p307 1.4 hdi 0 281 010 390 immo off ?

[sparkle]

hello friends . i have 2002 p307 1.4 hdi . bosch 0 281 010 390 . 95160 eprom . i have tried another solution from this site but car is in limp . does anyone have a good working immo off solution with no errors . original file attached . thank you friends

sparkle

[sparkle]

can anyone confirm if this is possible ??

sparkle

[gyapi11]

can anyone confirm if this is possible ??

sparkle

Hi. one might help pass pm

[sparkle]

thank you my friend but this file i tried allready and car is in limp . will not rev over 3k .
need a good working solution .

regards

sparkle

[speedy100]

thank you my friend but this file i tried allready and car is in limp . will not rev over 3k .
need a good working solution .

regards

sparkle

When the problem is the immo then the car does not start at all... If it is in limp mode then You have a different problem. Check it with Lexia diagnostics to see the problem.

B.R

[gyapi11]

Hi.recoding injectors. maybe this could be the solution

[sparkle]

has anyone successfully recoded injectors after immo off on these models ?

sparkle

[diagmoh]

Hi Sparkle

take your dump off pass in pm

[speedy100]

Sparkl, it would be good if You post results so everyone learns something...

B.R.

[sparkle]

i am awaiting ecu to return so i can test a 2nd file posted by gyapi11 . all other files posted are identical . car does start with that file but is in limp . fault is in file , not car .

sparkle

[speedy100]

Hi Sparkl,

Did You do what I suggested in my post #5?

B.R.

[maxcombor]

If you dont have eeprom error in diag. You must readapt with pp2000 after immo off and all be fine