Golf 5 2.0tdi manifold flap v157

[Mario32]

Hi,

Could some one please help me to remove this error from this dump?
19559 - Motor for Intake Manifold Flap (V157): Malfunction
P3103

I have already changed the manifold flap v157 with new one.
The 10a fuse in the engine bay fuse box was blown and replaced the wiring is double checked.
The fault still remains probably damaged ecu.

Thanks in Advance

[Maartinj]

Error is one, and the move (test flap/work) is a 2nd one.

[Mario32]

Error is one, and the move (test flap/work) is a 2nd one.

When I make actuator test the flap wont move.

[boomeer]

When I make actuator test the flap wont move.

here is dts off
pass i pm
reg
Alex

[Diagnosticated]

Hi,

Could some one please help me to remove this error from this dump?
19559 - Motor for Intake Manifold Flap (V157): Malfunction
P3103

I have already changed the manifold flap v157 with new one.
The 10a fuse in the engine bay fuse box was blown and replaced the wiring is double checked.
The fault still remains probably damaged ecu.

Thanks in Advance
What engine is this?

[Maartinj]

It might be 2.0 BKD 2005

[ecutuners]

Very easy to remove intake flap from this ecu and dtc for it also

[daniersms]

Or replace flap with brand new one ---old one probably full off oil in elect side

[pawliukazz]

Or replace flap with brand new one ---old one probably full off oil in elect side

Hi,

Could some one please help me to remove this error from this dump?
19559 - Motor for Intake Manifold Flap (V157): Malfunction
P3103

I have already changed the manifold flap v157 with new one.
The 10a fuse in the engine bay fuse box was blown and replaced the wiring is double checked.
The fault still remains probably damaged ecu.


.................

[boomeer]

Very easy to remove intake flap from this ecu and dtc for it also

everything is easy! when there is some knowledge!

[Mario32]

everything is easy! when there is some knowledge!


Hi friend,

Today I have test you're solution and it worked perfectly even with connector not plugged the fault code is totally gone.
Thanks fore the helping!

Regards,
Mario.:top:

[DemolitionMan]

pass please?

[sumo.974]

Greeting to boomer, I have the same problem on the car of my wife! I could have the password! thank you

[Diagnosticated]

Greeting to boomer, I have the same problem on the car of my wife! I could have the password! thank you
You could try setting 0DAC3B to 000. That might work.