Fiat Doblo 2004 delphi BCM

[cristyand]

Hy guys,
i have a problem with this fiat it's a 1.3 jtd, customer lost the keys, i tried to take out the 93lc66 from the BMC board and broke the 8-th pin, now i can't read the dump can someone advise me what to do next?
i've attached a pic with the BCM label.

best regards

[whiskeyman]

i have never tried myself
but i know of a lad that has ground down the chip and re attached a wire to the chip
then read file and write to new chip

[cristyand]

I tried but it doesn't work

[obdmaster]

What engine is your doblo?? You will need to either virgin engine ecu or immo off, i have few good 93lc66b doblo dumps. But there of no use till we know what we can do with engine ecu.

[cristyand]

the engine ecu is MJD 6JF D3 , i think a good bcm dump and virgin ecu will work or am I wrong?

[jaelgti]

Hi guys.
You may want to try.
I comets results.

[cristyand]

thanks, jaelgti but i need a good dump from BCM too.

[jaelgti]

Do not worry.
Your wish is my command.
Best regards.

[cristyand]

hy,
thank you for your cooperation jaelgti but i need the dump of 93lc66 from the BCM ( delphi ).

[obdmaster]

Here is good dump from a delphi bcm fiat doblo 93lc66b.

Good luck m8.

[cristyand]

problem solved, i used obdmaster's BCM file, added a key with zed bull (zed bull generated new file) wrote that into 93c66, virginized ecu and the car started.
thanks to all for support.

[daher]

hi cristyand

i have got same problem of you, i accidently need take off 93c66 to read dump but 4 pin was broked, i couldn't sold it to read it, so please you have only get a new eeprom and insert the dump getting from obdmaster (thanks of him) , this dump with adding a key can start directly .
thank you much

[daher]

hi obdmaster

please i have got same problem of cristyand, i accidently need take off 93c66 to read dump but 4 pin was broked, with thid dump making a key can start the car without using anything in the ecu
thank you much