golf 5 dash vdo 24lc32

[d.zio]

hello to all mates.....i have a golf 5 with 192880km for km calibration....inside has 24lc32......i read the value ok with licznic,i do the calculation,write back to eeprom put the dash back to car and ihave 192000km now......my dump is....need 91300 km.thanks in advance

[andersonmaxi]

hello try this
goog luk

[PremierD]

hello to all mates.....i have a golf 5 with 192880km for km calibration....inside has 24lc32......i read the value ok with licznic,i do the calculation,write back to eeprom put the dash back to car and ihave 192000km now......my dump is....need 91300 km.thanks in advance

Needs the key from Micronas mate ... sorry

[d.zio]

i do the connection with xprom 5.......but it cant bypass the security?????it says check connections.....i check three times the connections but nothing....all ok.......ihave and the adapter that requires and checked and the modification that it needs and is ok//////what else must it be???????

[roth18]

Use search, this was discussed b4.

http://www.digital-kaos.co.uk/forums/f174/x-prog-m-golf-v-micronas-problem-93864/index2.html

[d.zio]

can it be from authorization?

[roth18]

can it be from authorization?

I do not think so but check if you got them, Update Auth tab.

[d.zio]

if the micronas is killed must i read it?

[d.zio]

i cant find solution to this........... i suspect the wiring...of my xprogm 5 clone!!!!can anyone post a foto of a working tsted cable for x progm???thanks in advance

[d.zio]

is this tool good for these dashes

[smokey08]

is this tool good for these dashes

No. You need the blue one.

http://www.ecutool.com/upload/201171105648422.jpg

[d.zio]

thanks for the replies......about xprog m why i have these problems/?

[d.zio]

i think thay the xprog m and the micronas is a legend