kuti
7th January, 2013, 05:01 PM
Hi
Just starting my experience with galletto.
How to enter boot mode of proc. (using galetto correct sequence)
I try read ME7.9.5 (C1) do it like tihs:
1) connect like in pic pin 4 pcb to gnd and 6 to 13. (with 1K resistor)
2) power supply to ecu.
3) disconnect both (6 with 13) and 4 form gnd
4) read file
and got error.
any idea ?
Just starting my experience with galletto.
How to enter boot mode of proc. (using galetto correct sequence)
I try read ME7.9.5 (C1) do it like tihs:
1) connect like in pic pin 4 pcb to gnd and 6 to 13. (with 1K resistor)
2) power supply to ecu.
3) disconnect both (6 with 13) and 4 form gnd
4) read file
and got error.
any idea ?