acid stearinicum, for silicom hybrid ecu clean

[mexanico1971]

hi !
does anyone know here to get this ?!

acid stearinicum

like this one on the video !

VW Audi Bosch motronic 5.3 ABS repairing - YouTube (http://www.youtube.com/watch?feature=endscreen&v=UqtowdSDbxU&NR=1)

thank"s in advance

BR

[arvedo]

just scrape and find copper and solder a new thread is much easier, do not waste time searching the acid, I have and it is not good solution

[quinnd]

I agree, the amount of time and mucking around in that area with his soldering iron he is lucky not to damage the wheel speed sensor wires. I make connection on that main earth and run around side of board to caps on right hand side

[mexanico1971]

ok !
s? what is the solution ?!

[quinnd]

ok !
s? what is the solution ?!

Use ordinary solder, scrape away silicon from brass pad, sometimes I remove the two alloy wires completely. I twist two copper strands together, solder to brass pad, then run around the back of the board to the to SMD caps on the right hand side. The outher edge of both is ground, connect copper wire to there. I have done over 100 this way with no probs

[mexanico1971]

thank"s I will try !
regard"s