Fiat Immo How to read without boot

[roman_auto]

Hi all
there is any way to read fiat punto 59f hw002 with galletto with out opening the ecu and ground the boot ?

Thanks all

[baltazar3]

HW<100 no way with galletto in boot mode.You need IAW decoder.

[roman_auto]

HW<100 no way with galletto in boot mode

59f m2/m3 above hw100 i can do it without boot mode ?

[baltazar3]

Yes but not with galletto.

[roman_auto]

Yes but not with galletto.

ok so with what hardware i can do it without boot mode ?

[baltazar3]

MPPS V12 or new Galletto or IAW decoder

[d.zio]

hello...i have also one iaw59fm3 61600.376.09
hw603/4012-0mz


can i do it with galleto 1260,kwp 2000 plus or mpps??????

what is the procedure please???
thanks in advance

[baltazar3]

hello...i have also one iaw59fm3 61600.376.09
hw603/4012-0mz


can i do it with galleto 1260,kwp 2000 plus or mpps??????

what is the procedure please???
thanks in advance
Use MPPS V12 and just rewrite ECU :D

[d.zio]

can anyone tell me procedure with galleto on car please???

[baltazar3]

If You have Galletto 1250 or 1260 You can not read this ECU on car.Only can read HW>100 on bench with boot mode.
Look this

[d.zio]

so to do this procedure with kwp2000 interface,on bench on boot mode wwith 59f-5af boot soft

[baltazar3]

Or simply get ECU in boot mode and read with galletto 1260 or 1250.

[baltazar3]

And write this

[d.zio]

solved.......thanks to all

[roman_auto]

I have now 59F m2 hw002 and the ecu dont have the pin of the boot mode , i opened some before and i saw the boot pin and this ecu dont so any jelp what now how to read this ecu ?

Thanks

[baltazar3]

Its right...HW<100 does not have boot pin.Only IAW Decoder read/decode him.