PDA

View Full Version : Navigation PIN From FIS



Min2xx
21st February, 2012, 05:32 PM
Pleas pin code from this dump. Can't read all dump :(
Thanks in advance :)

iepower
21st February, 2012, 05:47 PM
Post the .bin file not image

prusony
21st February, 2012, 06:15 PM
Pleas pin code from this dump. Can't read all dump :(
Thanks in advance :)

Enter -= 1133 =- BR

TICA
25th March, 2012, 07:19 PM
Holla , ayuda por favor . no puedo leer el fis con el x-prog . alguien que me diga las conexiones . gracias .

prusony
25th March, 2012, 07:39 PM
1 de escritura en Ingl?s
2 Utilice la opci?n "Search this Forum"

TICA
15th April, 2012, 04:47 PM
Holla, thanks for replying Prusony. Is that I've searched around the forum and have tried all ways and I do not read it. I'm using the x-prog. Help please. A greeting.

TICA
27th May, 2012, 01:27 PM
Holla Prusony, can you give me pin this dump? . Thank you.

prusony
27th May, 2012, 04:00 PM
Holla Prusony, can you give me pin this dump? . Thank you.
Sorry, can not help, because dump does not contain code-lines.
Read again. Lines 20 40 & 60 your dump 00000000000000.....

TICA
27th May, 2012, 09:20 PM
Hello Prusony , thanks for replying so soon. I do not get to read the fiscal as scl and sda via 24c32 and puts it in this forum. I searched the chip that is the ST95320 and I unsoldered and I read directly with the x-prog .

Min2xx
27th May, 2012, 09:55 PM
Hello Prusony , thanks for replying so soon. I do not get to read the fiscal as scl and sda via 24c32 and puts it in this forum. I searched the chip that is the ST95320 and I unsoldered and I read directly with the x-prog .
You need read FIS module eprom as 24C32, not external eprom !!! PIN is in FIS module.

TICA
29th May, 2012, 03:01 PM
Thanks Min2xx is that I have the x-prog and I can not read the fis. Or do I connect well or do not understand why, so I removed the chip and I've tried so. A greeting.

Min2xx
29th May, 2012, 10:08 PM
Thanks Min2xx is that I have the x-prog and I can not read the fis. Or do I connect well or do not understand why, so I removed the chip and I've tried so. A greeting.
You can't remove FIS, it is big module.

You must find way to to read by testing many ( or all possible ) read modes by switching devices from AT to ST, I don't remember what is right.

gojko
30th May, 2012, 10:45 AM
This may help you

TICA
2nd June, 2012, 12:40 PM
Thank you all. I'll try more when I have time. Regards.

Min2xx
1st August, 2012, 10:39 AM
Please PIN BNO881 from 24C32 Dump

prusony
1st August, 2012, 11:31 AM
Please PIN BNO881 from 24C32 Dump

-= 1943 =- BR

key
6th November, 2012, 03:25 PM
hello, can you calculate code for this dump?
Radio navigation BLAUPUNKT
7612 001 297
1J0035191
VWZ1Z1X7825546
FIS 24C32

Thanks.

prusony
6th November, 2012, 03:45 PM
-= 1791 =- BR

girolamodisidisi
13th December, 2012, 01:54 PM
Hi!
Sorry for this replay...but i need help!
I need pin code from fis dump of ..7 612 001 014 ,4b0 035 192k,
014auz1z1b**** audi navi plus
Thanks in advance!

prusony
13th December, 2012, 05:45 PM
Hi!
Sorry for this replay...but i need help!
I need pin code from fis dump of ..7 612 001 014 ,4b0 035 192k,
014auz1z1b**** audi navi plus
Thanks in advance!

Wrong dump, found CODE impossible, read it again as 24C16 or 24C32 or 24C64.

Taras+
13th December, 2012, 07:52 PM
dump bad code is visible