Carprog China 4.1 or 4.5 Users thread

[tomuch]

ok i want here an topic only for users who have it to show what expirance they have.

I do :
BMW airbag without problem OBD M3 E36
Ford Fiesta 2006 Dash Odo without problem
Try BMW dont work to read 35080 under eeprom read without problem.
skoda 93c86 without problem .
My have an count 250.

please only for clone carprog owners .

wbrds
Michael

[mcgustoo]

i have china carprog but did they have counter? i heard is 300 tokens... its is true? its possible to renew this?

[olegario]

Hi, can you make screenshot with counter on.


P.s. I think carprog 4.01 .exe left unprotected.

[tomuch]

here it is


Hi, can you make screenshot with counter on.


P.s. I think carprog 4.01 .exe left unprotected.

[tomuch]

here some pistures from th pcb

[olegario]

And when you use it with 4.01 ver. it still counting?

[paul_12345]

here it is

but this clearly is 4.5 not 4.01.

[tomuch]

4.01 is the same i tested it both count only when you write not when you read

[chrismoore02]

Do do we know which chip has the counter info in?

Sent from my Galaxy Nexus using Tapatalk 2

[tomuch]

come on guys a tool with 250 counts for few dollar if he ended we buy a new one ;-) but not bad to read the chip an rewrite it again when empty

[paul_12345]

look at carprog full V4.01 repair tool for car odometers, dashboards, immobilizers (http://www.uobd2.com/wholesale/carprog-full.html)

click Technical Service

[chrismoore02]

Looking at that then it looks like the counter is in the software if that's the case what's stopping you loading it on a VM and reload when counter is at 0 or I'm I more confused than usual :D

Sent from my Galaxy Nexus using Tapatalk 2

[mcgustoo]

guys how check counter? for me not display it...

[radsky]

guys how check counter? for me not display it...

some cp clones displays counter at first time when you use write function, some of them will display counter after 100-150 writes. I don`t remember where but I saw some times ago the chinese web page with the fresh flashed chip for $40 and *.bin file for flashing yourself the chip for ... $200. So if this file exist on the market will be leak sooner or later and ....

[mcgustoo]

hi guys do you checked megane II kard programing? my carprog dont connect with this!

[tomuch]

do somebody know what is the counter chip and how can be read

[radsky]

do somebody know what is the counter chip and how can be read

the counter is in the bigger uc on the main board. you can`t read it bcoz it`s protected. As I wrote earlier you can find and buy flash file, a new one box for $70 without cables, or .... buy this - Indigo PCB & SW (http://indigopcb.org/manufacturer.php?id_manufacturer=5) and start your own production ;-)

[eprommazza]

can use software original 4.50 with clone... with stop counter

i think..

regards

[tomuch]

where tu buy this flashfile have you an link ?

[tomuch]

how you mean that with stop counter?


can use software original 4.50 with clone... with stop counter

i think..

regards

[eprommazza]

where tu buy this flashfile have you an link ?

i don t buy nothing flash file ...
regards

[tomuch]

do you have an link where i can buy this flashfile ?


the counter is in the bigger uc on the main board. you can`t read it bcoz it`s protected. As I wrote earlier you can find and buy flash file, a new one box for $70 without cables, or .... buy this - Indigo PCB & SW (http://indigopcb.org/manufacturer.php?id_manufacturer=5) and start your own production ;-)

[jmcartec]

Where can i by only a box for 70$ ?

[tomuch]

mayby somebody have an connection plan for the uc (xprog) then i can see if its really prtected

[mcgustoo]

I have tested on version 4.01:
Change and reset ecu simtec 70, simtec 75, delco hfsi2.6, laguna uch reading.... works great!
Not work megane card matching!

[albertros]

HI,
I confirm, not working megan card match. Can' t comunicate. Neither does original!

[Frykas]

hello does yours read 24cxx eeproms? cause ive got one that i was able to read 24c08 and 24c04 and my friend who bought one form same seller cant read these... and seller says that 4.01 doesnt support 24cxx series... but how can mine read them... something is fishy with them

[Music73]

yeah mine reads 24cxx fine.. 4.01 from greebid

Sent from my ViewPad7 using Tapatalk 2

[albertros]

Hi
just read 24c16 and 24cl16, 93c56 no prob

Got mine from obd factory jennis.

[Frykas]

and one more question... when you plug in your carprog and launch software in the dashboards/vw is vw polo 2001-> active or is it n/a?

[albertros]

Hi,
not active on 4.01 and 4.5

[mcgustoo]

Guys work with dash by OBD Ford Connect torneo read and write KM! You must tryin few times but work!!! I love you china!:-)

[andy99]

this is try

[freecom30]

bad news v4.5

grande punto obd2 n/a

i think v4.5 is not offer something more from 4.1

you need server online for any extra from 4.1

[freecom30]

bad news again

ford fiesta 1.4 16v 2006

from obd2......not read.....i dont try to write

i try with obd2 cable alone and with extra for ford

not read

[digimile]

hi
this tool can do VW 2011 or not....
thanks

[PremierD]

hi
this tool can do VW 2011 or not....
thanks


lol lol lol

[mastaflex]

hi
this tool can do VW 2011 or not....
thanks

you just got the answer from PREMIERD

[ALEXEI]

bad news again

ford fiesta 1.4 16v 2006

from obd2......not read.....i dont try to write

i try with obd2 cable alone and with extra for ford

not read

maybe you have found dash with eeprom

[mcgustoo]

bad news again

ford fiesta 1.4 16v 2006

from obd2......not read.....i dont try to write

i try with obd2 cable alone and with extra for ford

not read

You must connect few times!!!! Dash will off and read few times!!!

[dave11674]

hi guys im trying this new clone i just recieved on the focus single display clocks
with 9s12 mcu on board

ive wired it up as per diag in car prog but it just says init... attempt 1 ... 2. .... 3... then nothign
it dont display the km ?

i went into mc and slecected it amnually and still no joy
even with manual 8mhz xtal

not going

do i use the D1 adapter with the A10 lead ?

when i did it went up to attempt 5 and on each count the relay inside clicked...

thanks for any pointers

dave

[Music73]

Why not do diagnosticly in car... Supposed to work just fine... Not tried myself though..

Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2

[kevfield]

Try use 12v DC adapter pluged into interface , i have tested working .
via obd

Thanks kev

[dave11674]

hi guys i have it plugged into my 12v bench supply
i have these clocks laying around so just wanted to test it directly.

not a good start if it cant do simple 9s12 directly eh

do i need to use the D1 dongle ??
whats this dongle for ???

dave

[dave11674]

update

just tried it on my focus outside

used A1 cable then blue ford cable into that and into car.

loaded software up and wouldnt connect
tried a few times
and added external 12v too
still same
connect error

its going back
piece of junk

dave

[autocargo]

update

just tried it on my focus outside

used A1 cable then blue ford cable into that and into car.

loaded software up and wouldnt connect
tried a few times
and added external 12v too
still same
connect error

its going back
piece of junk

dave

You can build this hardware to perform a test on your carprog, then you will know for sure if is faulty. It's worth trying...

[dave11674]

thanks mate but its gone in the post back to china
she will sned me a new one
ill keep this info to hand tho

dave

[obdmaster]

thanks mate but its gone in the post back to china
she will sned me a new one
ill keep this info to hand tho

dave

Where did you buy it from m8??

[dave11674]

CARPROG FULL V4.01 - $93.30 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=2&products_id=552)

bought from here mate

dave

[obdmaster]

CARPROG FULL V4.01 - $93.30 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://www.gocardiag.com/index.php?main_page=product_info&cPath=2&products_id=552)

bought from here mate

dave

Trust you to go for cheapest lol

~~~~in cheap though lol

[Meat-Head]

Trust you to go for cheapest lol

~~~~in cheap though lol


YEAH, want a fight about it :roflmao: NOWT wrong with that

Dave mate - did the bag for the carprog it's self look like it had been opened?

how much did it cost to post the unit back?

[claudio35]

I bought my second carprog very cheap at 98 dollars gocardiag.com DHL shipping tracking says it is in flight. gocardiag.com 100% ok

ask about the problem and answered counter inside this:

if that proble appeared ,it is simple to solve it, use one software to write the data again, don't worry about it,::.........

[autocargo]

it would be nice to tell us more about this...Have you got this software?

[claudio35]

I have not soft, "Jo" told me to send it if I have the problem, as I have not come yet not problem.

[radsky]

I have not soft, "Jo" told me to send it if I have the problem, as I have not come yet not problem.

Jo is the first chinese seller that have a solution for counter in cp? I don`t think so.

[cipijoint]

lets share here the serial number of the CARPROG clones.
for example here is one : 081105CAR001773I

have no counter MCU

[sepistar]

lets share here the serial number of the CARPROG clones.
for example here is one : 081105CAR001773I

have no counter MCU


mine are exactly the same number.
btw did yours read 24cxxx?
regards

[carradio2001]

I bought my second carprog very cheap at 98 dollars gocardiag.com DHL shipping tracking says it is in flight. gocardiag.com 100% ok

ask about the problem and answered counter inside this:

if that proble appeared ,it is simple to solve it, use one software to write the data again, don't worry about it,::.........
Did you received all cables and CD ? In the photo from site not appear !

Carradio2001.

[sepistar]

Did you received all cables and CD ? In the photo from site not appear !

Carradio2001.
I bought from them and yes,it came with all cables and cd included.

regards

[claudio35]

Did you received all cables and CD ? In the photo from site not appear !

Carradio2001.


Even this comes flying over the Pacific

[dave11674]

Yes i paid $35 i think for dhl postage. The bag the car prog came in was just a clear bag with tape stuck over the top to seal it.

Jo has aggreed to swap it for another.

Went to postoffice to send back n nearly shat myself n fell on the floor when he told me it was ?55 to send to china !!

Anyone know a good courier with tracking service !???

Dave

[verica]

also got carprog from china read opel ecu wia obd ,read 24cxx but you must put external power to carprog ,but didnt manage to read opel ecu on the bench

[radsky]

Yes i paid $35 i think for dhl postage. The bag the car prog came in was just a clear bag with tape stuck over the top to seal it.

Jo has aggreed to swap it for another.

Went to postoffice to send back n nearly shat myself n fell on the floor when he told me it was ?55 to send to china !!

Anyone know a good courier with tracking service !???

Dave

Drop email to Jo that you send to him only pcb inside the box. Ship this small piece by airmail registered letter. You will save a lot of money.

[sepistar]

also got carprog from china read opel ecu wia obd ,read 24cxx but you must put external power to carprog ,but didnt manage to read opel ecu on the
bench

mine did not read 24cxx no matter if standard or mit external power.

regards

[albertros]

Yes i paid $35 i think for dhl postage. The bag the car prog came in was just a clear bag with tape stuck over the top to seal it.

Jo has aggreed to swap it for another.

Went to postoffice to send back n nearly shat myself n fell on the floor when he told me it was ?55 to send to china !!

Anyone know a good courier with tracking service !???

Dave

I used these people, on the ball!


Mine from Jo reads 24cxx without external power

Cheap Parcel Delivery & Courier Services | Worldwide Parcel Services Ltd (http://www.worldwide-parcelservices.co.uk/)

[bacila]

You can build this hardware to perform a test on your carprog, then you will know for sure if is faulty. It's worth trying...
carprog A1 adapter uses high speed can and will need low speed 120kbps need make adapter or can work wih fail safe mode

[8k65m]

How you determined this?

[meteor80]

Hello.

My Carprog works OK with airbags, and reads fine 93x 95x 24x RA57, adapter A1 test OK, hardware test OK, but when I try to make some dashboard using clips then I have message: "device not respond"
Tested with Berlingo Rav4 Berlingo BSI.
Maybe someone have any solution for that?

[sky833]

ok i want here an topic only for users who have it to show what expirance they have.

I do :
BMW airbag without problem OBD M3 E36
Ford Fiesta 2006 Dash Odo without problem
Try BMW dont work to read 35080 under eeprom read without problem.
skoda 93c86 without problem .
My have an count 250.

please only for clone carprog owners .

wbrds
Michael

i know CARPROG FULL v4.01 but i dont heard CARPROG FULL v4.5

[Meat-Head]

Berlingo BSI.
?


ok, it didn't work, but what was the plan had it worked?

[meteor80]

ok, it didn't work, but what was the plan had it worked?
There is option in Carprog- berlingo 95160, so I desoldered 95160 and using clips.

[Meat-Head]

There is option in Carprog- berlingo 95160, so I desoldered 95160 and using clips.

what i meant was, was you IN-correcting milage or reading immo pin?

[8k65m]

My Carprog works OK with airbags, and reads fine 93x 95x 24x RA57, adapter A1 test OK, hardware test OK....
Hi!
Who can look at the board A1 and compared with that in the photo? It seems that missing something.
Regards.

[obdmaster]

this is the problem with clones only 80% of functions work at best. And if its a programmer like carprog is either diagnostically or direct, then its vital it does it correctly.

Plus when customer phones and says "can you do this job for me. And you think "Carprog will do that".

Customer brings you vehicle or you travel 20miles to vehicle. And then your honky tonk carprog wont do it, and then your Honky tonk carprog creates another problem on the vehicle.

Who you gonna call??? Dont think Codecard will be that interested. lol

These clone carprogs are ok as a toy, but you wouldnt catch me using them professionaly on someones vehicle.

But good luck to you guys, who have alot bigger balls than me.:eating:

[drpeter]

this is the problem with clones only 80% of functions work at best. And if its a programmer like carprog is either diagnostically or direct, then its vital it does it correctly.

Plus when customer phones and says "can you do this job for me. And you think "Carprog will do that".

Customer brings you vehicle or you travel 20miles to vehicle. And then your honky tonk carprog wont do it, and then your Honky tonk carprog creates another problem on the vehicle.

Who you gonna call??? Dont think Codecard will be that interested. lol

These clone carprogs are ok as a toy, but you wouldnt catch me using them professionaly on someones vehicle.

Just like the original carprog.

[obdmaster]

Just like the original carprog.

lol

Tried my original carprog on a 2011 Ka, and it must of took 9 or 10 times to connect to cluster carprog doesnt seem that stable to me. Not good ,my abrites connected first time but both would only increase mileage.

[drpeter]

lol

Tried my original carprog on a 2011 Ka, and it must of took 9 or 10 times to connect to cluster carprog doesnt seem that stable to me. Not good ,my abrites connected first time but both would only increase mileage.

I don't like carprog. I bought the clone but it reminds me of another tool. Unstable and unreliable. There are not many stable laptop/cable combinations but Smok is one of them.

Go for stand-alone solutions.

[Meat-Head]

These clone carprogs are ok as a toy, but you wouldnt catch me using them professionaly on someones vehicle.

But good luck to you guys, who have alot bigger balls than me.:eating:

my abrites connected first time but both would only increase mileage.

CONFIRMED Audi A4 2004 RB4 CRYPTO cluster IN-correction works

think there was a thread about ka/fiat 500 increase on IN-correction only.

[meteor80]

what i meant was, was you IN-correcting milage or reading immo pin?

When I push "Read KM" i have "device not respond"

[ALEXEI]

those who advertise this shit clone tool I think they are resselers.
else I cant imagine how can someone say that this is profi tool working like original.
I also bought one for test. work less than half like original. but for this money even one function if it works good there is a gain

[Meat-Head]

those who advertise this shit clone tool I think they are resselers.


NOPE - but when my counter is ZERO will try and sell you it.
Does that count?

[ALEXEI]

my programmer is countless. would you buy it ?

[chrismoore02]

We not got a solution for the counter yet?

Sent from my Galaxy Nexus using Tapatalk 2

[ALEXEI]

We not got a solution for the counter yet?

Sent from my Galaxy Nexus using Tapatalk 2

Chris please pick up your signature because I know that you arent sending all mess from Iphone.
the answer for the question is : yes there is solution for counterless. flashing mcu

[Meat-Head]

We not got a solution for the counter yet?

ON TOPIC:-

only used mine for the first time today, so not had a play with it as yet.

did post in the other thread about think tach universal after 50 IN-corrections it would lock out, there was a cheet for it, need to find it and review the thread, don't know if this logic can be applied to this system.

seems strange people using it to do normal eeproms when other tools can be used, saving the counter.

[chrismoore02]

I am using my phone. Use it more than PC nowadays :D I need to sort out my signature and profile pic etc when I get 10min

#inserts new signature here lol#

[ALEXEI]

I am using my phone. Use it more than PC nowadays :D I need to sort out my signature and profile pic etc when I get 10min

#inserts new signature here lol#

realy Im not curious where from are you sending your mess

[chrismoore02]

Your right you would just use upa etc. I'm sure I have some instructions somewhere about resetting old tacho pro counter will have to dig it out. Counter must be stored in eprom I know someone on here has the solution but are not willing to help or share.

[Meat-Head]

yes there is solution for counterless. flashing mcu


ON TOPIC:-

Please do tell. can we use carprog to flash it's self lol

Just looked at orginal 'short block' but looks like it's going to be dear.

ON TOPIC:-

With 'flashed' mcu and stop the counter, can orginal software be used?

(even if you leeched a valid serinal number?)

[ALEXEI]

jtag programmer needs to be used for flashing this mcu

[Meat-Head]

ON TOPIC:-

1) Can the software be modifiyed to work without the hardware
2) What is the situation with the decode radio by ser no? EG
"Jeep & Scum Of The Earth"?
3) Can you show us more about flashing the MCU?

Thanks.

[chrismoore02]

What mcu is in carprog? Is it atmega?

[ALEXEI]

it was posted before

[claudio35]

What mcu is in carprog? Is it atmega?

I think it's NEC , But do not know how to backup, flashing the MCU?

[ALEXEI]

I think it's NEC , But do not know how to backup, flashing the MCU?

how do you know this ?

[claudio35]

here some pistures from th pcb

I guess it's

[8k65m]

How many words in the discussion! And nobody wants to answer my question in http://www.digital-kaos.co.uk/forums/f174/carprog-china-4-1-4-5-users-thread-275395/index5.html#post1618154 :(

[sepistar]

My Carprog works OK with airbags, and reads fine 93x 95x 24x RA57, adapter A1 test OK, hardware test OK....
Hi!
Who can look at the board A1 and compared with that in the photo? It seems that missing something.
Regards.

just loocking into A1 board,and is the same as your.seems in that place must some piece fitted,but what?

regards

[sepistar]

somebody try to update A1 adapter to A1+?

regards

[Music73]

Hi...

Not sure if you have tried this again or if someone else has mentioned it since but I have just tried mine on a 2005 focus without any issues... But you don't use the blue ford plug aswell... Just use the A1 lead.. also done a 2010 fiesta through obd socket... Read and saved chip first on both cars... Then changed them... No problem... Won't connect with blue lead though...

Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2

[8k65m]

Hi!
My CarProg has a strange blue wire (see photo). Anyone can upload photos of PCB CarProg both sides?
Best regards.

[tehnosoftex]

I guess it's
It is not atmega.
It is arm mcu
AT91SAM7xxxx

[dave11674]

Hi!
My CarProg has a strange blue wire (see photo). Anyone can upload photos of PCB CarProg both sides?
Best regards.


hi mate mine has this simple mod but just same as your wire

mine dont work at all

think ill have a play with this test board c if that returns any help !!
may try with eeproms too
tried with ford focus 2005 direct and OBD
both failed

dave

[dave11674]

ok guys i made the test dongle

here are my results


as you can see by the carprog test i have a short on pin 3 !!!
the D1 simply wont test at all, not sure if this has somethgin to do with the above fail !!

can any1 advise ?

thanks

dave

[dave11674]

UPDATE

ok so i took the number 4 chip off
74HC125D

and re run the test
see attached pic

i know it wouldnt fix the problem but was just checking
so may b this chip is faulty !!!
i could take the same chip off my D1 board n put it on here to test !!!

what ya recon ?

can get new ones from farnells tomo

dave

[ALEXEI]

It is not atmega.
It is arm mcu
AT91SAM7xxxx

thats why i wrote this can be programmed with Jtag. Y use wiggler

[8k65m]

[QUOTE=dave11674;1621328]UPDATE

ok so i took the number 4 chip off
74HC125D

Hi dave11674!
I have the same problem.
This is from CarProg repair kit.pdf :
"If your CarProg not work - make test with adapter A9 first!!! If CarProg hardware test fail - in most cases you just need exchange 4x 74HC125 integrated circuit. Exchange all 4 74HC125 together!!!"
Maybe this will help you.
Regards.

[Meat-Head]

[QUOTE=dave11674;1621328]

74HC125D



DAMM IT.

just sat down, *THINK* that's what's in a finest quality KKL lead.

got one in kitchen, but going to be late for work.

[dave11674]

cool

im just about to order 5 of these but replace them with the ST micro ones as the NXP ones seem a little cheeeeep :)

also i swapped the chips over from teh D1 adapter board and getting same problem
so ill swap all 5 out for ST ones n let u know.

will report back in a few hours.

dave


UPDATE...

can you guys post up MCU shots pls ?
im sure i have a leg slightly moved over
just wanna double check

check my pic black arrow

thanks

dave

[8k65m]

Maybe it will be useful to you
Regards

[dave11674]

ok guys

i removed the short.

replaced all 4 74HX125's and get a full OK on teh main test of the pcb
but when i test the D1 adapter in line i get no response error

any1 with anymore ideas ??

what do we use this D1 for ?
whats its main fucntion for ?

also does any1 have any wire up diags for teh car radio's ? in my pdfs i got there is none !

dave

[Meat-Head]

replaced all 4 74HX125's
also does any1 have any wire up diags for teh car radio's ? in my pdfs i got there is none !



1) Where did you get the 74h from - cost?

2) *THINK* you can leech some stuff from codecard site.

[audiotek]

Hi!
My CarProg has a strange blue wire (see photo). Anyone can upload photos of PCB CarProg both sides?
Best regards.

Maybe I'm wrong or my carprog clone it's different from yours, I saw your pictures and if I test the lines in my carprog and put the cable exactly as yours there is a shortcircuit between the pin 7 and 8 in the DB25 connector, anyway I run the hardware test in my carprog and all it's OK (without the cable, I think It's wrong for mine)...

[Nikolya_Detkov]

Hello. At me ARM probably died. Isn't defined by USB port. Looked for the reason why doesn't read 24C.... Short circuit under the processor seemed that. Measured by a tester, cut a path. And all ceased to be defined. Who can is rich with a flash from this stone (option to change if)

[dave11674]

1) Where did you get the 74h from - cost?

2) *THINK* you can leech some stuff from codecard site.

hi mate

i got the 74HC's from down road to me (farnells)
only a 5 min drive so nice n handy

grabbed myself a few 95 eeproms too
so i decided to have a play with the A5 adapter to rean n write to the 95160

so went to eeprom n selected my device
read the chip = OK
loaded a pug 206 bsi dump on it and wrote = OK

so went to 206 bsi program and tried to read KM = BULLSHIT
would not read
said not responding ?!?!?!?!

wtf is it with this thing !!!

but if i go back to eeprom and do it directly its fine ?!?!?

dave

[meteor80]

hi mate

i got the 74HC's from down road to me (farnells)
only a 5 min drive so nice n handy

grabbed myself a few 95 eeproms too
so i decided to have a play with the A5 adapter to rean n write to the 95160

so went to eeprom n selected my device
read the chip = OK
loaded a pug 206 bsi dump on it and wrote = OK

so went to 206 bsi program and tried to read KM = BULLSHIT
would not read
said not responding ?!?!?!?!

wtf is it with this thing !!!

but if i go back to eeprom and do it directly its fine ?!?!?

dave

I have the same problem and cannot find where is the problem.

[blackpirate]

anybody knows if it will work on dash ford focus 1.8 tddi m/y 2000?(by obd of course)

[captain crackers]

dave11674, on the 3rd 0f July you posted that you had sent your carprog full back for a replacement. Is the one you are going to replace the buffers on the replacement? Arthur.

[Meat-Head]

anybody knows if it will work on dash ford focus 1.8 tddi m/y 2000?(by obd of course)

not going to argue, but think it's a no.

i asked, just the later ones with 9s12 or something.

IF you do have a play, can you clone a dashboard?

thanks.

[blackpirate]

gotta get a TU asap!:)

@MH
PM me what u need!

[Meat-Head]

@MH
PM me what u need!

only intreasted in if you can copy a speedometer, because there a COMMON fault non start 'can error' something goes in the speedo head

just intreasted if can use a second hand cluster

If you have one of these, would like one, thanks,.

http://www.digital-kaos.co.uk/forums/members/81877-meat-head/albums/tracy-barlow/3553-article-1277766-09834816000005dc-387-306x453.jpg

[claudio35]

hi mate

i got the 74HC's from down road to me (farnells)
only a 5 min drive so nice n handy

grabbed myself a few 95 eeproms too
so i decided to have a play with the A5 adapter to rean n write to the 95160

so went to eeprom n selected my device
read the chip = OK
loaded a pug 206 bsi dump on it and wrote = OK

so went to 206 bsi program and tried to read KM = BULLSHIT
would not read
said not responding ?!?!?!?!

wtf is it with this thing !!!

but if i go back to eeprom and do it directly its fine ?!?!?

dave

I have the same problem with nissan primera 93C56

said not responding, reads and writes only in the eprom menu, also occupy the tachosoft....

[bluedid]

I have try the clone carprog (with serial number 1224)

Skoda fabia 2008 eeprom 93c86 OK
24CXX read-write OK
93cXX read-write OK
Ford Fiesta 2004 (with 2 lcd displays-via OBD) NG

[bochen]

Just wondering why so many people use Carprog as eeprom programmer. It is much easier to use an external eeprom programmer such as Beeprog for example than complain about something doesn't work. Let's leave this tool for odometer correction or pin reading in Opel cars. China Carprog is good value for money but I would never risk reading an eeprom with it having Jetprog on the shelf.
Regards.

[audiotek]

Just wondering why so many people use Carprog as eeprom programmer. It is much easier to use an external eeprom programmer such as Beeprog for example than complain about something doesn't work. Let's leave this tool for odometer correction or pin reading in Opel cars. China Carprog is good value for money but I would never risk reading an eeprom with it having Jetprog on the shelf.
Regards.

If you try to work with a Vw Micronas + 24xx dashboard and your carprog can't read any 24xx eeprom directly, how do you will make the job? I don't even think to make a test with this kind of dashboard, you will have a bad result, maybe an useless dashboard...

[autocargo]

Looking at codecard site for the repair kit I can see 4x 22uF capacitor to eventually replace yours if carprog not working. Now looking at the clone if I'm not mistaken there are 10uF capacitors... I'm I right? Can anybody confirm this? Regards.

[dave11674]

can u post up pdfs for the rapairs mate

dave

[autocargo]

There isn't any pdfs as far I'm aware... but you can check out this link CarProg repair kit (http://www.codecard.lt/carprog/carprog-repair-kit-4x-74hc125-4x-22uf-capasitors-1x-mcp2515/prod_566.html)

[carradio2001]

Until now:
working: EEPROM
not working: Opel CAN Bosch EDC16-EDC16C9

Carradio2001

[carradio2001]

Just wondering why so many people use Carprog as eeprom programmer. It is much easier to use an external eeprom programmer such as Beeprog for example than complain about something doesn't work.
Because it is more easy to read / write in-circuit compared desolder/solder the eeprom .. I supose !

Carradio2001.

[Nikolya_Detkov]

At me the memory chip (24C...) - probably overheated. The processor wants that that from it to consider (I it tried to consider in a programmator as I2C eeprom - turned out nothing). Who can be knows that it for a chip. Or there are its contents. Thanks

[Meat-Head]

Who can be knows that it for a chip. Or there are its contents. Thanks

disagree if was 24CXX pins 1234 would all be joined.

meter pins 4 and 8 see if 5 volts on it. :ridinghorse:

[Nikolya_Detkov]

1 and the 2nd contacts in air 3 and 4 on weight(GND). on 8 +3.3 volt on 5 and the 6th impulses similar to the tire of data and synchronization for the tire I2C.

[Meat-Head]

ok, go to google and download the datasheet for a 93C46

then gocompare.com

[ahadi]

maybe off topic ,

Full function original carprog more than eu3000
one third functions of original for eu100 , very good :ridinghorse:

[captain crackers]

Meat-head, "go to google and download the datasheet for a 93C46". Anybody who actually decides to follow your usual useless information will find that a 93C46 has the ground on pin 5. If you don't know what you are talking about, Don't bother posting. Arthur.

[PremierD]

lol
lol
lol
lol
lol

[Meat-Head]

ok smart ........what chip is it in question

on phone so will look later

[captain crackers]

If the ground is, as stated on pins 3&4. Then it is definitely NOT a 93C46. What it is I don't know. That is why I did not try to be clever like you and post what it is not. By the way, mind the language, there are young people who read these posts. Still waiting! Arthur.

[Meat-Head]

well dk has a built in naughty word tool so if somebody says **** it # it out.

so it was the thought that counts

so we agree its not 24CXX

if powered up with chip out does it scream xxxx chip missing

[PremierD]

Ok people .. time for a cuppa ...