PDA

View Full Version : Bora 1.9TDI immo


zoro1
28th August, 2012, 10:44 AM
Hi.I need immo of this motor - bosch 0281010651.
The car is with crash ,then battery was low ,and now immo is on.The car is not here i recive only ECU ,but i mast go to fix it in car.I need to be shure ,that immo is off,so if there is some other problem to search it.
Fantomisback
28th August, 2012, 10:52 AM
Hi.I need immo of this motor - bosch 0281010651.
The car is with crash ,then battery was low ,and now immo is on.The car is not here i recive only ECU ,but i mast go to fix it in car.I need to be shure ,that immo is off,so if there is some other problem to search it.


immo off......100% work
djoko.k
28th August, 2012, 10:55 AM
You could try to erase fault codes with vag and start the car...
zoro1
28th August, 2012, 11:18 AM
You could try to erase fault codes with vag and start the car...

O no i can not log in in to ECU!Immo in dash is bloking K line to ECU.

Fantomisback thanks i will try and post result.Is some thing else to do?Jast write file with programmer in to 29f400?
zoro1
29th August, 2012, 08:18 AM
immo off......100% work

Now i see the file, I hawe the same ,not working,Lost comunication with ECU!
I return ori file,make immo off in 24co4 and now i wait for response from onner.
zoro1
5th September, 2012, 01:49 PM
I start the car only with immo off from eeprom /24c04/.Immo lamp is flashing on dash,is solution for this?
DottoreBL
5th September, 2012, 03:25 PM
crash the led in dash :)
yugo45
5th September, 2012, 05:17 PM
I start the car only with immo off from eeprom /24c04/.Immo lamp is flashing on dash,is solution for this?
That is normal with immo off. Key is not match to cluster.
zoro1
17th September, 2012, 09:54 AM
Yes ,i put some TESA on dash to not flashing when working.,then brige k-line from dash to be able to read ecu from OBD plug.
Is there solution for immo off and dash no flashing?
yugo45
17th September, 2012, 03:13 PM
Yes ,i put some TESA on dash to not flashing when working.,then brige k-line from dash to be able to read ecu from OBD plug.
Is there solution for immo off and dash no flashing?
Yes , you need to adopt ECU to cluster + keys.
zoro1
18th September, 2012, 04:30 PM
is possible to adapt only ecu and dash?key is ordinery,no transponder?
yugo45
18th September, 2012, 07:19 PM
is possible to adapt only ecu and dash?key is ordinery,no transponder?
If the keys are not adopted to dash , immo light still will be flashing.
Like I said all those 3 needs to be match to not have immo light flashing.