smart for four

[almeida]

hello i have a smart for four to do soon
i need some advice please
i think at bsi is MC9S12DG128/MC9S12DG256
is possibel to read with upa or is ecurity?
some one have the connections for that bsi.
i read it must be bsi to 0 and dash what we need, is that?
thanks in advance

[batandball]

this is the 5 wire Smelecom and digi normal
are these the ones u want

[almeida]

hello
i not have the car
i?m not sure because i not have the car yet
it?s possibel to read with cas3 red?or etl?
it?s the only tools i have to read security mcu
cheers

[batandball]

hello
i not have the car
i?m not sure because i not have the car yet
it?s possibel to read with cas3 red?or etl?
it?s the only tools i have to read security mcu
cheers

I would say you could with both ?

[tiguan]

hello i have a smart for four to do soon
i need some advice please
i think at bsi is MC9S12DG128/MC9S12DG256
is possibel to read with upa or is ecurity?
some one have the connections for that bsi.
i read it must be bsi to 0 and dash what we need, is that?
thanks in advance


you can read with UPA, see pictures connector pin

Blue = RST
Green = bkgd
Purple = VCC
Black = GND

[almeida]

the bsi must be to 0 ?
dash what we need ?
cheers

[tiguan]

the bsi must be to 0 ?
dash what we need ?
cheers



DASHBOARD: Eeprom 93S66

BSI SIEMENS :
SIEMENS/VDO 5WK45104C
Motorola processor MC9S12DG128

BSI: You can 0_Km or just Enter Km

[almeida]

thanks for all
i check and give feedback
cheers

[vageric]

what is year of the car?
because before and after 2008 are different.

[almeida]

I not say the year but it's 2005
Cheers

[lupu_sandu]

2005 don't have secured MCU in SAM.
I made last week one with UPA and connection from Nyo4

[coz1780]

for SMART ETACS SECURED

Blue = RST
Green = bkgd
Purple = VCC
Black = GND[/quote]
here is the right picture has enigma wrong for SMART ETACS SECURED

[ssilvviu]

I have read MC9S12DG128 eeprom with Xprog, reset km with Nyo and write eeprom.
Now the car don't start.
I have no communication with ESP, Engine and Instrument Cluster.

SAM is 5WK45104C.

What could go wrong?
Maybe Xprog have messed the flash content?


Problem solved. One missed jack :)