Zed-Bull clone - Second Life

[3abas27]

I would like to download this software. Is it possible? Could you help me?
Thank you very much.
freind i got progrm EFfi
when open program and see two modules 14 and 98 normally are the same
the first is logic because it create the image file so the car will run the second not create the image file so the car will not run but in progrm you see ready to start can you correct freind

[3abas27]

freind i got progrm EFfi
when open program and see two modules 14 and 98 normally are the same
the first is logic because it create the image file so the car will run the second not create the image file so the car will not run but in progrm you see ready to start can you correct freind
another point plz freind siera
for module 14 vit works on id 48 for module 98 it works on 7946 ot pcf 7936
the one which work on id 48 it raedy to start with image created the one which work on 7946 or 7636 it only preprogrmmed tronspoder and necessary an diagnostic for for entring code to immo

[sierra]

Hi all.
Not great advice how you can make comments to your dump.

Run the WinHex

http://imageshack.us/a/img15/8678/90328172.png

http://imageshack.us/a/img5/5678/72751201.png

http://imageshack.us/a/img411/1197/11847271.png

http://imageshack.us/a/img23/3848/86081164.png

The result is something like this:

http://imageshack.us/a/img42/7477/63939726.png

I always do, it may be useful to someone else :)

[paul_12345]

another point plz freind siera
for module 14 vit works on id 48 for module 98 it works on 7946 ot pcf 7936
the one which work on id 48 it raedy to start with image created the one which work on 7946 or 7636 it only preprogrmmed tronspoder and necessary an diagnostic for for entring code to immo

yes id46 is only precoded no file created..

theres people on here who know where to write the transponder info into the file, and I'm sure there plently of people with a tango etc who could easily find out by letting tango create the file and comparing.

I'm sure if they post the info to sierra he will add it.

[sierra]

yes id46 is only precoded no file created..

theres people on here who know where to write the transponder info into the file, and I'm sure there plently of people with a tango etc who could easily find out by letting tango create the file and comparing.

I'm sure if they post the info to sierra he will add it.

You're talking about 98 Module?
Normally everything works and saves the dump :)
I have not had the desired dump, but I checked on the other.

EFfI 98 - YouTube

Do not be afraid to click the button to check the works or not.
I did so that we could unlock the transponders that you yourself wrote.

[djfelixrs]

Sierra Friend!
Sent you an email address douglasfbrock@gmail.com to know what I need to send to continue contributing to the software. Accompany its software since the first version and I wonder if I have the right to receive and keep using it. If possible send me at least one answer. grateful

[sierra]

Sierra Friend!
Sent you an email address douglasfbrock@gmail.com to know what I need to send to continue contributing to the software. Accompany its software since the first version and I wonder if I have the right to receive and keep using it. If possible send me at least one answer. grateful

Only one response.
Do not ask can you contribute to the project or not.
Simply, without question make a contribution :)

PS: At the moment I think how to make so that those who could not contribute to the project, but also wants to get the program ;)

[oep]

make donation? lol ? :D

[micromax]

sierra, i too can pay for your work.

best regards

[sierra]

make donation? lol ? :D
Yes. Who wants to, can help money :)
The amount is not large, only in my incidentals.


sierra, i too can pay for your work.

best regards

A week later, when the transfer online updates to another server can write to me via e-mail.

[paul_12345]

@sierra (http://www.digital-kaos.co.uk/forums/members/119881-sierra/) why not post the code from a few modules showing the interface so those who can code could write the code for you to check/mod and add could save you a lot of time.

[3abas27]

@sierra (http://www.digital-kaos.co.uk/forums/members/119881-sierra/) why not post the code from a few modules showing the interface so those who can code could write the code for you to check/mod and add could save you a lot of time.
today my clone zedbull sof frimwre 5.00 with software 5.08 on EFfi for cleaning pcf 7935 work no problem but i test another used trospoder cant make clean

[verica]

try not to clean go to image generator try to prepare transporder works for me ok

[PierreTheron]

I think you need to have the original file for transponder to clear it for use in another car ..That is that you must run it through the original file you made it from .. EWS editor can do this on some transponders i found ..Then also sometimes the transponder is locked . That is without knowing where it happened bfrom ................///////////////

[frtes]

password please

[sierra]

password please
ASJjjhjhj-123gggh-kjk445

[3abas27]

ASJjjhjhj-123gggh-kjk445
thanks very well to siera and all members dk
for video post by siera for 7935 clear
we sawass word 5C 28 3F 0E 116E 28
I follow all steps on video i generate 42 from virgin 7935 i make pass all fine
i make the same for opel i generate 400 from 7935 i did the same pass word post by siera in video not work
my question how to get password for cleraing all kinds 7935

[djfelixrs]

Okay sierra!
Sent you here on a material panels fiat and got no response has been achieved or not use. How will I send you without even knowing what you need exactly? Could have at least given me an answer. If you need to send your okay as there's winhex procedure, is so to speak!!



Only one response.
Do not ask can you contribute to the project or not.
Simply, without question make a contribution :)

PS: At the moment I think how to make so that those who could not contribute to the project, but also wants to get the program ;)

[3abas27]

thanks very well to siera and all members dk
for video post by siera for 7935 clear
we sawass word 5C 28 3F 0E 116E 28
I follow all steps on video i generate 42 from virgin 7935 i make pass all fine
i make the same for opel i generate 400 from 7935 i did the same pass word post by siera in video not work
my question how to get password for cleraing all kinds 7935
sorry mistake i generate 40 for opel from 7935 not 400 sorry

[williamamaro]

Sierra
I tried to program a Punto year 2008 with 95160 SSOP and has not Serto, it calculates the password Serto, plus it puts the id of the transponder in the wrong place

I sent the files to see you
programmed with SBB and copied the file
MsN: reset_decode@hotmail.com

Sierra,
Password Manderei by private message

[gepakg]

:star:

regards Gepa


ASJjjhjhj-123gggh-kjk445

[sierra]

ASJjjhjhj-123gggh-kjk445
It was a joke :)
I do not know what password you requested, this gave the password :)



my question how to get password for cleraing all kinds 7935

If you do not know how to get the password from the dump, it does not happen.


Sierra
I tried to program a Punto year 2008 with 95160 SSOP and has not Serto, it calculates the password Serto, plus it puts the id of the transponder in the wrong place

I sent the files to see you
programmed with SBB and copied the file
MsN: reset_decode@hotmail.com

Sierra,
Password Manderei by private message

I did not get the password.

[sierra]

Thank you friends for the help!!!
But I will not do this program, not interesting :)

[sierra]

williamamaro You sent me a draft written in Delphi?

[Elric]

williamamaro ***1101;***1090;***1086; ***1074;***1099; ***1084;***1085;***1077; ***1087;***1088;***1080;***1089;***1099;***1083;** *1072;***1083;***1080; ***1087;***1088;***1086;***1077;***1082;***1090; ***1085;***1072;***1087;***1080;***1089;***1072;** *1085;***1085;***1099;***1081; ***1085;***1072; Dalphi?

fail ya fud

[williamamaro]

williamamaro You sent me a draft written in Delphi?


and do not file for delphi

are file punto
1 File, original
Effi and the other soft, so they do not run

I made another and with SBB that gave Alright

[ajman5252]

heyy
so sorry for being an idiot here!!

I am a newbie auto locksmith and has a zed-bull clone, reading thru all posts of all 36 pages in this thread, i came to knowthat a Genius (Sierra)has made a program that is almost equal to zedbull original.

Can anyone pls take trouble by enlightening me, what i am supposed to do to contribute to this program??
I downloaded EfFi-HII file, from this thread, is this supposed to be a trial or demo version of what Sierra has made??

Should i send the Dump to Sierra of the cars i work with??

Is this how will i get the full version of this new software

P.S: Sierra, please dont take trouble answering my question, as it is sure that you re busy in developing the program. I would appreciate if other members can help me out!!

[Yura123]

I really wanted you to have this program, someone could share

[dam495]

sierra do you have any news about fiat file i sent two for you mask 1jhk, one was megamos id48 pre codec and another was id13 , and when you will post the paypal accont on line ,

[Jeanhdo]

I really liked the software, has helped me a lot. But already ordered a new version by email, by mp and was not answered.
I've been asking for this post again, @ Sierra, can send me the new software?
Jeanhdo@hotmail.com
Thanks in advanced.

[3abas27]

I really liked the software, has helped me a lot. But already ordered a new version by email, by mp and was not answered.
I've been asking for this post again, @ Sierra, can send me the new software?
Jeanhdo@hotmail.com
Thanks in advanced.
all who receive this softwrae should pay for this kind man normaly zedbul original cost money to to encourage siera to develop more this soft than zedbul me is ready to pay for you strong siera

[Vatan]

hi..
I have solution for make new bsi fiat tipe 5, id46 new gran siena, palio 2011>>
73'
py2dvs

send e.mail for>>

[Vatan]

Sierra
I'm amauter radio and I work with immobilizer car, MCU.
Is possible you send me the new software for zed bull(clone). please.
e.mail.
73'
py2dvs

[Yura123]

all who receive this softwrae should pay for this kind man normaly zedbul original cost money to to encourage siera to develop more this soft than zedbul me is ready to pay for you strong siera

I am interested ...?

[hamadatga]

:giveup:iam hamada tga ihave zed bull v(701)any ane need it tell me iworking with program

[pkeeney]

Can I please have a copy of the new EFFI software
Thanks!!!!!

[cyrixcard]

Can I have new copy of EFFI. Mine is destroyed by virus. Also any way to contribute by webmoney, paypal, etc. Most of the locksmiths here cannot afford TMpro, Original Zedbull, Tango. I have original carprog, original AVdi with many software and it is tight budget buying Tango or Tmpro . I have clone SKT Tool 3.9 and I know EFFI is product with future. To me, with good advert and small cost, sierra can sell to more locksmiths than any other product. Imagine 500,000 locksmiths buying his software at small price. That will be millions of dollars. Pls let me know how to contribute money. Suggestion. U can add software activation key, so pple can not resell software.

[elchip]

Success programmed 2 key to DUMP which was corrupted on Citroen Jumper 2004 immo box delphi gray.

Regard's

[automan]

sierra stopped developing Effi

[sierra]

Imagine 500,000 locksmiths buying his software at small price. That will be millions of dollars.
:) How beautifully written, I immediately eyes glistened :)
But you must understand, when there is a free program all need. And when asked to pay is already a program are no longer needed :)

I am no longer doing the program, it is not worth even having had a drink coffee at night :)

[chrismoore02]

Sierra your software is worth more than that we all know this. You need to develop a way for us to donate to get say an install key. :D

[nicamarcos]

Success programmed 2 key to DUMP which was corrupted on Citroen Jumper 2004 immo box delphi gray.

Regard's
hey!, you are alive?

[Jeanhdo]

In hindsight, I think it was better the project is finished. In my country there are various opportunist making money from the labor of others.
Look how sales are ....
Software Zed Bull - MercadoLivre Brasil (http://lista.mercadolivre.com.br/software-zed-bull_DisplayType_G)

[Vatan]

New BSI Fiat 2012 - ID46


1 Key - Crypto Low - Address: 06B0h Data: 8F 00 8D 01
2 Key - Crypto Low - Address: 06F0h Data: 8F 00 8D 01
1 Key - Crypto High - Address: 06B7h Data: 93 01
2 Key - Crypto High - Address: 06FFh Data: 93 01

[3abas27]

New BSI Fiat 2012 - ID46


1 Key - Crypto Low - Address: 06B0h Data: 8F 00 8D 01
2 Key - Crypto Low - Address: 06F0h Data: 8F 00 8D 01
1 Key - Crypto High - Address: 06B7h Data: 93 01
2 Key - Crypto High - Address: 06FFh Data: 93 01

the strong siera develop the soft to be full work with clone hardware zedbull for free to all others sell the project for winning money without any effort
hope that siera continu developping this soft but not for free
all here in dk dowload effi soft for wining money him also should be payed for this great job

[Vatan]

yes... all the job need the payment..
this is correct.
Sierra you is 100% correct.
Congratulations..!!!

[Vatan]

Originally Posted by Vatan
New BSI Fiat 2012 - ID46

'''
1 Key - Crypto Low - Address: 06B0h
2 Key - Crypto Low - Address: 06F0h
1 Key - Crypto High - Address: 06B7h
2 Key - Crypto High - Address: 06FFh ""

Sorry...
The data is only for original dump.

[sierra]

In hindsight, I think it was better the project is finished. In my country there are various opportunist making money from the labor of others.
Look how sales are ....
Software Zed Bull - MercadoLivre Brasil (http://lista.mercadolivre.com.br/software-zed-bull_DisplayType_G)

Nimble guys :)
But not very smart :)
I never put out the full version of the program, they can expect a little surprise :)

[luis12]

Hi Sierra, I recently buy a clone but the soft are in Turk and are incomplete, I readed you are the most capable to make work with this piece if plastic, need help to make it funtionally, can your soft EFfl work with I downloaded but dont works.

[ajman5252]

sorry for ignorance.... can this software copy 4d and 46 to Tpx2 or Tp4 without taking any dump from the vehicle???

[3abas27]

sorry for ignorance.... can this software copy 4d and 46 to Tpx2 or Tp4 without taking any dump from the vehicle???
whats to do with dump from vehicule if you want to copy tronsponders it is a function read and write red 4d and write to tpx2 for 46 effi not have this function hope to be add by siera

[dam495]

sierra how about the paypal account when are you going to release , we want to help you , for most friends here , paypal is the only way for send bucks, and how about the effi project are there any news? how about that eproms who i sent to you, are there any news?

[ajman5252]

sierra how about the paypal account when are you going to release , we want to help you , for most friends here , paypal is the only way for send bucks, and how about the effi project are there any news? how about that eproms who i sent to you, are there any news?

Yes sierra, i totally agree with dam495. Please put paypal as one of your payment option...a lot more convenient!!

[sierra]

I already wrote that through PayPal can not accept money. Go to their website and see that for some countries (including Kazakhstan) cannot take the money to the account.

I have no such purpose that would sell more software :)
Some think that having bought my programme, I must whole nights to write for them, updates :)

I've always said that doing the program in his spare time. And now the time is very little.

[Jeanhdo]

I already wrote that through PayPal can not accept money. Go to their website and see that for some countries (including Kazakhstan) cannot take the money to the account.

I have no such purpose that would sell more software :)
Some think that having bought my programme, I must whole nights to write for them, updates :)

I've always said that doing the program in his spare time. And now the time is very little.
Now I understand its purpose, if you charge money for the software will be under pressure to work harder and harder every day ....
Making the program because nobody wants to help can charge you anything. is a kind of hobby.
I admire his work and his knowledge, but as I showed in a previous post, it is very complicated, losing nights of sleep doing something to help others and see their work being sold by mercenaries.

[cyrixcard]

Crack of Abritus did not discourage improvement on AVDI line. Crack of Gambit only made them develop Tango. Sale of Effi by someone in brazil should not discourage. It show the product has value and that is why it can be bought. If product is valuable people pay to have it and if they pay original owner, they get updates. Why will EFFI be successful? Because it is supported on the most popular clone product, which is zedbull. China produce zedbull mini and this is the highest selling key reader and writer in the world. It is cheap for $160 to sell the hardware. So imagine locksmiths buying $100 software for EFFI and over 500,000 people buying it. Original zedbull will close down because everybody will buy the clone zedbull and original EFFI software. People prefer to buy clone not because not like original but because original is too way priced out for independent garage and locksmiths doing few cars per day/week. Some products are just for the big companies. So, how many locksmiths can buy full version AVDI commander, Tango, Tmpro, Carprog? Some of us take loan and buy expensive software and when no business it hurt. So, we opt for cheaper software like EFFI. So, the idea to develop effi is golden. Never underestimate marketing of this great software. You can get reseller in USA/Western Europe. He collect paypal, and you activate and you share revenue or you can ask for money by other means. EFFI is good software idea to give great power to clone tool. THIS IS THE FIRST IDEA IN THE WORLD OF LOCKSMITH to bring power at low price. Dont say NO till you try. IF AVDI, Tango, Tmpro say too expensive, people cannot buy then they would not have developed product. But AVDI has over 10,000 customers. Please verify this. EFFI will have over 500,000 customers. Just get resellers. Many things start with public contribution. Now see REDHAT linux, see how big ANDROID is now. It is the biggest change in the world of smartphones. It start with idea. EFFI will be the biggest revolution in the locksmith world to give power to many small locksmiths without cost limitation of expensive tools. This is for sure. Many other locksmiths here no it. Some locksmiths in this forum are very very selfish. They do not want other people in same country to have knowlege. Every software start with basic version which is functional free demo, so people can try it and see it is very good. Then, the full version which people buy cos they know product is good. Let the man selling in brazil make product popular, so u just include your contact information so when locksmith get this software, they contact you. Everybody needs effi. I need it. I can pay for it.

[elephantul]

I already wrote that through PayPal can not accept money. Go to their website and see that for some countries (including Kazakhstan) cannot take the money to the account.

take wife,kids,pig and dog and move in England

[automan]

licence for fiat ecu scan cost 50 euro.still there is cracked version but also i bielive many original copies sold.if sierra could sell 5000 licences for 50 euro would be good money.500000 copies sold i think is out of question.

[3abas27]

licence for fiat ecu scan cost 50 euro.still there is cracked version but also i bielive many original copies sold.if sierra could sell 5000 licences for 50 euro would be good money.500000 copies sold i think is out of question.
yes agree with you freind 100% , i payed 50 euro for fiat ecu scan than working with cracked one every 2 months news and updates and support

[Jeanhdo]

Crack of Abritus did not discourage improvement on AVDI line. Crack of Gambit only made them develop Tango. Sale of Effi by someone in brazil should not discourage. It show the product has value and that is why it can be bought. If product is valuable people pay to have it and if they pay original owner, they get updates. Why will EFFI be successful? Because it is supported on the most popular clone product, which is zedbull. China produce zedbull mini and this is the highest selling key reader and writer in the world. It is cheap for $160 to sell the hardware. So imagine locksmiths buying $100 software for EFFI and over 500,000 people buying it. Original zedbull will close down because everybody will buy the clone zedbull and original EFFI software. People prefer to buy clone not because not like original but because original is too way priced out for independent garage and locksmiths doing few cars per day/week. Some products are just for the big companies. So, how many locksmiths can buy full version AVDI commander, Tango, Tmpro, Carprog? Some of us take loan and buy expensive software and when no business it hurt. So, we opt for cheaper software like EFFI. So, the idea to develop effi is golden. Never underestimate marketing of this great software. You can get reseller in USA/Western Europe. He collect paypal, and you activate and you share revenue or you can ask for money by other means. EFFI is good software idea to give great power to clone tool. THIS IS THE FIRST IDEA IN THE WORLD OF LOCKSMITH to bring power at low price. Dont say NO till you try. IF AVDI, Tango, Tmpro say too expensive, people cannot buy then they would not have developed product. But AVDI has over 10,000 customers. Please verify this. EFFI will have over 500,000 customers. Just get resellers. Many things start with public contribution. Now see REDHAT linux, see how big ANDROID is now. It is the biggest change in the world of smartphones. It start with idea. EFFI will be the biggest revolution in the locksmith world to give power to many small locksmiths without cost limitation of expensive tools. This is for sure. Many other locksmiths here no it. Some locksmiths in this forum are very very selfish. They do not want other people in same country to have knowlege. Every software start with basic version which is functional free demo, so people can try it and see it is very good. Then, the full version which people buy cos they know product is good. Let the man selling in brazil make product popular, so u just include your contact information so when locksmith get this software, they contact you. Everybody needs effi. I need it. I can pay for it.
You're forgetting one small detail. EEFI is a software madefrom the original software, improved, but with the base of the original software.
Ever thought that the program would be sold can bring legal problems to Mr. Sierra?
In china copy everything and nothing happens, that's the way they live and nobody controls it.
I think to be sold the way they're saying it would be the hardware and software created by Mr. Sierra, we can not think only on our side, we have to think on the side of Mr. Sierra, if he is sued or even arrested for piracy you'll pay a lawyer to get him out of jail?
As said here really admire the work and programming skills of Mr. Sierra, said until now in private message that he worked for Istanbul zed bull would be one of the best equipment on the market.
What he is doing is a hoby, from the moment that it becomes a trade involving money can take other proportions.
This is my opnion, if you have another opnion'm here to listen.
Regards
Jean

[iozo]

successfully made chip from dump for opel meriva 2004 ID 40 , mcu tms370c702

[luis12]

Sierra can you upload your soft and instructions to back life to my ZB?.

[3abas27]

Sierra can you upload your soft and instructions to back life to my ZB?.
in officiel site anahtar zed bull frimware hw is increase to 5.09 but clone one only 5.02
what add frimware hw 5.09 to soft zedbull?
CLONING 46?

[3abas27]

SORRY FRIMWARE IS INCREASE TO 5.29 NOT 5.09 MISTAKE

[3abas27]

MODULE 100 FOR EFFI 100% WORK TESTED TODAY
THANKS TO SIERA

[3abas27]

module 32 work also tested today thanks siera

[ajman5252]

Few Doubts....can anyone clear me out
1.Does EFHI has Transponder production \ ??
2. what about 4D Test+reset function like in original software
3. anyone think or tried 4d stand alone module will work with Zedbull clone??

[maligno]

i test module 1 (opel UN) no work, the soft generate id40 virgin, no ready for start, need program whit pincode.

[dam495]

i did the same modulo 1 opel 2, with motorola lt72a , car didn't start. sierra can you fix it?

[3abas27]

i did the same modulo 1 opel 2, with motorola lt72a , car didn't start. sierra can you fix it?

for module 2 already tested on zed bul clolne ver 5.08 perfect i dont think not work on effi soft

[zygzook]

too good for siiera too thin for evo

[sierra]

too good for siiera too thin for evo

And what these words mean? :)
You have written the same words in my email in Polish. I still do not understand, it's sarcasm?

[zygzook]

slowa slowami kupuje to

[zygzook]

how old are you and how did you do cars only pratyka makes perfect
Practice

[zygzook]

nie naruszam zasad forum szacunek

[jarro]

How can I get your sofftware Sierra, regards.

[yellowstilo]

nie naruszam zasad forum szacunek

this is an English forum so please speak English here....

[igorr]

I tray crafter effi did not change only one bit on new dump I will send you working new dump and effi new dump

[3abas27]

nie naruszam zasad forum szacunek
our freind siera develop a great soft to work with clone zedbul which cost 100 dollars we should help him to develop more his soft to encourage to pay to him when he find solution not to distrub him with translating from polish to english

[dam495]

yes , who is this guy / why is he speaking polish / i must say for him, if you want perfection, buy a original zed bull and don't waste you time here, our freind siera develop a great soft to work with clone zedbul which cost 100 dollars we should help him to develop more his soft to encourage to pay to him when he find solution not to distrub him with translating from polish to english

[pezao]

Please can Help New BSI type 5 thanks

[MAGHRIBI81]

I want the password pls

[ajman5252]

I want the password pls

Contact Sierra thru PM or email him

[zygzook]

It thanks for calling attention, you have reasons, but I am it AWARYJNE OTWIERANIE SAMOCHOD?W RZESZ?W, podkarpackie - Favore.pl (http://www.favore.pl/30797_awaryjne-otwieranie-samochodow-rzeszow-podkarpackie.html)

[hauwkee]

i just start reading this thread i m at page 20 whoa amazing job right here big respect to Sierra and all member
from what i understand it work the best with Zed bull 5.2 soft
any advice on which clone to get to get best result with EFfi soft

[ajman5252]

i just start reading this thread i m at page 20 whoa amazing job right here big respect to Sierra and all member
from what i understand it work the best with Zed bull 5.2 soft
any advice on which clone to get to get best result with EFfi soft

will it work on mini zedbull?

[3abas27]

Zedbull clone buddy!!!
ZED-Bull ZEDBULL V502 Transponder Clone Key Programmer (http://www.uobd2.com/wholesale/zed-bull-zedbull-transponder-clone-key-programmer-tool.html)

works only with this, i guess!!
no freind i had old zedbull v 5.00 with key and work perfect wth effi not necessary 5.02 also 5.00 work

[todos]

:bounce:Thanks to Sierra software works great with clono zed bull

[luis12]

We are fullythanked to Sierra, hope he develops his own brand and hardware, great things begins step by step.

[ajman5252]

will it do Renault consult 3??

[iozo]

Module 28 - alfa 156 1998 ID 44 work fine , car start

[dam495]

was just me, who had problem with opel 2 lt72a. opel 2 with tms370 worked , but opel 2 with L72a doens't worked . is it possible fix it , vw module 97, is okay. MODULE 69 YAMAHA IS WORKING?

[electrohicham]

was just me, who had problem with opel 2 lt72a. opel 2 with tms370 worked , but opel 2 with L72a doens't worked . is it possible fix it , vw module 97, is okay. MODULE 69 YAMAHA IS WORKING?

opel with motorola work ok tested use pcf 7935.

[todos]

hello sierra, I saw that hyundai atos year 2004 does not work with the controller (kefico) I am attaching the file to give it a look ...
(EFfi @, not there is this module for this machine)
:captain:

[Vatan]

For all..... check this.. please....

[neriuks007]

where do you get it? have more?

[Vatan]

I did a study on this Immo...
Now I need to find data from remote..

[ajman5252]

ford fusion dump

[sierra]

i found a small mistake... I read the dump of Ford Fusion 2004. i opened the dump in Effi in auto select mode, but it gives different ECU with 4c. I think it should be Visteon ECU with 4D 60
I then programmed it with help of a friend, who uses Tango to Tpx2, and it read as 4d60 in zed bull..
So sierra can u clear this bug? or did i do anything wrong?

You programmed transponder with tango and the transponder started the car?

[3abas27]

You programmed transponder with tango and the transponder started the car?
zedubll read tpx2 bad quality like 4d60 but when it is tpx2 from JMA it read it tpx2

[ajman5252]

You programmed transponder with tango and the transponder started the car?

yes it started the car.. i am so so sorry, it was not tpx2. it was 4d60 chip tht was used to program and start the car

[sierra]

My program determines this dump like the original ZED-Bull.
You can give a little more information?
Such ECU as in module 62? You have read the transponder which is recorded using the Tango?

[3abas27]

My program determines this dump like the original ZED-Bull.
You can give a little more information?
Such ECU as in module 62? You have read the transponder which is recorded using the Tango?
yes freind siera tango program ford transponder after on 4d60 not on tpx2 last year i had this problem on ford transit i use original tag key tool not start the car a frein made me transponder with tango th car start

[sierra]

yes freind siera tango program ford transponder after on 4d60 not on tpx2 last year i had this problem on ford transit i use original tag key tool not start the car a frein made me transponder with tango th car start

Do you still have this dump?

[3abas27]

Do you still have this dump?
yes freind i had both original and image

[sierra]

yes freind i had both original and image

You dump a different type than ajman5252
Your dump correctly defined in the program.
Such a dump that gave ajman5252 I have not found anywhere else.

[maligno]

Hello Sierra, it is ecu eec-VI by ford fiesta

[sierra]

Who has the dumps from the module 83? 4C

[HenrichSGU]

Hello Sierra, it is ecu eec-VI by ford fiesta

what manufacture year is this Fiesta ?

[mojomojo]

Sierra your software is worth more than that we all know this. You need to develop a way for us to donate to get say an install key. :D


BUMPPPPPPPPPPPPPP

[maligno]

what manufacture year is this Fiesta ?

2004 soutamerica

[tas_daz]

the zed bull can t read the mercedes key?like 210 or 211?i go to read and says no chip.what machine can read and write mercedes key?

[HenrichSGU]

2004 soutamerica

and this eeprom "st77012" what is this for eeprom type ?
(some like 24c04 ? )

[maligno]

and this eeprom "st77012" what is this for eeprom type ?
(some like 24c04 ? )

st77012: read as 25010
st77014: read as 95040

[3abas27]

st77012: read as 25010
st77014: read as 95040
which tool with it you add third key?

[badenaleks]

Info zedbull

[3abas27]

Info zedbull
MODULE 83 PERFECT WITH TPX2 START CAR THANKS TO SIERA

[sierra]

MODULE 83 PERFECT WITH TPX2 START CAR THANKS TO SIERA

Do you have a dump of the module 83?

[tawaf11]

thanks sierra with this soft good job

[dam495]

sierra do you have information about that dump fiat imobox gray. mask 1k59h, the way to pre codec transponder on this imo box , using zed bull, are there any friend here able to pre codec this imobox using zed bull, how can i do it, i saw other day here a friend who was explaing how to pre codec fiat bsi grand siena(bsi 5) so , is it possible anyone explain for us how can we do it using zed bull. look this video fiat code 2 caixa cinza. - YouTube (http://www.youtube.com/watch?v=TKdFWY2PVb0) this guy is saying he discovered the secret behing imo box fiat code, have a look, this is in portuguese audio. but i think i can translate , have a look.tell me what do you think about this information? he is selling a dump(and 2 transponder, pre codec, here what he claim ( 1 read the imo box,2 put the new dump(dump that you bought from him,3 the old key(that was working) and the new key(transpnder who came with the dump),bouth going to work normally, if you put that dump(new dump) , but if you put a key without any transponder , car will not start. i must record the dump in a client's imobox .

[3abas27]

Do you have a dump of the module 83?
sorry siera not module 83 but 62 i make confuse

[3abas27]

Do you have a dump of the module 83?
freind i have dump from ford ka for module 59 work on transpoder 4c with chip tms

[HenrichSGU]

freind i have dump from ford ka for module 59 work on transpoder 4c with chip tms

u have read transponders programed inside this dump ?
maybe u cat post this transponders IDs here ?

[3abas27]

u have read transponders programed inside this dump ?
maybe u cat post this transponders IDs here ?
of course freind here tiris format
7EAAF84E0200000000873F7E0000

[dam495]

sierra did you fix that bug, opel2r mask lt72, car not start, tm370 is okay, but lt72a ins't.

[sierra]

sierra did you fix that bug, opel2r mask lt72, car not start, tm370 is okay, but lt72a ins't.

You are talking about Module 1?

How do you do for Opel2R transponder?
Dumps from Opel2R not defined in the program.

If you have a car on which you can check email me.

[cyrixcard]

any one know good exchanger for Liberty Reserve to Webmoney. I have been robbed on internet 3 times trying to get effi. Please help. I am hurting. Dont have money for Tmpro, Tango or Tagkeytool. Effi good starting point. I need donate to promote good work and get this free software.

[cyrixcard]

Robbed 3 times trying to exchange from Liberty reserve to Webmoney to donate to Sierra Project for effi. I am hurting deeply

[whiskeyman]

have you asked sierra yet?

[3abas27]

have you asked sierra yet?
ALL TALK ABOUT THIS GREATEST PROGRAM AND WANT IT BECAUSE IS FREE
SIERA IN FIRST PAGE EXIGE THAT THIS PROGRM CAN BE OBTAIN FOR FREEE IF YOU COTRABUTE IN FORUM BY POSTING DUMPS TO HELP SIERA TO WORK EASILY
IF YOU CONTRABUTE YOU WILL GET IT FOR SURE

[saadiweb]

u very good

[3abas27]

u very good
module 13 tested today perfect
thanks to siera

[Fallen]

Sierra, people are trying to donate to your project to get updates but it appears to be quite hard to do.
I understand you want people to contribute to your work with cars to test the modules on but not everybody has ready access to cars every day.

I'm surprised people are not selling it to the people who want to donate, or maybe they already are...?

[3abas27]

Sierra, people are trying to donate to your project to get updates but it appears to be quite hard to do.
I understand you want people to contribute to your work with cars to test the modules on but not everybody has ready access to cars every day.

I'm surprised people are not selling it to the people who want to donate, or maybe they already are...?

ALL FREIND GOT PROGRAM FROM STRONG SIERRA SHOULD NOT STOP COTRUBUTING IN FORUM EFFI
BUT THEY SHOULD MULTIPLE EFFORT TO MAKE THIS PROGRM IN TOP

[sierra]

Sierra, people are trying to donate to your project to get updates but it appears to be quite hard to do.
I understand you want people to contribute to your work with cars to test the modules on but not everybody has ready access to cars every day.

I'm surprised people are not selling it to the people who want to donate, or maybe they already are...?


I do not see any difficulties for this :)
I answer all emails, unless of course did not write, "Give me the program" :D

[Fallen]

I do not see any difficulties for this :)
I answer all emails, unless of course did not write, "Give me the program" :D

Check your email again mate!
I used EFfi the other day on a job, it made me money, i'm trying to give you some back to thank you for your effort.

:)

[Vatan]

Dam495
Immo Box Fiat mask 1K59H
for you prepare this transponder(id48), is necessary you insert the pin code, word B,A.

[dam495]

Dam495
Immo Box Fiat mask 1K59H
for you prepare this transponder(id48), is necessary you insert the pin code, word B,A.

thanks but could you explain better i don't know how can i do it, could you please send for dam495495@hotmail the process , for exemplo i have dumps for fiat imobox maks 1k59h, can you send something teaching how i must do it, sorry but fiat imobox 731,732 and 928, ,fiat has deployed this imobox , cars made in my country in at least 90% , 10% are bcs and dash, so this the reason why i am looking solution for these imobox, for me working with these imobox i must at least usd 4000, so very expensive, i know it's possible do it using zed bull china , so i only need find out how.

[3abas27]

thanks but could you explain better i don't know how can i do it, could you please send for dam495495@hotmail the process , for exemplo i have dumps for fiat imobox maks 1k59h, can you send something teaching how i must do it, sorry but fiat imobox 731,732 and 928, ,fiat has deployed this imobox , cars made in my country in at least 90% , 10% are bcs and dash, so this the reason why i am looking solution for these imobox, for me working with these imobox i must at least usd 4000, so very expensive, i know it's possible do it using zed bull china , so i only need find out how.
WHATS PROGRMMER THAN OMEGA CAN READ THIS 1K59H MASK,,?

[lidons]

Hello Sierra.

you can do, contrary ..
DUMP calculate Bytes from transponder ... to put manually?.

example.

temic 11 = 01 78 F4 2D => 7d 5f 00 00 80 1e 2f b4 YES

temic 11 = 7d 5f 00 00 80 be 83 c6 => ?? ?? ?? ?? => (( 01 7D C1 63 ))

[sierra]

Hello Sierra.

you can do, contrary ..
DUMP calculate Bytes from transponder ... to put manually?.

example.

temic 11 = 01 78 F4 2D => 7d 5f 00 00 80 1e 2f b4 YES

temic 11 = 7d 5f 00 00 80 be 83 c6 => ?? ?? ?? ?? => (( 01 7D C1 63 ))

I guess you can. I have not even thought about it. These transponders are so cheap, it is easier to make a new one :)

[lidons]

a customer took away all the keys. and knows who is afraid to take the bike. :devil:

I think it is easier, Old Dump ring and get new keys, this is cheaper than new DCI.
. :questionmark:

Greetings Sierra, and that everything will go well. :tee:

[sierra]

I agree. This feature can be useful.
Let it be :)

That's normal?
EFfI ReCalc - YouTube

[lidons]

thanks for your work, you're very smart, for me is a great job.
now take you to the practice, I'll have you informed.

[Vatan]

Dam
The Effi Software make is this 100%

[3abas27]

thanks for your work, you're very smart, for me is a great job.
now take you to the practice, I'll have you informed.

dump from aygo toyota is like citren c1 and peugeot 107

[dam495]

Dam
The Effi Software make is this 100%
can i do fiat imobox 732 ? using effi? are you sure?

but can you explain how can i do with
imobox 928, and 731 , they are gray and the key has a number 2,

so remap 2, remap 3, and obd map , 100% with this imobox but, very expensive 4000 usd.

10 usd , for who explain how pre codec this imobox
731,732, and 928. using zed bull .

[lidons]

dump from aygo toyota is like citren c1 and peugeot 107

Do not you want to order. :questionmark:

Sure you are 4D texas, and there is a part that goes encryptada.

the best thing is view this file with tango and not close the series encryptada to see where it falls.
I think it has only two keys high the DUMP.

and then pass it to Sierra.

[3abas27]

Do not you want to order. :questionmark:

Sure you are 4D texas, and there is a part that goes encryptada.

the best thing is view this file with tango and not close the series encryptada to see where it falls.
I think it has only two keys high the DUMP.

and then pass it to Sierra.


IT DEPENDS ON YEAR FREIND BRFORE HAD THIS GREAT SOFT EFFI A FREIND OF ME HAD TMPRO2 FROM BOGDAN HE MADE ME TROSPODER READY TO RUN THE CAR MY CAR WAS CITROEN C1 AFTER I DOWLOAD THE SOFT TMPRO TO SEE I OPEN MY FILE FROM CI CITROEN IN PAGE TMPRO I GET TOYOTA AYGO . YARIS .VENSIS ECT....
MY ORIGINAL FILE FROM CITROEN I SENT IT TO SIERRA THE ONE I POST IN FORUM IS FROM AYGO I GOT IT FROM FORUM

[3abas27]

IT DEPENDS ON YEAR FREIND BRFORE HAD THIS GREAT SOFT EFFI A FREIND OF ME HAD TMPRO2 FROM BOGDAN HE MADE ME TROSPODER READY TO RUN THE CAR MY CAR WAS CITROEN C1 AFTER I DOWLOAD THE SOFT TMPRO TO SEE I OPEN MY FILE FROM CI CITROEN IN PAGE TMPRO I GET TOYOTA AYGO . YARIS .VENSIS ECT....
MY ORIGINAL FILE FROM CITROEN I SENT IT TO SIERRA THE ONE I POST IN FORUM IS FROM AYGO I GOT IT FROM FORUM

HERE DUMP FROM C1 THAT I HAD PROBLEM BEFORE TMPRO MADE IT ON TPX2

[zygzook]

On maths went to A BEER NOW regrets
I like to play in the COC DO NOT KNOW WHAT

[3abas27]

ZAWSZE BOLI SUMA KONTROLNA
REGE
NA MATEMATYCE CHODZILEM NA PIWO MUSLA***321;EM ***379;E SIE NIE PRZYDA
Wilki-Son of the blue sky - gitara cover by ZyZaK - YouTube (http://www.youtube.com/watch?v=11NIt9en93c)
still polish language and add music to the forum?????
we want to help siera strong siera to develp more effi by helping him with any news not to distrub him

[zygzook]

commodore +4
http://en.wikipedia.org/wiki/Commodore_Plus/4
I started at the

[Vatan]

See the image.....

[Vatan]

See the file....

[Vatan]

See the file...

[cpsservice]

super god vejledning mange tak

[socrates66]

Excellent, I've learned a lot from the comments, I got the software for another locksmith of my country, is very useful.
Thanks to all who post.
Best regards, Jose.

[kenancatli]

sierra
you doing great job
thanxxxxxxxxxxxx

[dam495]

need one information yamaha modules , are they working?

[Vatan]

Sierra.... any news for Effi software... congratulations...!!!

[ajman5252]

yeah any latest news??

[CarDiag84]

For Sierra

[Vatan]

Dam... see the file attached and data for you edit on dump.

TRANSPONDER 4D ID62
PAG1 - FF
PAG1 - 00
PAG3 - 91 4B 21 01

[iozo]

module 66 not work , 2 X tpx2 go to trash ... pin code is correct but when try to program transponder .. software say - unsuccessful and chip is locked ...

[sierra]

module 66 not work , 2 X tpx2 go to trash ... pin code is correct but when try to program transponder .. software say - unsuccessful and chip is locked ...

I do not know, Chinese ZED-Bull TPX2 can record or not.
EH2 records with no problems.
Who be one of you wrote TPX2 with any module?

EFfI 66 - YouTube

[3abas27]

I do not know, Chinese ZED-Bull TPX2 can record or not.
EH2 records with no problems.
Who be one of you wrote TPX2 with any module?

EFfI 66 - YouTube (http://www.youtube.com/watch?v=wM_r8NDqumY)
first of all thanks siera for this helpful clarification
i use tpx2 on module 62 no problem succefully producted
we should pay attention on tpx2 made if it is china made not work if from JMA WORK 100%

[sierra]

we should pay attention on tpx2 made if it is china made not work if from JMA WORK 100%
I recently purchased several pieces on PCF7936 carsung, the problem with them at all, constantly produce an error in the recording.
Prior to that, bought from a guy from Saratov, with them never had no problems.

[3abas27]

I recently purchased several pieces on PCF7936 carsung, the problem with them at all, constantly produce an error in the recording.
Prior to that, bought from a guy from Saratov, with them never had no problems.
I BOUGHY MORE TIMES FROM UOBD2 CHINA
NEVER HAD PROBLEM WITH ANY TRONSPONDERS
ONLY PROBLEM WITH TPX1 AND TPX2 BUT NEVER BOUGHT EH2 NEXT TIME I WILL POST RESULT
FOR TPX2 JMA ARE PERFECT AND CLONE ZED BUL QUICKLY WRITE ON IT

[iozo]

I do not know, Chinese ZED-Bull TPX2 can record or not.
EH2 records with no problems.
Who be one of you wrote TPX2 with any module?

EFfI 66 - YouTube (http://www.youtube.com/watch?v=wM_r8NDqumY)
10x siera but my idea was to made it whit batery less transponder .. anyway i made it whit sbb id 4d-60 carbon and proper pin code by EFfI
ps:TPX2 was 100 % JMA

[iozo]

FOR TPX2 JMA ARE PERFECT AND CLONE ZED BUL QUICKLY WRITE ON IT
write from dump file or direct copy ??until now, i never have problem with transponders because i buy from JMA dealer

[3abas27]

write from dump file or direct copy ??until now, i never have problem with transponders because i buy from JMA dealer
WRITE FROM DUMP I TESTED MODULE 62 FORD NO PROBLEM

[sierra]

10x siera but my idea was to made it whit batery less transponder ..
For the program is no difference EH2 or TPX2, it simply sends the data to the device. And already he writes ZED-Bull.

[ninja123]

I have problem with clone zedbull, not write to tpx1, but all EFfi modules ok with electronic heads and TPX2 original, work perfect.

Thanks sierra for this project.

ps - I looking for solution for fiat systems ID46 with pcf7946, anyone have solution??

ninja

[3abas27]

WRITE FROM DUMP I TESTED MODULE 62 FORD NO PROBLEM
perhaps you had harware clone zedbull
my one is frimawre 5.00 no problem with it it make module 62 on tpx2x good
i had also zedbull frmaware 5.02 i will test with it and make result

[3abas27]

perhaps you had harware clone zedbull
my one is frimawre 5.00 no problem with it it make module 62 on tpx2x good
i had also zedbull frmaware 5.02 i will test with it and make result
is this the problem when you buy clone devise
in china not all seller sell good quality
my one zedbul is china one old one with red key
2 years work it with perfect
in you case freind try with a freinds clone zedbull for jujing
if problem is effi software problem or hardware ^problem

[badenaleks]

Today added another key for Toyota Yaris 08 with the aid of Effie. All added to the first EH2 then at TP***1061;2. Everything works thanks Sierra! EFFI A good project !!!

[badenaleks]

Sorry. Mixed languages

[badenaleks]

Toyota Yaris '08 (original key 4D-67). Added with the aid effi flight level one key (chip TPX2) everything works great! Checked chip EH2 works too (Everything works fine)!Sierra best

[iozo]

is this the problem when you buy clone devise
in china not all seller sell good quality
my one zedbul is china one old one with red key
2 years work it with perfect
in you case freind try with a freinds clone zedbull for jujing
if problem is effi software problem or hardware ^problem
my device is buy by local resaler ,my hw is clasic zb , before that can`t find onother hardware hire only zb mini .. by the way i can`t trust to any china saler ...

[3abas27]

Toyota Yaris '08 (original key 4D-67). Added with the aid effi flight level one key (chip TPX2) everything works great! Checked chip EH2 works too (Everything works fine)!Sierra best
normally yaris 2008 work on 4d-70 not 4d-67 last year i did one toyota yaris petrol with add key manually to dump with 4d-70

[sierra]

normally yaris 2008 work on 4d-70 not 4d-67 last year i did one toyota yaris petrol with add key manually to dump with 4d-70

In EFfI in Image Generator page1 has data 32, 52, 92 ...
For this car will not go. On this can be done through ID 70

[badenaleks]

Here screen key

[synkrotronic]

Hi.
This program unlock id 48 and produce an reusable one?
Have zed bull clone but can not find programmer say divice not responding,and need to work on one key locked with id48.
First time using it.

Thanks and Regards

[sierra]

Have zed bull clone but can not find programmer say divice not responding...
What program you have tried? EFfI or the original software?
Which version of SW ZED-Bull?

[synkrotronic]

What program you have tried? EFfI or the original software?
Which version of SW ZED-Bull?

Soft sent by dealer v508.
Mini Zed Bull clone firmware 5.02.
Tryed with EFfi downloaded from post 8 ,but see the same information " Div. not responding".

Thanks

[3abas27]

Soft sent by dealer v508.
Mini Zed Bull clone firmware 5.02.
Tryed with EFfi downloaded from post 8 ,but see the same information " Div. not responding".

Thanks
setting port is correct?

[chli1976]

Works EFfi with Zedbull on PCF7936

[synkrotronic]

Yes,port is correct,plug and unplug divice and show open port.
Try in two pc?s,the same error and with difernt usb cables.
Programmer work fine alone,don?t know if zed bull connection damage

[3abas27]

Yes,port is correct,plug and unplug divice and show open port.
Try in two pc?s,the same error and with difernt usb cables.
Programmer work fine alone,don?t know if zed bull connection damage
DID YOU TRY HARDWARE WITH SOFT ZEDBUL ?
IF SAME ERROR?

PERHAPS YOUR HARDWARE PROBLEM

[paul_12345]

This thread is about effi not hardware issues not related to effi.

[synkrotronic]

This thread is about effi not hardware issues not related to effi.

Sorry,for de post....if i can get hardware working,i should ask for EFfi complete software.
Soft from post 8 do not work with me.
Thanks for your attention
Regards

[Vatan]

Effi updade....
I would like to have this updated software, could someone help me?
My e.mail...
Thanks so much...

[synkrotronic]

I think you need to ask to sierra,send him a pm
(http://www.digital-kaos.co.uk/forums/members/119881-sierra/)

[kenancatli]

hello
I want make spare key, it can possibble with clone zedbull effi? or with clone SBB? I have pin code, which transponder use? have you manual? can I transponder clone? which transponder I use?
help please

regards

[didi_du_93000]

hello
I want make spare key, it can possibble with clone zedbull effi? or with clone SBB? I have pin code, which transponder use? have you manual? can I transponder clone? which transponder I use?
help please

regards

Can't clone this transponder, It's a ID48 can.
Must use a other ID48 can and learn with VCDS and code pin from the car.
You can found the pin inside ECU or dashboard.
the system on this car is IMMO3. you can found more information on Wikiross website.

Zed-bull can unlock used ID48.

Good luck.

[kenancatli]

Can't clone this transponder, It's a ID48 can.
Must use a other ID48 can and learn with VCDS and code pin from the car.
You can found the pin inside ECU or dashboard.
the system on this car is IMMO3. you can found more information on Wikiross website.

Zed-bull can unlock used ID48.

Good luck.
Can I use ID44 and ID48 CAN? two different keys?
regards

[madzar]

Good work from Sierra but he is not sharing and he is not selling the soft.I was hoping that I can use my cloned zed bull with this soft but while I was waiting for reply for my p.m. to him I bougt new tool and I put my zed bull clone away.

[badenaleks]

This is a project he sierra.I rosporyazhaetsya their software to your liking, and if you do not put a support in the creation of this project, then why are you offended? you need to write is not on the forum and on the E-mail Michael!

[bram380]

for Sierra SAAB 9-3 & 9-5 dumps, key & pin code address:

[lidons]

BRAM380 Thanks, you always helping,

[ajman5252]

thank ypu BRram

[912secured]

The software is his labor of love. What he does is up to him. He has hours (months) of programming in it. He could of just released his own programming unit and made tons of money off of it. The original clones had a eeprom missing (removed from firmware) and all of the internal hardware for connecting to external key programmers where not needed so scrapped. If you where lucky enough to get a copy of the soft why he was giving it out. Good to you. I used my friends original zedbull and minus the 4d/46 cloning, sierra software is on parr or better.

[bram380]

For Sierra:
Dump, key data, key address & checksum address for Jaguar X-type series (XJ, XJS, XK, XK8):

[sierra]

For Sierra:
Dump, key data, key address & checksum address for Jaguar X-type series (XJ, XJS, XK, XK8):

Which uses the original transponder? Megamos13?

[bram380]

Megamos 13

[Vatan]

Dump, key data, all key address for Yamaha s29190..
:goodpost:

[mecadriano]

Sierra friend, I have problem in a Mercedes Atego year 2011, 93c86 , I am gathering the pictures to post here, I will do it tomorrow,
he recorded with T5 transponder susseso, but the truck does not work, maybe you will be able to solve this, thanks

[sierra]

Sierra friend, I have problem in a Mercedes Atego year 2011, 93c86 , I am gathering the pictures to post here, I will do it tomorrow,
he recorded with T5 transponder susseso, but the truck does not work, maybe you will be able to solve this, thanks

Give your dump.

[andrius]

any updates soon maybe? :)

[sierra]

any updates soon maybe? :)

Check email :)

[djfelixrs]

Which version is the software EFfl today? How many modules? Use it but in version 101 modules and wanted to know maybe buy.

[mecadriano]

friend Siera ,as said yesterday, do not start the truck, I made this whole process and here, please check, thank you

[mecadriano]

siera ,file atego 93c86 .


A friend knows the logical file to generate key to this atego, very grateful for this truck still awaiting key
thank you

[dam495]

sierra did you solve the problem, opel2r lt72a, car doesn't start , i sent for you a dump a few weeks ago, did you find the problem, and you are doing a great job.

[eprommazza]

Which version is the software EFfl today? How many modules? Use it but in version 101 modules and wanted to know maybe buy.

2.0.0.1.4 (Current version) with 107 module ..

[sierra]

siera ,file atego 93c86 .


A friend knows the logical file to generate key to this atego, very grateful for this truck still awaiting key
thank you

I checked. In the program there is no error. Works the same as the original ZED-Bull.
Or an error in the original ZED-Bull or you do something wrong.

[mecadriano]

Sierra , tell if I read 16bits or 8bits, why can perhaps be misreading

[sierra]

Sierra , tell if I read 16bits or 8bits, why can perhaps be misreading
File atego 93c86 eprom1.BIN correct

[Vatan]

Mecadriano... The eeprom1(93c86) is file immo.

Sierra 100% correct.

[elchip]

I checked. In the program there is no error. Works the same as the original ZED-Bull.
Or an error in the original ZED-Bull or you do something wrong.

Its 100% OK in Zed amd your SW.
I was maked a couple time key's for MB Truck's no problem.

Regard's

[H.Wessel]

I destroy my zedbull 5.00 because I tried to updated to 5.02 cause it worked like a shit, and the question is, anybody is using or have a Mini-zedbull?? works fine or better buy Big ZED??
I ask at this thread because many people use ZED here...

[chli1976]

I search also for a working mini zed bull
Anyone have a link to a working zed bull mini

[whiskymk]

for sierra

[szkeptmen]

I destroy my zedbull 5.00 because I tried to updated to 5.02 cause it worked like a shit, and the question is, anybody is using or have a Mini-zedbull?? works fine or better buy Big ZED??
I ask at this thread because many people use ZED here...


I have a mini-zed-bull.
Works fine.
WBR

[datapage]

File atego 93c86 eprom1.BIN correct

No problems atego module.
ZED 100% SIERRA tested.

[badenaleks]

:goodpost:2.0.0.1.6 (Current version)!But you need to be interested in the Sierra, which was the last version. This is a big job
THANKS

[mecadriano]

thanks to everyone who confirmed atego module mercedes 100%
but do not understand why he does not work, the owner came up to my workshop
with key in hand said fall and broke. pld did I opened the reading, open zed bull, recorded in T5, but do not start the truck, any mistake is going indentificar want this location where this error,
Sierra friend can you send me the softwer with new update to try, maybe some error install on my pc.

[iozo]

thanks to everyone who confirmed atego module mercedes 100%
but do not understand why he does not work, the owner came up to my workshop
with key in hand said fall and broke. pld did I opened the reading, open zed bull, recorded in T5, but do not start the truck, any mistake is going indentificar want this location where this error,
Sierra friend can you send me the softwer with new update to try, maybe some error install on my pc.
check solder between board and eeprom-s

[chli1976]

Can i clone with Zed Bull a key from a Honda CBR900RR. I have a damaged ecu and a new used one and will clone the keys. (PCF7936)

With AVDI from a friend i can only read the IDE but no SK lo, SK hi and config.

Read zed bull this ?

I have also try to read a Key from a BMW S1000RR but with the same result.

[Yura123]

thanks to everyone who confirmed atego module mercedes 100%
but do not understand why he does not work, the owner came up to my workshop
with key in hand said fall and broke. pld did I opened the reading, open zed bull, recorded in T5, but do not start the truck, any mistake is going indentificar want this location where this error,
Sierra friend can you send me the softwer with new update to try, maybe some error install on my pc.

on atego the weak antenna, put chip T5 closer to the ignition switch

[FlaviusBFG]

Veryyyy goood ! :(( Now siera sale EFfI program !!!

[zygzook]

module 18 ok165903

165904

[H.Wessel]

Veryyyy goood ! :(( Now siera sale EFfI program !!!

where?????

[gepakg]

clone eprom from damaged ecu and you can use original key,inside eprom only serial id,crypto hi-lo and config and some service data

regards Gepa


Can i clone with Zed Bull a key from a Honda CBR900RR. I have a damaged ecu and a new used one and will clone the keys. (PCF7936)

With AVDI from a friend i can only read the IDE but no SK lo, SK hi and config.

Read zed bull this ?

I have also try to read a Key from a BMW S1000RR but with the same result.

[ajman5252]

can Effi do Mitsubshi Galant 2006 model??

[chli1976]

clone eprom from damaged ecu and you can use original key,inside eprom only serial id,crypto hi-lo and config and some service data

regards Gepa

Can i open this ECU, looks hard, strong sealed with silicon

[Vatan]

Mecadriano.... (93c86x16) transponder data fixed...
Add. skype or msn.. please..
douglas.vatan - no addys :rulez: !!!

[ninja123]

for sierra, can you add to your project mg rover, eeprom 93lc66, will give pictures too.

info here....

[zygzook]

166029zabawaw48passat

[coder5]

Hello
Will sierra software work with mini zed bull.
Thanks.

[lidons]

information ID48 Ssangyoung ECU VDO FLASH 29fxx gasoline.

http://rapidshare.com/files/2138149051/ssangyong_id48.rar

[gepakg]

slowly with patient looks easy,trust me:-)

use acetone will be more easy

regards Gepa


Can i open this ECU, looks hard, strong sealed with silicon

[daniersms]

Here is some info on Mitsubishi Colt Rodeo.Effi see the transponder as Honda with different chip

[dam495]

hi sierra , are there any news about fiat dash?

[zygzook]

iveco module 14 100% ok
166619
166620

[zygzook]

key vw turan micronas
166622
166623

[chli1976]

key vw turan micronas
166622
166623

How have you read this

[Raptor181]

XprogM maybe...

[djfelixrs]

Too bad that software updates have stopped in 106 modules. It's a great job and an essential tool to all! Someone can explain exactly why stop?