PDA

View Full Version : SID801 93C56 XAARA2


GolfmkI
20th November, 2012, 01:21 PM
I have Xaara2 with bsi problems, I want to disable de inmo

System is sid801
5WS40023F-T
9644302380

93C56 inside

I have tried a couple of solutions in forum and dont worked for me.


There are lot of info from SID801A, but mine is sid801

Someone could help me clear please, totally off.

+ Seems have not to cut any cable, as it is can type comm between bsi and ecu......

Any help will be appreciated.
helmi reguig
20th November, 2012, 05:35 PM
I have Xaara2 with bsi problems, I want to disable de inmo

System is sid801
5WS40023F-T
9644302380

93C56 inside

I have tried a couple of solutions in forum and dont worked for me.


There are lot of info from SID801A, but mine is sid801

Someone could help me clear please, totally off.

+ Seems have not to cut any cable, as it is can type comm between bsi and ecu......

Any help will be appreciated.


try this
___________________
pass in pm
GolfmkI
20th November, 2012, 06:42 PM
Thanks for help but dont worked for me.

Have not cut any wire.Must I???

Any other working solution for Sid801??
djamelEZS
20th November, 2012, 06:52 PM
ONLY PUT ORIGINAL EEPROM IN ANY USED ECU IT WORK NOT NEED TO CHANGE ANY THING OR TRY TO COPY LINE WITH IMMO TO TYHE LINE IN THE NEW ECU 100%
volavka
20th November, 2012, 06:55 PM
car do not run more 3000rpm
you have useadaptation with lexia.
so g-luck
GolfmkI
20th November, 2012, 07:00 PM
ONLY PUT ORIGINAL EEPROM IN ANY USED ECU IT WORK NOT NEED TO CHANGE ANY THING OR TRY TO COPY LINE WITH IMMO TO TYHE LINE IN THE NEW ECU 100%

Have not new and uses ecu.

Only have original ecu and want to bypass inmo. Anyway Thanks for help.

Tour method is tipical ejem you simply put an used One. You are simply cloning.

Thanks anyway.
GolfmkI
20th November, 2012, 07:02 PM
car do not run more 3000rpm
you have useadaptation by pp2000.
so g-luck

Thanks I will report results.

I have read that not run over 3000, but no problem..I will recode with lexia.
GolfmkI
21st November, 2012, 01:03 PM
car do not run more 3000rpm
you have useadaptation with lexia.
so g-luck

Dont worked for me. Ecu blocked??

If you are saying this solution work 100%...must be an ecu problem.

Of course I have checked all grounds and 12v....all is ok.....