2010 ford focus airbag

[sensadeg]

hi, can anyone clear 2010 ford focus airbag module, # 9s43 14b321 CC / 0285 010 719. EEPROM 95320. THANKS

[srscrash]

I would like to help, you can test this dump
Best regards
Please tell me if it was ok
the pass will be sent by pm

[morfej]

If you don't want to loose you time testing...

here a tested solution.

Br

[srscrash]

If you don't want to loose you time testing...

here a tested solution.

Br

"sensadeg" You can trust this distinguished member "morfej" never fails, is a real PRO in this area, my solution is not tested, sorry just tried to help, I think the forum should be for this reason, help those seeking help
BR,srscrash

[sensadeg]

thanks guys i really do appriciate your help , when ever you need help just PM ill try to help, i try to post new file that i get so you guys can use thanks.

ill let you guys about the file.

[sensadeg]

hey still have a code on the module. occupant classification system fault . any insight?

[morfej]

Is the OCS like in 2009 focus with part number 8S43-14B422-AF ... as in that case you might need to clear the OCS too (if you don't have diagnostic, read the eeprom of OCS).

br

[AMLGAR]

you most do OCS pin point test.. if you clear codes wont clear... I JST MADE ONE BUT I dont know after a day light turned on with code C1414 AAND B1342,in RCM, OCM OK. I MADE SOME 2008 AND 2009. NO PROBLEM...

[goga969]

hey still have a code on the module. occupant classification system fault . any insight?
Maybe need calibrate OCM..for calibration you need Ford IDS

[sensadeg]

hey so i got the ocsm module out from the seat . i have to clear the module. i dont have a tool to clear the codes from the module. do you know how to pin out the eeprom from the other side of the board cause i dont think i can pull out the board with out soldering off the pins. any clue?

[Dane-Elec]

hey so i got the ocsm module out from the seat . i have to clear the module. i dont have a tool to clear the codes from the module. do you know how to pin out the eeprom from the other side of the board cause i dont think i can pull out the board with out soldering off the pins. any clue?
That....i want see MR SRSCRASH help you...:roflmao:

[srscrash]

That....i want see MR SRSCRASH help you...:roflmao:

The wise guy, knows all .... is you. :sheep:

[Dane-Elec]

Well... now you can prove you know more than me..so, show him how to read....:help:

[srscrash]

Jorge, I know that your mentality is very small, and contrary to what you have claimed, I do not come to this forum to prove anything, nor to measure forces.
I just try to help.
Please from now speak in your name and save me from these your tiny and petty comments
Have a good job

BR,srscrash

[Dane-Elec]

I belive you, where is the CAT.....?

[sensadeg]

tension. we can resolve my isssue and continue the arguing.

[sensadeg]

what kind of tool can i get to clear the codes off the ocs module?

[matthew555cars]

autoenginuity or ids ford

[AMLGAR]

USE THIS FILE..POST RESULTS...:rolleyes:

[sensadeg]

almgar your files you dont clear enough i figured it out it very simular to morfej clear. i also, had to clear the crash data in the seat ocs. bought a ford obd. very cheap tool and good. light gone thanks for your help guys. :thrasher: