bmw 318 1.9cc bms46 ecu how to read with galleto

[johnie-9]

Hi guys!Has anybody tryied to read a bosch bms46 ecu with galleto1260 and succeeded?It's on a bmw 318 1.9 cc engine with ews 3.

[easytech]

no problem reading/writing with Galetto1250

[johnie-9]

no problem reading/writing with Galetto1250
I 'm trying to read it on the bench but I can't.Does that kind of ecu has special pin connection?

[easytech]

K1 pin 5,6 GND
K1 pin 1,2,7,8,9 +12v
K1 Pin 3 K-Line

[johnie-9]

I connected it that way,but it shows the following error message:errore invio INIT1:-5. It also opens a window inside saying:turn 10sec off and turn on the dashboard wait 10sec before continiue.Is there a possibility that I have to connect the ews3 as well,or read it with xprog?

[easytech]

Power supply at least 13v.
I did a lot on the bench no problems but sometimes galetto give problems with some PC or laptop USB ports.
Try another PC.

[johnie-9]

Hi friend!I 've put 13,4volts, but nothing happened.It could be because my galletto is a clone,I don't know.Do you think I could read it with xprog,or INPA EDIABAS?I am thinking of something else too:is it possible that it wants the EWS3 connected, or a universal CAN immo emulator for opening the program?