vw '99 with h62A, how to read ??vw '99 with h62A, how to read ??

[babilon]

vw '99 with h62A, how to read ??

dash maneti marelli, with 908AZ60 masked 8h62a.
i can't read with upa or xprog clone.

need security bytes ?

all pins needed are lifted, and all i get is device is silent, or time out error

help me please. :giveup:

[micromax]

you have wrong connection, when you read security 908 by xprog, you always have dump with AD AD AD AD .... if you have device silent check connection.

[babilon]

with upa, will autobaudrate work , even if is secured ?

[honingkoning]

vw '99 with h62A, how to read ??

dash maneti marelli, with 908AZ60 masked 8h62a.
i can't read with upa or xprog clone.

need security bytes ?

all pins needed are lifted, and all i get is device is silent, or time out error

help me please. :giveup:

What car is this and what tools you have.

Regards Adam.

[ALEXEI]

I dont know any vw with MM dash 908 inside. MM on vw has hc11
maybe Audi.

[babilon]

I dont know any vw with MM dash 908 inside. MM on vw has hc11
maybe Audi.

old one 377.919.033.JH M73 VW GOL Brazilian made
mask 8h62A 908az60 is visible, and the area is painted whit a red resin



What car is this and what tools you have.

Regards Adam.

upa ori , xprog 5.0 clone , K + can clone too

with k+can i was able to read eeprom, partially ... and was affraid to make changes. according tacho soft there is more eeprom that i can not see :stupido2:

Thanks for your support

[babilon]

sorted now. :lollypop:

seems PTC3 is not so "optional" ,only when its conected can work, upa ok, xprog not work till now.

so micromax was right, thanks :shakehands:


PD: anybody know a way to test hardware for xprog ??
i have used on hc11 ok, eeproms ok