View Full Version : E83 EWS 2F4A
kautuvera
26th July, 2012, 01:59 AM
Hi friends
DME Fault : 2F4A Interface EWS (Immobilizer) DME
What is the meaning of this error?
Not Start the engine
This is diagnostic not connect to EWS
Please help me:stupid:
kautuvera
26th July, 2012, 03:01 PM
nobody ? !
bram380
26th July, 2012, 04:32 PM
Use gt1 to synchrone ews to dme.
If still problem, read mcu from ews & post here.
kautuvera
26th July, 2012, 04:57 PM
Use gt1 to synchrone ews to dme.
If still problem, read mcu from ews & post here.
2 months ago I opened the unit to reduce the distance
http://www.digital-kaos.co.uk/forums/f174/ews4-4-change-odometer-268252/#post1538216
Now this file I got on the unit write but no difference is not
bram380
26th July, 2012, 05:45 PM
try these dump & post result
kautuvera
26th July, 2012, 05:59 PM
Hi friends
DME Fault : 2F4A Interface EWS (Immobilizer) DME
What is the meaning of this error?
Not Start the engine
This is diagnostic not connect to EWS
Please help me:stupid:
This is a new problem
ohkarol
26th July, 2012, 06:06 PM
if you cannot connect to ews yours ews module might be faulty (elmos chip inside is broken).
kautuvera
26th July, 2012, 06:11 PM
Which part?
bram380
26th July, 2012, 06:18 PM
This is a new problem
cars can crank but wont start?
If yes, key accepted by ews.
Key & ews okey.
try resynchrone ews to dme.
cars cannot crank with key?
if yes, key reject by ews.
Make new key or reset rolling code ews.
kautuvera
26th July, 2012, 06:36 PM
cannot crank with key
diagnostic not connect only to EWS
bram380
26th July, 2012, 06:45 PM
try with this dump
kautuvera
26th July, 2012, 07:16 PM
to you the test result
12v
17th October, 2012, 04:47 PM
anyone have flash for EWS 4.4?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.