!!burn xgd3 to any dvd+r dl!! not my tut!!

[djjwdubz]

Hi friends,

Greetings from China We made serveral tests and found some secrets...

TO FULLY BURN XGD3 ON A 15-CENT-PRICED DISC (very common RICOHJPN-D01-67 media, any brand is possible)

First of all, we must get a Lite-On iHASx24 DVD burner (or their clones such as ASUS DRW-24B3ST and so on) and flash iXtreme Burner Max firmware.

After flash, run ImgBurn 2.5.6.0.

0.As in iXtreme Burner Max official tutorial, turn on Tools -> Settings -> Write -> Perform OPC Before Write, because RICOHJPN-D01-67 media is forced to perform write at least 4x speed.
http://i52.tinypic.com/qxtr7r.jpg


1.Select "Write image file to disc" as usual.

2.Click "Advanced Settings" button in bottom right corner. (Marked red in screenshot)
http://i51.tinypic.com/316rsxg.jpg

3.Open Lite-On panel in Advanced Settings. It is required to click the individual "Change" button if you changed any setting item and a "Success" message will pop up to confirm the change.

- Turn on Online HyperTuning
http://i53.tinypic.com/iolsnn.jpg

- Turn on SmartBurn
http://i55.tinypic.com/33e7caw.jpg


- Turn off OverSpeed
http://i51.tinypic.com/2r7wltv.jpg


- Optionally turn on or off Force HyperTuning according to your disc quality
http://i53.tinypic.com/28jzhy0.jpg

Now you are ready to go! Enjoy XGD3 backups dear friends

Note that in our tests, some discs won't work at all even with all settings done!! Please try and buy another brand of disc if you encounter this.

!!please say if it works!!

press the thanks button on my 1st post 4 the guy, how about a thanks so, i can tell the guy who made it how many thanks he got from one site, in a private message!! i have already give him rep from me but, I'm sure he deserves a thanks aswell from here! if you wanna rep him for yourself then, pm me for the link on where to find him! can't send outside links here.

!!Way Two!!

This will fix it!!!! patch your games with this link http://www.digital-kaos.co.uk/forums/f14/all-individual-topology-patches-249106/

then flash your ihas with this edited c4evas fw iHAS-124B-AL0S-MKM001MKM003-final_AONE+RITEK+MKM003x2speed.bin (http://www.mediafire.com/?ljbsluehg44lr77) then restart your pc or laptop, this is for ihas 124b.

Then

Open IMGBurn and go to TOOLS>SETTINGS>WRITE. Clear the box that Performs OPC Before Write. Then go to TOOLS>SETTINGS>I/O and click Page 2 tab. Move buffer size between 71-73mb, Main Buffer Threshold to 25%, and Device to 50%. Press Ok
Prepare to burn (Write Image File To Disc). On this page you can change the setting to burn at 2.4x and advanced settings (settings area bottom-right of the three icons in that area). Go to Lite-On tab...In the Change For: dropdown-list you will disable Forced HyperTuning, Online HyperTuning, and OverSpeed. If not enabled, Enable SmartBurn. Press OK.
Burn your XGD3 and verify. It should verify at 100%.

This will fix it. the fw i posted is mine with my own link so i know its safe!! if you think its not safe do not use it.

all the edited fw does is lets aone and ritek disks burn at 2.4 speed, this will not ~~~~ your drive up. all dvd burners can burn at 2.4 speed, its just as good as c4s fw!

this will work for everyone, if you dont have a ihas124b pm me and i will edit the other fws so that these disks work for that burner!!!

[saj1985]

yes this what i used,
but make sure with imgburn you 'run as administrator'

[djjwdubz]

nice one bro, thanks for letting us no man, now i can get the drive lol. thanks!!

the only thing is, i use newsgroups and it takes the iso out for me!

[saj1985]

nice one bro, thanks for letting us no man, now i can get the drive lol. thanks!!

the only thing is, i use newsgroups and it takes the iso out for me!

no worries, went through about 15 coasters lol

[djjwdubz]

i use sabnzbd.exe!!

[cunny]

What's up here?

Are we talking about downloding illegal downloads or?

[saj1985]

What's up here?

Are we talking about downloding illegal downloads or?

nah mate, cunny you got your drive from ebuyer?

[maddy7]

Confirmed working with an Infiniti 360 Disc ID MBIPG101-R10-65. Burned and verified 100% at 4x GOW3 ISO. Installed to HDD no problem.

[KDC]

As tut states RICOHJPN-D01-67 aone's verifiying 100% by this method, happy days!

[samlen27]

y 'run as administrator' y not just dubble click and load img burn ?

[saj1985]

y 'run as administrator' y not just dubble click and load img burn ?

you'll get an error whilst trying to burn or verify ,
if ya dont run as admin, dont know if its just on win7

feel free to try it just by double clicking if ya liike buddy! :)

[samlen27]

it didnt work on arita but i didnt run as administrator will try again later and post again,if not look like i got to go find some verbs


tried again running as admin and still failed on verify at 49%

[maddy7]

Confirmed working with an Infiniti 360 Disc ID MBIPG101-R10-65. Burned and verified 100% at 4x GOW3 ISO. Installed to HDD no problem.

False alarm. After successfully burning one disc as above. Now I get
E 11:59:03 Optimum Power Calibration Failed! - Reason: Timeout on Logical Unit
E 11:59:03 Operation Failed! - Duration: 00:01:17

I also get write failures using the same discs and Deus Ex ISO that is verified in abgx360. It now fails at the layer break. In the past I have had no problems with these discs whatsoever. I'm using all the suggested settings. I powered the PC off once I started getting the new errors but it is the same afterwards.
Next step is to try some verbs but considerig I am now having problems burning none XGD3 games which I had absolutely no problems with before I'm not confident. If you look up the problem imgburn suggest FW first then media. Maybe the FW has been tweaked so much it will only reliably work with verbs? But it is possible to break drives when trying to push them to do more than they are designed to do???

I'm not having a go at all the work that has gone in to this CFW just relating my experiences so people can save their discs. If only Verbs work reliably that is the way to go and not bother buying cheaper discs. The only thing to suss is the correct settings for the different verb discs to get reliable burns.

[KDC]

False alarm. After successfully burning one disc as above. Now I get
E 11:59:03 Optimum Power Calibration Failed! - Reason: Timeout on Logical Unit
E 11:59:03 Operation Failed! - Duration: 00:01:17

I also get write failures using the same discs and Deus Ex ISO that is verified in abgx360. It now fails at the layer break. In the past I have had no problems with these discs whatsoever. I'm using all the suggested settings. I powered the PC off once I started getting the new errors but it is the same afterwards.
Next step is to try some verbs but considerig I am now having problems burning none XGD3 games which I had absolutely no problems with before I'm not confident. If you look up the problem imgburn suggest FW first then media. Maybe the FW has been tweaked so much it will only reliably work with verbs? But it is possible to break drives when trying to push them to do more than they are designed to do???

I'm not having a go at all the work that has gone in to this CFW just relating my experiences so people can save their discs. If only Verbs work reliably that is the way to go and not bother buying cheaper discs. The only thing to suss is the correct settings for the different verb discs to get reliable burns.
Sorry to hear you're having problems with infiniti discs mate but every burn i've had since using this tutorial has been successful, all burned and verified 100%. I'm using aone gold dl discs which are most likely the cheapest on the market, perhaps you could try them?

[nathan2007]

just out of interest the problems people are having, are they any particular drive revisions or is it just random ones?

[samlen27]

mines a 124b

[KDC]

mines a 124b
Also iHAS124 B... What discs are you using mate? -( edit- scratch that just seen you already mentioned arita.) As i've already stated try aone gold with this tutorial, works 100% for me.

[nathan2007]

just wondering if a certain revision hasd probs thats all going to do a lil research hmmmmmm.........

[samlen27]

ive just gone out and bought verbs but may try aone another time 1st verb i burnt was 100% succesful and kprobe check was fine aswell

[maddy7]

Sorry to hear you're having problems with infiniti discs mate but every burn i've had since using this tutorial has been successful, all burned and verified 100%. I'm using aone gold dl discs which are most likely the cheapest on the market, perhaps you could try them?

I've got Infiniti and Aone Gold Plus discs both having problems. My drive is a 124b

I've ordered some Verbs, I wanted to call somewhere and pick some up for testing but have time. I may get time tomorrow.

[frickerd]

im using aone with a 124 burner thanks to this tut burning at 4x 100 % for the last 6 burns and verified 100%

[nathan2007]

i have received my iHAS124 B this morning am going to flash hen i return home and give it a go later am very interested to see if it will work

[djjwdubz]

i merged this post to the (first/1st) post.

[smirnoff_rules]

is this a must have now then ? l did batman the other day on my 216 pioneer and seemed fine plus others , forza was the only problem but that might be the image ? or is it best to wait for a f/w update for the pioneer

[djjwdubz]

is this a must have now then ? l did batman the other day on my 216 pioneer and seemed fine plus others , forza was the only problem but that might be the image ? or is it best to wait for a f/w update for the pioneer

read the posts. its for memebers burning with other dvd dual layer types. if you buy verb disks then your all good. i have a drive like yours but the drive aint ment to burn the full iso on to the disks. the new dvd burner will fix that so its safe for xbox live, because the drive what we have only misses out 200mb from the iso what ms will see and kick our ass in to banned mode.

read for more info, this tut lets us use aone (and other brands) dvds not just verbs what c4eva told us to use. aones are just as good!

our pioneers work but are not live safe, all tho it burns but missing parts ms will see so flags will be given.

PS i don't use live on these new games and i still leave my internet lead in to play, peeps in my firends list ask me where i got that game from so, best thing to do is pull the internet lead out so you don't get others asking about it. do not tell in a message about flashing boxes because ms does read them and they will banned ya ass.

[djjwdubz]

oh, if your never gonna play online with the new xgd3 iso game then your ok, just don't copy the new forza or you will be flagged.

[smirnoff_rules]

l get it now , was wondering why my RICOHJPN-D01-67 disc,s were working . dont do online these days .. does forza play up because it uses that missing 200mb

[kr1s77]

I got a 324 drive, flashed it ok but I get errors on the new games. I have done everything in the tut, I'm using verbs :(

[m9g]

I get 100% sucessful on burn with verb and 124b drive but when I put in drive i get play game but no piccy, if i click on play game then screen goes black and then returns to dash. I have tried burning with and without this tut and still the same probs, I know my liteon drive in the box is reading backups caus i put backup of black ops in and it comes up fine.

Any ideas

[nathan2007]

m9g is it flashed with lt 2.0???????????

[kr1s77]

I turned off force hyper setting and it burned ok

[maddy7]

I must admit to being sceptical as to whether the Verbatim discs would be that much different than the Aone Gold plus and Infiniti discs I've used for ages without any problems pre 124b drive and CFW. But after having only one successfully burnt disc with the 124b drive and CFW I ordered some MKM-003-00 Verbatims which arrived today. I've burned and 100% verified two different ISOs so far at 4x using all the suggested settings. Both installed to HDD no problem. So I'm convinced that it's not worth bothering with other discs. Whilst some may have success using Aone and other discs and it may be that my drive is fussy I'm just going to stick with Verbatims in future.

[Hawkk]

I get 100% sucessful on burn with verb and 124b drive but when I put in drive i get play game but no piccy, if i click on play game then screen goes black and then returns to dash. I have tried burning with and without this tut and still the same probs, I know my liteon drive in the box is reading backups caus i put backup of black ops in and it comes up fine.

Any ideas

I have the same problem with Aones. Burn verifies ok using the tut but then won't install or play, just "play game".

I'm trying burning at 2.4x after using MCSE. Will report back to the community although it's perplexing that you have the same problem with Verbs. My verbs are still on order so can't test them yet.

Brand new burner + phat Liteon Xbox here.

[m9g]

m9g is it flashed with lt 2.0???????????

Funny you should say that

In the new fw pack i downloaded the old LT+1.1 is in there aswell as the LTPLUS-025-v2.0 and JF autoloaded it so i flashed it with the flash i already had on there DOH!!!! - spotted it when i decided to flash again

All working great now thanks :top:

[m9g]

I have the same problem with Aones. Burn verifies ok using the tut but then won't install or play, just "play game".

I'm trying burning at 2.4x after using MCSE. Will report back to the community although it's perplexing that you have the same problem with Verbs. My verbs are still on order so can't test them yet.

Brand new burner + phat Liteon Xbox here.


Re-flash it mate and check JF autoloads LTPLUS-025-v2.0 and not what mine did and put LT+1.1 back on

[Hawkk]

Re-flash it mate and check JF autoloads LTPLUS-025-v2.0 and not what mine did and put LT+1.1 back on

No I think it's the media because I'm playing GOW3 (truncated) and all other AP2.5 games fine.

When I burnt at 2.4x I actually got Ace Combat to work for some time and recognise the disc before it came up with dirty disc error. So I'm certain it's just that my 360 can't handle XGD3 burns on mediocre media. Here's hoping it's just that, anyway.

[Hawkk]

Well, there is the answer. Verb delivery arrived this morning, and, unsurprisingly, all XGD3 games are burning, installing and playing 100% on them.

[cunny]

Is anyone trying to verify thier burns in imgburn after a write?

I am getting failures verifying using aone discs

[KDC]

Is anyone trying to verify thier burns in imgburn after a write?

I am getting failures verifying using aone discs
My burns were failing verification at 49% with imgburn before this tutorial. Every burn since has verified 100%, i'm still using aone's.

[cunny]

Looking like i dint save the changes in advanced tab.

Thanks

[saj1985]

Looking like i dint save the changes in advanced tab.

Thanks

cunny you had any luck mate?

i find that with imgburn when i 'run as admin',
i get 100% verification, with aone gold plus discs!
try that if all else fails mate.

[KDC]

Looking like i dint save the changes in advanced tab.

Thanks
No problem mate, reckon thats where a few folks are going wrong. Save changes in advance tab is a must! Haven't had a single fail since.:beer:

[cunny]

They are passing now, will run a few through Kprobe to test quality.

[Plutonian78]

Sorry to hear you're having problems with infiniti discs mate but every burn i've had since using this tutorial has been successful, all burned and verified 100%. I'm using aone gold dl discs which are most likely the cheapest on the market, perhaps you could try them?

Can you please let me know how, as I'm having problems burning

Aone Gold dual-layer disks with liteon Ihas 124B AL0S

tryed with Imgburn everything as mentioned in the tutorial and does seem to work

[dragazar]

aone gold edition works ok for me also

[djjwdubz]

i have found a better way to burn and pass!!! let me no if you want it!!

this one is edited fw so the disk burns at 2.4 speed for aone and any other. i got all mine done from the new way 100%!!!

[DAVE466]

mine burns but fails at verivication at same point. Tried the settings but with no joy.
the game shows up on xbox but when ya load it, it just stays with the loading mark on it arrow going round

I 12:35:36 ImgBurn Version 2.5.6.0 started!
I 12:35:36 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 12:35:36 Total Physical Memory: 2,030,904 KB - Available: 1,263,088 KB
I 12:35:36 Initialising SPTI...
I 12:35:36 Searching for SCSI / ATAPI devices...
I 12:35:37 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (G:) (RAID)
I 12:35:37 Found 1 DVD?RW/RAM!
I 12:36:37 Operation Started!
I 12:36:37 Source File: D:\Xbox Games\Pro Evo 12\Pro Evolution Soccer 2012-XGD2-CS.dvd
I 12:36:38 Source File Sectors: 3,827,488 (MODE1/2048)
I 12:36:38 Source File Size: 7,838,695,424 bytes
I 12:36:38 Source File Volume Identifier: 13599
I 12:36:38 Source File Volume Set Identifier: ceee8000MS UDFBridge
I 12:36:38 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 12:36:38 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 12:36:38 Source File File System(s): ISO9660, UDF (1.50)
I 12:36:38 Destination Device: [2:0:0] ATAPI iHAS124 B AL0S (G:) (RAID)
I 12:36:38 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)
I 12:36:38 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 12:36:38 Destination Media Sectors: 4,267,040
I 12:36:38 Write Mode: DVD
I 12:36:38 Write Type: DAO
I 12:36:38 Write Speed: 4x
I 12:36:38 Link Size: Auto
I 12:36:38 Lock Volume: Yes
I 12:36:38 Test Mode: No
I 12:36:38 OPC: Yes
I 12:36:38 BURN-Proof: Enabled
I 12:36:38 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 12:36:38 Book Type Setting: DVD-ROM
I 12:36:38 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 12:37:07 Optimal L0 Data Zone Capacity: 1,913,760
I 12:37:07 Optimal L0 Data Zone Method: Copied From Original Disc
I 12:37:09 Set L0 Data Zone Capacity Succeeded!
I 12:37:11 Filling Buffer... (20 MB)
I 12:37:15 Writing LeadIn...
I 12:37:17 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 12:37:17 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 12:37:17 Writing Layer 0... (LBA: 0 - 1913759)
I 12:49:09 Writing Layer 1... (LBA: 1913760 - 3827487)
I 13:01:03 Synchronising Cache...
I 13:01:06 Closing Track...
I 13:01:07 Finalising Disc...
I 13:01:41 Exporting Graph Data...
I 13:01:41 Graph Data File: C:\Users\Dave\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_19-JANUARY-2012_12-36_RICOHJPN-D01-67_4x.ibg
I 13:01:41 Export Successfully Completed!
I 13:01:41 Operation Successfully Completed! - Duration: 00:25:03
I 13:01:41 Average Write Rate: 5,371 KB/s (3.9x) - Maximum Write Rate: 5,728 KB/s (4.1x)
I 13:01:41 Cycling Tray before Verify...
W 13:01:49 Waiting for device to become ready...
I 13:02:03 Device Ready!
I 13:02:04 Operation Started!
I 13:02:04 Source Device: [2:0:0] ATAPI iHAS124 B AL0S (G:) (RAID)
I 13:02:04 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67)
I 13:02:04 Source Media Supported Write Speeds: 4x, 6x, 8x
I 13:02:04 Image File: D:\Xbox Games\Pro Evo 12\Pro Evolution Soccer 2012-XGD2-CS.dvd
I 13:02:04 Image File Sectors: 3,827,488 (MODE1/2048)
I 13:02:04 Image File Size: 7,838,695,424 bytes
I 13:02:04 Image File Volume Identifier: 13599
I 13:02:04 Image File Volume Set Identifier: ceee8000MS UDFBridge
I 13:02:04 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 13:02:04 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 13:02:04 Image File File System(s): ISO9660, UDF (1.50)
I 13:02:04 Read Speed (Data/Audio): MAX / MAX
I 13:02:05 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 13:02:05 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 13:02:05 Verifying Layer 0... (LBA: 0 - 1913759)
W 13:13:12 Miscompare at LBA: 1304000, Offset: 0
W 13:13:12 Device: 0xBB
W 13:13:12 Image File: 0x57
W 13:13:12 Total Errors in Sector: 2,026
I 13:13:12 Verifying Sectors...
W 13:13:18 Miscompare at LBA: 1304001, Offset: 0
W 13:13:18 Device: 0xE0
W 13:13:18 Image File: 0x5B
W 13:13:18 Total Errors in Sector: 2,036
I 13:13:19 Verifying Sectors...
W 13:13:20 Miscompare at LBA: 1304002, Offset: 0
W 13:13:20 Device: 0x52
W 13:13:21 Image File: 0x81
W 13:13:21 Total Errors in Sector: 2,041
I 13:13:21 Verifying Sectors...
E 13:13:22 Miscompare at LBA: 1304003, Offset: 0
E 13:13:22 Image File: 0x03
E 13:13:22 Total Errors in Sector: 2,039
E 13:13:22 Failed to Verify Sectors!
I 13:13:23 Exporting Graph Data...
I 13:13:23 Graph Data File: C:\Users\Dave\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_19-JANUARY-2012_12-36_RICOHJPN-D01-67_4x.ibg
I 13:13:23 Export Successfully Completed!
E 13:13:23 Operation Failed! - Duration: 00:11:17
I 13:13:23 Average Verify Rate: 3,857 KB/s (2.8x) - Maximum Verify Rate: 13,790 KB/s (10.0x)
I 13:17:17 Operation Started!
I 13:17:17 Source Device: [2:0:0] ATAPI iHAS124 B AL0S (G:) (RAID)
I 13:17:17 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67)
I 13:17:17 Source Media Supported Write Speeds: 4x, 6x, 8x
I 13:17:17 Image File: D:\Xbox Games\Pro Evo 12\Pro Evolution Soccer 2012-XGD2-CS.dvd
I 13:17:17 Image File Sectors: 3,827,488 (MODE1/2048)
I 13:17:17 Image File Size: 7,838,695,424 bytes
I 13:17:17 Image File Volume Identifier: 13599
I 13:17:17 Image File Volume Set Identifier: ceee8000MS UDFBridge
I 13:17:17 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 13:17:17 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 13:17:17 Image File File System(s): ISO9660, UDF (1.50)
I 13:17:17 Read Speed (Data/Audio): MAX / MAX
I 13:17:18 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 13:17:18 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 13:17:18 Verifying Layer 0... (LBA: 0 - 1913759)
E 13:22:31 Miscompare at LBA: 1304000, Offset: 0
E 13:22:31 Device: 0xBB
E 13:22:31 Image File: 0x57
E 13:22:31 Total Errors in Sector: 2,026
E 13:22:31 Failed to Verify Sectors!
I 13:22:32 Exporting Graph Data...
I 13:22:32 Graph Data File: C:\Users\Dave\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_19-JANUARY-2012_13-17_RICOHJPN-D01-67.ibg
I 13:22:32 Export Successfully Completed!
E 13:22:32 Operation Failed! - Duration: 00:05:13
I 13:22:32 Average Verify Rate: 8,358 KB/s (6.0x) - Maximum Verify Rate: 13,760 KB/s (9.9x)

[djjwdubz]

This will fix it!!!! patch your games with this link http://www.digital-kaos.co.uk/forums/f14/all-individual-topology-patches-249106/

then flash your ihas with this edited c4evas fw iHAS-124B-AL0S-MKM001MKM003-final_AONE+RITEK+MKM003x2speed.bin (http://www.mediafire.com/?ljbsluehg44lr77) then restart your pc or laptop, this is for ihas 124b.

Then

Open IMGBurn and go to TOOLS>SETTINGS>WRITE. Clear the box that Performs OPC Before Write. Then go to TOOLS>SETTINGS>I/O and click Page 2 tab. Move buffer size between 71-73mb, Main Buffer Threshold to 25%, and Device to 50%. Press Ok
Prepare to burn (Write Image File To Disc). On this page you can change the setting to burn at 2.4x and advanced settings (settings area bottom-right of the three icons in that area). Go to Lite-On tab...In the Change For: dropdown-list you will disable Forced HyperTuning, Online HyperTuning, and OverSpeed. If not enabled, Enable SmartBurn. Press OK.
Burn your XGD3 and verify. It should verify at 100%.

This will fix it. the fw i posted is mine with my own link so i knwo its safe!! if you think its not safe do not use it.

all the edited fw does is lets aone and ritek disks burn at 2.4 speed, this will not ~~~~ your drive up. all dvd burners can burn at 2.4 speed, its just as good as c4s fw!

this will work for everyone, if you dont have a ihas124b pm me and i will edit the other fws so that these disks work for that burner!!!

[djjwdubz]

yes this what i used,
but make sure with imgburn you 'run as administrator'

no need for that now bro!!!

[DAVE466]

will give it a try. the game that i was writing was pro evo 12 which isn't in the list of patches?

[djjwdubz]

thats a non ap2.5, you dont need the patches for that. you can use a normal burner for that. i done that game last night.

[DAVE466]

I've just done as said and burnt it at 2.4 and it says reading then open tray?? Any ideas now?

[djjwdubz]

what dashboard you got? have you got 3.0?

[DAVE466]

aye on the new dash and flashed with lt3.0 mate.

[cunny]

Cheap media :( Run a burnt iso through KPROBE and see the results for yourselves.

Max PI Should not be higher than 100 and PFI should be no higher than 4. If higher on some machine then can run.

I have seen discs like aone fail badly with the same settings i use for verbs. Same reason i posted a while back. The outter ring of the disc, you know the 1 conventional burners wont use? Well its used to burn XDG3.

Try the settings i posted the other night with a verb. Run through Kprobe and see if they pass

[dragazar]

My aone golds burn at 4x no errors after verify all fine. odd disc dont work but at least 90% of them work at 4x with c4eva firmware from latest packon ihas124b

Any other tools i can use to verify the image on my disc after it has been verfied by IMGBURN ??

[speedracermm]

hello can anybody help me plz? i used djjwdubz (http://www.digital-kaos.co.uk/forums/members/25403-djjwdubz/) FW but imgburn writing leadin and nothing else happens. i use maxell dl(ritek) external writer ihas 124b,win7

thx

[djjwdubz]

what media id is the dvd you are using? it might not be the same as the id i edited.

[bigvdaking]

if u flash the 124 b u can burn the cheap ones and they burn at 4 speed 100 percent every time

[djjwdubz]

if u flash the 124 b u can burn the cheap ones and they burn at 4 speed 100 percent every time

what disks you using?

[WBM]

I have a IHAS 324b drive can I still use the custom firmware 124b for my Ihas? I have aone gold edition disks. Also should I burn at 2.4x or 4.0?

[djjwdubz]

yea you can cross flash your drive! if you put the fw on then it will only burn at 2.4 speed even if you put it on 4 speed.

[m3kal]

hi if i flash my ihas burner with your fw for aones etc will image burn some up with the truncate message ? or will it just burn 2.4 ? thanks. my burner in my pc is HL-DT-ST DVDRAM GH60N so i dont think i can cross flash that? ill use ihas burner and see how it goes

[djjwdubz]

imgburn knows what drive your burning with, it will not show the message!

some drives can be flashed with other brands fws, if your going to try then make sure you back up your fw b4 you try swap it. good luck with that!!

[m3kal]

thanks will test and see

[7anafy]

Best solution to fix xbox 360 (Unsupported disc)..and playing any xgd3 game ever !! - YouTube (http://www.youtube.com/watch?v=sb2nykp6Hgo)

I heard that this is a good solution to fix unsupported discs , and play any xgd3 game on ur LT 2 and to burn discs... but not tested online yet,so its unsafe online

[freck]

I'm using the patch method and so far so good,no coasters.
Binary Domain and Metal Gear Solid playing fine on Liteon 2.0(offline).
Using Verbs btw and latest imgburn(Truncating)
If your a bit dubious about the patching on iso's you can always run them tru ABGX and your iso is unpatched and re injected with topology.
Freck

[shandybasshead]

What does OPC do?

[davicmeira]

I've tried but i didn't managed to do that..

[samlen27]

i put the firmware on mine last night and it burnt the game and verified 100% but the xbox wont play it it says play game but no picture loads up and wont play (im using aone plus gold edition) anyone had same problem and managed to fix?

[cunny]

i put the firmware on mine last night and it burnt the game and verified 100% but the xbox wont play it it says play game but no picture loads up and wont play (im using aone plus gold edition) anyone had same problem and managed to fix?

Yup....Use Verbs

[cunny]

What does OPC do?

OPtimum Power Calibration

[shaunfree]

hi all,looking at LiteOn iHAS124 C version when i look at c4eva the max burner firmware is only 4 B models,just wanted to no before i buy one can a C model be flashed with B firmware many thanks.

[cunny]

no, has to be b revision or look at the crossflash list on c4eva speaks

[shaunfree]

many thanks cunny u saved me ? mate

[fraggit]

This worked for me, thank you....but I wouldn't use the ricoh discs online though, test with Kprobe and you'll see what I mean (shocking results) and that was burning with original burner max firmware at 4x and at 2.4x with the modified firmware on here. Fine for me though, I rarely play online and if i did, I'll be using my Verbatim discs. I'm using a ASUS DRW-24B3ST spoofed/crossflashed as a Lite-On iHAS124. For UK members, I got the ASUS DRW-24B3ST from Amazon for 17 quid as of 30th July 2012 :)

[sonystar]

Tried it today with Optiarc DVD RW AD7240 and RICOHJPBN-D01-67 and the option Truncate, no luck. Don't know if my burner is a clone of the iHas drive.

Will try to find if it is.

[fraggit]

@sonystar
If you have flashed the burner max firmware properly, you don't get a truncate option. As far as I know, these are the only drives that can be crossflashed to Ihas.
ASUS
DRW-24B3LT
DRW-24B3ST
DRW-24B1LT*
DRW-24B1ST*

Dell
PLDS DH-16ABS

HP
DVD1270i*
DVD1260i*

Lite-On
iHAS122*

Plextor
PX-L890SA

TEAC
DV-W524GSB

[cunny]

c4eva Speaks! | automated irc logs, updated instantly whenever and wherever c4eva speaks (http://c4evaspeaks.com/)

Have a look at the firmware table for full list of latest fw and known crossflashable drives