud

needle need to be removed, but the whole job is easy, no real complication

[drpeter]

the cluster is pretty tight, and dashboard gets marked very easy, so be careful, also you will find it easy if you remove the steering column shroud

needle need to be removed, but the whole job is easy, no real complication

I did the car, guess what? It looked the same like a fiat cluster (doblo etc...), opened it and found a atmel 25C080 with fiat algo. Edit km with fiat script, worked ok, tried afterwards with fiat obd tool (superprog) didn't work. A ford with a fiat VDO cluster lol. No 93C56 this time.

[autofan1965]

I did the car, guess what? It looked the same like a fiat cluster (doblo etc...), opened it and found a atmel 25C080 with fiat algo. Edit km with fiat script, worked ok, tried afterwards with fiat obd tool (superprog) didn't work. A ford with a fiat VDO cluster lol. No 93C56 this time.

New Ford KA is brother from Fiat 500.

[obdmaster]

New Ford KA is brother from Fiat 500.

Has anyone tried a 2011 ford ka (fiat 500) by obd.

Tried today using carprog and fiat adaptor it connected eventually after lots of connection error , read mileage, but wouldnt write successfully. Anyone else had problems with this vehicle by obd????

Ive ordered abrites version so going to try that tomorrow.

Fingers crossed

Just read this:

http://www.codecard.lt/carprog/software/carprog-dash/fiat-new-by-obdii-qubo-fiorino-grande-punto-peugeot-bipper-citroen-nemo-odometer-programming-by-obdii/prod_481.html

Quote "fiat 500 2006+ only increase odometer"


ooooooooooooppps lol

[mastaflex]

Has anyone tried a 2011 ford ka (fiat 500) by obd.

Tried today using carprog and fiat adaptor it connected eventually after lots of connection error , read mileage, but wouldnt write successfully. Anyone else had problems with this vehicle by obd????

Ive ordered abrites version so going to try that tomorrow.

Fingers crossed

Just read this:

Fiat new by OBDII - Qubo, Fiorino, Grande Punto, Peugeot Bipper, Citroen Nemo odometer programming by OBDII (http://www.codecard.lt/carprog/software/carprog-dash/fiat-new-by-obdii-qubo-fiorino-grande-punto-peugeot-bipper-citroen-nemo-odometer-programming-by-obdii/prod_481.html)

Quote "fiat 500 2006+ only increase odometer"


ooooooooooooppps lol


AVDI works 100% on this car via OBD

[obdmaster]

AVDI works 100% on this car via OBD

Even take mileage down m8????

Cause carprog says "FIAT 500 only increase odometer"

Usually when one tool says only increase odometer, all tools usually work same way???

[mastaflex]

just tested it one week ago mate , also tested on peugeot bipper 2011. 100%OK

[obdmaster]

Ok tried with AVDI it would read mileage but not write either less miles or more.

I contacted carprog support and they said i used wrong adaptor i should of used the volvo ford lead and not the fiat lead like i did.

So i tried carprog again but this time with volvo ford lead, no comms. Thought codecard made carprog??? And if they do why they telling me to use wrong adaptor???

Tried again with fiat lead found it wouldnt write less a value, but it would move mileage forward (tested).

So it seems like codecard website says fiat 500 only increase odometer also applys to new ford ka as suspected.

Im going to send logs to abrites see what they can do, its a mates car. So no rush.