View Full Version : PCR2.1
rj22
25th October, 2012, 08:41 PM
Hello
where the point boot mode in the driver Continental SIMOS PCR2.1 5WP42876 AA
through
rappttor
25th October, 2012, 08:57 PM
and you will use what tool to read it?
rj22
25th October, 2012, 09:34 PM
galletto my friend
correcaminos
25th October, 2012, 11:37 PM
galletto my friend
not only one.
100ohm, 1kohm and another 1kohm resistor making bridges between some pads.
xtreem
25th October, 2012, 11:51 PM
galletto my friend
witch galletto? ori iur clone??
xtreem
25th October, 2012, 11:51 PM
galletto my friend
cloque work?
rj22
26th October, 2012, 07:14 AM
work perfect
xtreem
27th October, 2012, 12:23 PM
you have a schematic for this ecu?
schematic and resistores and pinout.
send me please
asman2vw
27th October, 2012, 03:31 PM
I have atached pics and instructions for simos .
I hope it helps
rj22
27th October, 2012, 10:02 PM
just ran out trying to read the ecu
xtreem
27th October, 2012, 11:44 PM
just ran out trying to read the ecu
Can not you read?
this ecu not need wire boot?
what was the diagram that you used to connect?
can l . can H. 12v. gnd. only?
thanks
xtreem
27th October, 2012, 11:45 PM
just ran out trying to read the ecu
wat galletto you have? clone?
my is silver box.
sito
28th October, 2012, 10:07 AM
First of thanks.
I've understood correctly v2 China Galletto:
1 conect the resistors
2 Select Driver
3 Tricore SAK 1796
and read
I will test today
Thanks from Germany
sito
chli1976
28th October, 2012, 10:26 AM
First of thanks.
I've understood correctly v2 China Galletto:
1 conect the resistors
2 Select Driver
3 Tricore SAK 1796
and read
I will test today
Thanks from Germany
sito
Post results
filecloud
28th October, 2012, 10:38 AM
just ran out trying to read the ecu
Please post the files you read out...
pikus_m
28th October, 2012, 11:59 AM
In attechment....
Catalin_TCM
30th October, 2012, 03:28 PM
galletto 2 clone read/write vag 1.6tdi ???
mbtun
30th October, 2012, 05:08 PM
nu citeste desigur
sito
1st November, 2012, 03:23 PM
I tested today but no chance its impossible read by clone
mexanico1971
2nd November, 2012, 02:59 AM
it"s a tc1796 isin"t ?! maybe it"s possible !
sito
2nd November, 2012, 11:33 AM
Who - Wie - como ???????????
possible !!!!
sito
2nd November, 2012, 11:34 AM
and my next problem is Volvo XC60 D4 2.0
inside is EDC 17CP48 impossible to read by Galleto V2
sito
2nd November, 2012, 09:48 PM
My last session with Galletto V2 3 LED
see Pic.
mislav88
2nd November, 2012, 10:46 PM
why are you trying to read PCR with this clone? i advise you to stop trying that unless you want to buy new ecu from dealer, no cheap BDM cloning on used ECU here in case if anything goes wrong.
auto coding
3rd November, 2012, 05:26 PM
My last session with Galletto V2 3 LED
see Pic.
u have problem on making tricore in boot mode....
sito
3rd November, 2012, 07:22 PM
I think the problem ist the Firmware bcause i can read a little. see the pics
asman2vw
3rd November, 2012, 07:30 PM
Are you sure you use the right driver for this ecu ?
09/12Simos PCR2.1 VAG 1.6 TDI Unlock Boot Tool09/12Serial driver Simos PCR2.1 VAG 1.6 TDI
BR
sito
3rd November, 2012, 07:41 PM
I tested by Galletto V2 3LED 0084 - 0103
i think i dont have the Driver, and i have tested
with TOOL PASSWORD TPROT V08 VAG.
thanks
powertdi
3rd November, 2012, 08:44 PM
Ofcourse You havent m8! YOu must be joking for everyone.
Read This ECU Possible only with September 2012 update But you sw is 2011 I sugess.
I saw you have Jtag unlock for reading. Did you tested on Denso? :celtictop::celtictop::celtictop:
javilette
3rd November, 2012, 09:45 PM
this is for read by bdm and obd in the original galletto (i dont khow if posible read and write by obd i dont try) i have one vw caddy for do it but i havent time for this. i try the next week .
J_amb_o
3rd November, 2012, 09:51 PM
OBD possible after unlock in boot. On original tool of course.
powertdi
4th November, 2012, 11:07 AM
NOT Original yet :listen:
javilette
4th November, 2012, 11:13 AM
i dont try yet but you think that dont works galletto original whith this???
powertdi
4th November, 2012, 03:50 PM
I mean not original work also. :proud:
sabahattincin
22nd December, 2012, 05:26 PM
continental simos pcr 2.1
clone FTech galletto2 help me ?
cp2010
22nd December, 2012, 10:24 PM
continental simos pcr 2.1
clone FTech galletto2 help me ?
no,
some people say that is possible with mini galletto but i hear that this not working
only such "trick from seller" ;)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.