Mercedes W211 start problem

[keturi]

Hello everybody,
Came Merecdes Benz 2003 E class W211 320CDI full dead, no key. Have made key, put in ignition lock, dashboard shows "Computing data, please wait". Have wait half a day, no result, still the same warning. Star diagnosis not shows EZS or ESL faults, can see key number, remote works.
Any solutions
Thank's

[mercis]

and what see you on engine ecu DAS? (fahrberechtigung)

[keturi]

No communication with ecu. Tried put jumper to engine control relay, the same.

[keturi]

No communication with ecu. Tried put jumper to engine control relay, the same.
Maybe were wrong calculated keys?

[kaToo]

put key in ezs and pull it out for 20 - 30 times
don't waint just punt in and out ...
it work every time for me

[keturi]

Thanks mate, have tried, no result.
I found, that EZS VIN code is different, than real car VIN, but inside ecu 95160 VIN the same in EZS.
Some ideas...

[keturi]

ECU inside

[vanos batam]

[QUOTE=keturi;1521788]ECU inside[/QUOTE


ezs dump and keys is corect

[keturi]

What could be more wrong with this car?... No ideas...
Have checked ESL dump, everything ok, EZS, keys, engine OK. Remote working, have tried put/remove key 50 times, but still on the dash "Computing data, Please wait"
Help, please
Thank's

[keturi]

Still need help :)

[Bazil_mb]

Maybe you have a replacement key and you need more time to delete data and program the new key

[MarkPRP]

what equipment are you using?

you in UK?

[vuno01]

did someone messed around with the ezs?
why is it showing different vin number?

[makura]

did someone messed around with the ezs?
why is it showing different vin number?Does the vin number affect the starting of the car?

[keturi]

what equipment are you using?

you in UK?
Yes, I am in London. I using MB Star for diagnosis, Rosfar for reading/writing EZS and MB key programmer for NEC inside key, Omega for ESL HC05E6.

[leandroks]

Hi m8 i ve seen the same problem before and ended up to be the esl, that had jammed the gear that releases the steering lock, open it and have a look.. CHeers

[vuno01]

usually these CAN cars compare vin numbers and every other diferent codes in order to autorize a start

[keturi]

Hi m8 i ve seen the same problem before and ended up to be the esl, that had jammed the gear that releases the steering lock, open it and have a look.. CHeers
I already did that. ESL gear working good, because when I push the key, ESL moving from unlock position to lock, but never back. Have tried put FF FF (except last line) to HC05E6, situation the same, no faults, no ignition.