mercedes c class eis cpu's`

[keygargoil]

i have here a mercedes c class 1998 with a faulty eis it has 2 cpu hc05x32 i have tried a repair file on the top chip but doesnt work so have now read the bottom one are these dumps suppost to be identical or different can someone look atthese 2 dumps and tell me what is wrong

[bram380]

renew esl & make sync with *das.
here your dump & keys:
hc05x32_repaired (https://www.rapidshare.com/files/390961557/mercedes-c-class-s659awh-eis-hc05x32-1h52a-cpu1_cpu2.rar)

[smayer]

i have here a mercedes c class 1998 with a faulty eis it has 2 cpu hc05x32 i have tried a repair file on the top chip but doesnt work so have now read the bottom one are these dumps suppost to be identical or different can someone look atthese 2 dumps and tell me what is wrong

Bram is fast, i' slowly :banghead::banghead:

[bram380]

next time, you will be first man.

[keygargoil]

i dont have das is there anyway of repairing the cpu the 2nd one from the inside looks ok but the top one looks bad

[vanos batam]

i dont have das is there anyway of repairing the cpu the 2nd one from the inside looks ok but the top one looks bad

no need stardiag
read ecu and ezs..
or pm me

[bram380]

try these dumps & make new key no.5 or 6:
ezs_fixed (https://www.rapidshare.com/files/3878654130/w%20s659.rar)

[keygargoil]

so can you not repair the file for cpu1 then i am going to go there tomorow morning and read the ecu data its a vdo ecu do you know what chip i need to read

[smayer]

Read with atention the last posts from Bram and Vanos, you DON'T need Das. Write the repaired dumps in EIS and make new keys, That's all.

[itrade]

Bram is fast, i' slowly :banghead::banghead:

:rock: :rock: :rock:

[keygargoil]

thanks bram i have just been down and used key 6 the car is strting now but when i switch it off and then go to switch it back on the ezs electric lock doesnt come off, when i pull the wire off the back and reconnect it the key will go in the lock comes off and it starts until i switch it off again and the same thing happens any ideas what is wrong

[keygargoil]

bram your message box is full i have tried to reactivate key 5 but it wont i have checked all soldering many times and mcu2 also but the same problem