Clio 2 key+uch+ecu+clip=grrrrr

[metercar]

Hello DK friends

immo problem on Clio 2 2004 1.6 16v

ecu sirius 32 immo off with bad dump and pin 58 destroy

uch original destroy with wather

keys lost....

in this moment:

ecu repaired and reset immo

new used uch siemens 93c66 with pin

new keys

on clip v114 i need "after sales code" with code key

on t300 all cycle complete and not make a new key

help me! please! thanks in advance!

[elephantul]

clip is not good for this, are you sure pin is good ? post dump from uch

[alfabit]

Hello DK friends

immo problem on Clio 2 2004 1.6 16v

ecu sirius 32 immo off with bad dump and pin 58 destroy

uch original destroy with wather

keys lost....

in this moment:

ecu repaired and reset immo

new used uch siemens 93c66 with pin

new keys

on clip v114 i need "after sales code" with code key

on t300 all cycle complete and not make a new key

help me! please! thanks in advance!

So, one step at a time.
Ecu repaired, reset, immo off or whatever you did it so engine start.
New used UCH you must virgin it ( by DDT not CAN-Clip ), you will input the code APV given by reprogramming virgin UCH with new keys, so central locking will work, engine already working, money in the pocket. That`s all, job done, 1 hour max including cofee break.
And by the way, with Clip v114 as you said you could not input APV, is taken only by net from a server.
But the car can be all electrics as new, ecu must be virgin and will learn the code from the new UCH and keys, but can be left as described above. I would yet make ecu virgin for learning code from new UCH+keys.

[metercar]

are not sure the pin

calculated with codekey

FF14FF728111

[imcumen]

your dump is corrupted

[metercar]

are you sure? this dump is ok in all functions on uch i need pin

[prusony]

TRY PIN -= D7 11 0E 99 72 14 =-

[alfabit]

are you sure? this dump is ok in all functions on uch i need pin

Keys are new ? Ever programmed ? Or the keys are pairing with the sh UCH ?
New keys can be programmed either PIN you want ( given by the virginised UCH ) Must virgin sh UCH, as i already told you.
Apply procedure " apprentisage usine " for new UCH and new keys. This is well explained in DDT.

[ninja123]

why not just use second hand UCH and key from same car, immo off ecu....JOB DONE.

ninja

[alfabit]

why not just use second hand UCH and key from same car, immo off ecu....JOB DONE.

ninja

I`ve never understood if he has keys pairing that sh UCH or he reffers to NEW keys ?
I explained him above in post #3 it is an hour job, but he`s keeping his way...
If he knows best, why asking ?
:giveup: