GREAT WALL WINGLE 5 2011 KEY LOST

[achaccha]

Dear friends.
I have a car brand Great Wall Wingle 5 2011 with lost keys. can someone please help program the keys of this vehicle?
I would like to know what memory I should read.
attached images of the immo Delphi 28102099
regards

[vanos batam]

open ecu to fhoto..
thanks

[achaccha]

Dear Friend.
Please if you can help me to program a key or at least make immo off. can be seen in the memory 95 320 ecu, which I am publishing reading.
thanks

[vanos batam]

read m95320 8 bits

[achaccha]

Dear Friend.
Reading is published 8 bitz read with Upa.
regards

[achaccha]

Hello Friends. I tried to program this vehicle with a scanner original Great Wall, but asks me PIN. Someone can help get the PIN code in the dump of the ECU?
Can you tell me the keys for this vehicle are recorded in the immo or Engine ECU.
I think the keys are stored in the engine ECU.
I welcome your input and thank you for your help friends.
greetings and hugs

[achaccha]

Hello Friend.
I tried several files immo off for this ecu , but the engine does not start , I hope someone can help me and I need to do immo off ecu or at least I have to find the pin code.
perhaps it is necessary to read the entire file via BDM of the ecu, can someone help me with the connection? I have BDM100 and XPROG.
Thanks to all for helping.
greetings and a hug

[KriptoKey]

Hello Friend
Have you found any solution to your case? would be good to publish a picture of the microprocessor (macro photo)
thanks

[achaccha]

You can read F0887 (A) 1043KP405 QS?
Can you tell me what tools I use to read this microprocessor?
You can get the pin code using the VIN number?
I hope to find some solution to this case friends.
thanks

[achaccha]

Hello Friends.
Can anyone provide the pin code of this vehicle? I will be grateful for this help the vin number is:LGWDBC175BC641047
I'm sure you can program the key of this vehicle if I have the pin code.
Also need to know the chip that I use for programming.
thanks

[keygargoil]

Dear friends.
I have a car brand Great Wall Wingle 5 2011 with lost keys. can someone please help program the keys of this vehicle?
I would like to know what memory I should read.
attached images of the immo Delphi 28102099
regards

it looks like it may have a nec processor

[abadcinho]

I have a the same car I would like to know if somebody tried with Ci prog 300

Regards

[salim74]

I wonder if you have found a solution for this calculator model because I also have the same problem

[salim74]

I wonder if you have found a solution for this calculator model because I also have the same problem

[andygtr34]

Good afternoon someone already read this micro
help: Burnout:

[DOUGLASDL]

417757 file off

[DOUGLASDL]

417758417758

[andygtr34]

Not working thank you

[Keykamp]

hi. did u get the immo off for car or a solution to the key programming. i have a similar car with the same issue. any help ??

[Keykamp]

does any one have an original immo dump .assistance will be highly apriciated.

[klaudio]

does any one have an original immo dump .assistance will be highly apriciated.

I don't think immo off is possible on this models, try getting pin from immobox and program by obd2, http://www.digital-kaos.co.uk/forums/showthread.php/689579-Great-Wall-immo-box-pinout shows how to read immo box to get pin.

[lordcurtron]

Hey man,

Delphi Immo has a Small 6 legged 93C66 SOT-23 package.

TMPRO2 website has more info.

Attached Pinout which is located in VVDI Prog. If you read the dump I can get you the PIN.