Clone VW Golf 4 ECU

[speedy100]

Hello all,

I need to replace an ECU MM 61600.542.08 from a Golgf 4 1.6 16V gasoline with an other of similar serial number as can not find the same one locally.
Is it enough to read the old one via OBD and program the file to the new one via OBD also or...?

Thank You in advance
B.R.

[spiker1505]

You need to clone flash (obd) AND eeprom.

br
Gerhard

[speedy100]

You need to clone flash (obd) AND eeprom.

br
Gerhard

You mean the 29F400 (i believe it is) ?

B.R

[yugo45]

I believe is 27c512

[speedy100]

I believe is 27c512

No this specific ECU has 29F400.

B.R

[Shmortz]

you just need to find the same ECU from same engine used on VAG's then do the immo swaping procedure discribed in Ross-tech site or do immo off

[speedy100]

you just need to find the same ECU from same engine used on VAG's then do the immo swaping procedure discribed in Ross-tech site or do immo off

Unfortunately I can not find the exact same type and serial number.
The original is IAW 4MV.F 61600.542.08 and the closest i have found is IAW 4AV.VA 61600.394.08
Is this "same ECU" enough or not?

Best Regards

[Shmortz]

is this from car with same engine code?

[leandroks]

Swap the flash and eeprom and it is done

[speedy100]

Thank You all for Your help.
I have cloned the new (used) one with 29F400 and 95080 from the old unit. I will try and report...

B.R

[speedy100]

Sorry for the late reply. I had to be away...
Everything worked fine. Plug and play...

Best regards