Hyundai SONATA 2.4L 2011 American origin (not start)

[achaccha]

Dear friends.
I have a Hyundai Sonata 2011, American origin, the vehicle booted perfectly with your keychain key smart card. the client transfer the vehicle to the dealership to add an additional key. During programming the technician probably made ;a mistake and since then the vehicle is immobilized. Today I went to assess the vehicle with my scanner and the TCODE but can not start programming in the pictures you can see the results of the scanner.
Please I need your help to find a solution to this case, in the smart key module can appreciate a micro 9S12.
I will be attentive to your comments and hope to find a solution soon.
Thanks for your help

[achaccha]

Hello friends.
I have read the micro 9S12 the smart key, can anyone help me to start again this vehicle?
that is what can be blocking, so it is not possible porogramar the same key that started the engine.
Thanks for your help

[keygargoil]

have you got the neutralise function on your machine neutralise then programme the keys as there isnt any keys stored also check the fuses for a missing fuse that stops comms

[luis12]

Looks like that system is blocked due to miss code insrted too times, timer is active, and immo are sleeping due to this communication are broken, leave key in for at least one hour and retry...

[achaccha]

Thanks guys for your feedback. my scanner has the function of neutralizing. I'm using Gscan and when entering "ESCL status information" reads:
IMMO KEY Status: TP Virgin
ENABLE: OFF
Status : NORMAL
ESCL BOLT STATUS: FAILURE
ESCL LEARNED STATUS:-
please review my first images.
apparently this vehicle has not ESCL, I searched address blocker but has not been located, just find a module whose image attached hereto.
can someone tell me step by step how I can re-start the engine of this vehicle?
can be used in programming, a key used?
The key to this successful programming, you must be a virgin?
Please if you can help me with the code number of ESCL or an image of this module.
I have understood that you need to have the module installed in the vehicle ESCL to proceed with programming.
Thanks for your help

[KriptoKey]

Hello achaccha.
you checked if the keys you are using for this schedule is a virgin?
Please can say how are you sure that your keys are virgins?
someone on the forum can say as you can see if a key is a virgin?
greetings and good luck.

[cklair]

you may have communcation issue b1613 is set when bcm dont see clu ,smk,sjb.check your power and ground. if car is from body shop check the area where repair was done.do the network test see what moduals pings on data line

[achaccha]

Thanks all for your comments, CAN communication is perfect, I am buying and importing the key blank from the dealer in the U.S., must reach these days.
A friend of USA, tells me that if no ESCL module, programming key is not possible, I want to know if that's true, the friend does not explain why it will not be possible to program the key without ESCL module. this car never the module ESCL install , I checked the parts catalog with the VIN number, the vehicle has been manufactured without module assembly ESCL.
Can someone please clear this doubt?
Also as Kriptokey friend says, as will be verified if the key is a virgin?
Thanks for your help

[achaccha]

how are you my friend
Yesterday I went to the Hyundai Sonata.
the client has brought a blank key purchased in the U.S..
I followed the programming procedure.
but at some point I get a message that says:
smart Key code saving.
now, ESCL teaching.........
please, wait!
and then get another message saying:
Vehicle S/W Management
Test Failure !!!
Press (OK) button
I need your help friend.
this vehicle has no ESCL, but he seems to need its temporary installation in the vehicle to proceed with the programming of the key. can anyone help me here?
I searched the ESCL module in the vehicle, but found even this connector to ESCL.

[KriptoKey]

Hello achaccha.
I think it is not necessary to ESCL module. double check your connections and try to program a new key. follow the steps attached
good luck

[addgsm]

hi bro did ur problem solved?

[Pete42]

Hi I'm working 2011 genesis getting same message (escl learned status:-?)did you ever find hyundai or any help appreciated there's no escl in car and no plug for it ?