IAW8P.14 IMMO OFF

[spiridonas]

Hi guys i tried to remove immo from iaw8p.14 with immo tool v26.12.07 68HCP11A1 my problem is the car peugeot 406 start when plug the ecu only the first time.
Please i need solution for this problem.
Many thanks in advance.

[koyot]

Try and repoprt

[pajo]

do you know if it works this imo off solution

[ngakson2002]

Hi guys i tried to remove immo from iaw8p.14 with immo tool v26.12.07 68HCP11A1 my problem is the car peugeot 406 start when plug the ecu only the first time.
Please i need solution for this problem.
Many thanks in advance.

Hello mate,

i succeeded doing immo off on same car as followed

1) Program the MCU 68HC11A1 with Koyot dump above.
2) On the ECU Plug, Cut the cables 14 and 15 (immo lines)
3) Fit the ECU back to the car, connect the plug and start.

Will work 100 percent


Good luck

[kennedy-afn]

Hi guys i tried to remove immo from iaw8p.14 with immo tool v26.12.07 68HCP11A1 my problem is the car peugeot 406 start when plug the ecu only the first time.
Please i need solution for this problem.
Many thanks in advance.

Hi !

Can you show me how do you conect UPA-USB with this MCU mc68hc11A1.

I'm trying to read it and nothing !

Are you reading how what mcu ?

My UPA Voltimeter is all Ok and no device .

Thanks Kennedy.

[Zmann]

Connect as per the manual 3.8.1 MC68HC11A8/E9 PLCC52 but UPA won't read this MCU unless lifting some of the pin, sorry I don't know which one because my UPA doesn't need that.