View Full Version : Ford transit 2007 FOMOCO
eiemax
31st January, 2012, 09:29 AM
Hello.
I have read the file of a ford TRANSIT 2007, 2400cc and 140hp. With ECU FoMoCo. I have read with MAGPro2 ver. 4.2.
The data that has read the MAGPro2 are:
Checksum: BCC4
HW: 6C11-12B694-CB
SW: 6c11-12A650-CK
INFO: GSC-5.0-ST10F276
INFO: 6c11-12K532-MH
I want to know if the file that I read, it's ok or incomplete, because ecm not the right numbers, but only incomprehensible signs:
Ford TDCi Visteon
Num SW: ??????
Num HW: ????
------------------------------
Cks: AD66
Size: 917504 = 0xE0000
why? :motz:
I may know how to exclude the egr from the map?
I have no driver for this ECM ECU, which addresses are to edit the file?
Thanks in advance friends :wavey:
powertdi
1st February, 2012, 10:23 PM
I think its correct, but OLs cant find cks automatic. Maps look correct .I never did Fomoco from Big transit, but small transit conect maps look same.
eiemax
1st February, 2012, 10:36 PM
You know I give the addresses, and how to close the EGR?
thanks
P.S: with MAGPro2 the checksum is automatically
ominimicu
2nd February, 2012, 12:05 PM
i did one of those..and it was like 800kb but i wrote it..and everything went fine.
eiemax
2nd February, 2012, 12:57 PM
You have the addresses for this ECU?
thanks
eiemax
5th February, 2012, 09:24 AM
Nobody has any idea about the address?
thanks
LaraVAG
6th February, 2012, 04:09 PM
Read correct, its visteon ECU some of maps:
Turbo pressure:
B4fCE 16x16 (1 of 4)
B5C8E 16x16 (1 of 4)
B694E 16x16 (1 of 4)
SOI
B0400 16x16 ( 1 of 8 )
SOI limiter
B1D80 16x16 (1 of 4 )
Nm to mg
98000 16x16 (1 of 5)
AEAEA 16x16 (1of 7)
TOI ?
BAe36
CR pressuer
A8b82 16x16 (1 of 8)
and meny more
eiemax
6th February, 2012, 10:47 PM
Thanks friends...
I did not understand what are the definitions:
SOI, Nm to mg, TOI ?,
CR pressuer, is common rail pressure?
you know to close the egr on this file?
thanks in advance
filecloud
7th February, 2012, 09:34 AM
I think its correct, but OLs cant find cks automatic. Maps look correct .I never did Fomoco from Big transit, but small transit conect maps look same.
Hello
This is not correct! Winols detects the checksum perfect. OLS811 Visteon ST10. And the checksum is fine.
It would be fair not to post such false statements based on clone tools or far outdated cracked programs as a referrence.
Some people here may consider to buy the tools legally because they want to work on a professional basis. For them it is important to get valuable feedback. Winols handles the file fine, Alientech KessV2 and others can read and write the file fine; And the flashtool also takes care about the checksum.
greetings,
filecloud
LaraVAG
8th February, 2012, 08:21 PM
CR preesure - Common Rail Pressure
SOI - Start of Injection
TOI - Time of Injection
Nm to mg - conversion map
eiemax
8th February, 2012, 11:12 PM
you know the address of 'EGR?
thanks
J_amb_o
26th February, 2012, 12:27 AM
Hi All, read the attached file with genuine Magpro2, can someone help with map locations please? Never done one before.
J.
javiercj
10th May, 2012, 11:49 AM
Hello.
I have read the file of a ford TRANSIT 2007, 2400cc and 140hp. With ECU FoMoCo. I have read with MAGPro2 ver. 4.2.
The data that has read the MAGPro2 are:
Checksum: BCC4
HW: 6C11-12B694-CB
SW: 6c11-12A650-CK
INFO: GSC-5.0-ST10F276
INFO: 6c11-12K532-MH
I want to know if the file that I read, it's ok or incomplete, because ecm not the right numbers, but only incomprehensible signs:
Ford TDCi Visteon
Num SW: ??????
Num HW: ????
------------------------------
Cks: AD66
Size: 917504 = 0xE0000
why? :motz:
I may know how to exclude the egr from the map?
I have no driver for this ECM ECU, which addresses are to edit the file?
Thanks in advance friends :wavey:
Hello
I do have the same unit fomoco6c11-12a650 of Ford Transit 07-08 2400cc
and I need to read the unit to clon it....can you tell me the conexions and the interfaz you?ve used?
thank you very much
i wait for your reply
eiemax
10th May, 2012, 12:32 PM
I used magpro2 (flashtec) clone and is ok...
furburger
10th May, 2012, 12:36 PM
TOI/Duration is at BBAD2
javiercj
10th May, 2012, 06:51 PM
I used magpro2 (flashtec) clone and is ok...
but
it read/write? magpro st10 flash???
bellautos
10th May, 2012, 08:36 PM
If you disable the EGR by flash you will need to also disable the Mil light for it. Xprog does this ecu very well also.
Pete
javiercj
10th May, 2012, 08:43 PM
If you disable the EGR by flash you will need to also disable the Mil light for it. Xprog does this ecu very well also.
Pete
You can explain also how to cancel the egr in cartography, to locate the egr map?
And as you can read this ecu, with xprog-m
that connections make to read and to write the flash and eeprom
hope your help and the form of connection
thanks
kevfield
10th May, 2012, 09:02 PM
And as you can read this ecu, with xprog-m
that connections make to read and to write the flash and eeprom
hope your help and the form of connection
thanks[/QUOTE]
If you have xprog you can find this info out easy !
furburger
10th May, 2012, 09:52 PM
Is there an e2p in this ecu?
javiercj
10th May, 2012, 09:56 PM
And as you can read this ecu, with xprog-m
that connections make to read and to write the flash and eeprom
hope your help and the form of connection
thanks
If you have xprog you can find this info out easy ![/QUOTE]
because in the file info of xprog-m is how to make the connection.
but this connection make it in the micro does in that leg to make the connection and that information does not come in the st10 micro flash
help please to identify correct connections of the micro with the connection of the xprog-m
kevfield
10th May, 2012, 10:22 PM
Pins for st10
Thanks kev
javiercj
10th May, 2012, 10:28 PM
Pins for st10
Thanks kev
ok
yes in the the case st10276 it is appear the pins conexion
but in the case st10280 it is no appear the pins conecxion, for the unit delphi
kevfield
10th May, 2012, 10:33 PM
make photo of pcb ecu the the
Thanks kev
furburger
10th May, 2012, 10:48 PM
I'm reading in boot mode with BS.. only seeing 832kb file ., you can read more bytes or another memory with x-prog m?
javiercj
10th May, 2012, 10:49 PM
make photo of pcb ecu the the
Thanks kev
tomorrow
to do the photo pf pcb ecu
thanks
javiercj
12th May, 2012, 11:18 AM
tomorrow
to do the photo pf pcb ecu
thanks
here you have the picturess the engine unit with micro st10f280 (flash).
i need to read/write eeprom/flash of these micro stflash
please how do i do the conextions with programmer xprog-m?
i wait for your replay
thnaks
Dyrygent
15th February, 2018, 01:21 PM
507120
pinout connection dcu102 read ktag507122
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.