PDA

View Full Version : 2012 ford edge airbag crash clear



ctype02
11th March, 2013, 05:38 PM
need to clear airbag crash


2012 ford edge
chip: Infineon XC2361
CT43-14B321-AC


thank,
chin

satellitedream
12th March, 2013, 04:04 AM
after loading bin, must clear codes with scanner on bench or in car

ctype02
20th March, 2013, 03:55 AM
Didnt work, has no code but light is still on, any one else have any tested solution??

satellitedream
20th March, 2013, 03:59 AM
did you clear codes from OCM(occupancy module) also stores crash but can be cleared by scanner

ctype02
20th March, 2013, 04:07 AM
Which tool are ppl using on this newer ford cars, i think my.scan tool is throwing wrong codes prob,

satellitedream
20th March, 2013, 04:13 AM
I am using original ford scan tool VCM with IDS 83.03. My solution is tested. When you use aftermarket scan tool and scan, make sure you go into both RCM and OCM. These are two seperate modules and both must have no codes for light to be off. All newer fords store B1231 in OCM module and until you clear that with scanner then light will not shut off.

Let me know what codes you have in OCM module....

ctype02
20th March, 2013, 05:02 AM
Thank. U Boss, will let u know tomm

AMLGAR
20th March, 2013, 05:52 AM
ford xc2060N AND XC2361 .. STORAGE CRASH IN 3 AREAS...SO YOU MOST CLEAR THEM.:wink:

tristancj
31st May, 2013, 09:54 PM
I have the same module , Please you send me the pass. 2012 ford edge
chip: Infineon XC2361
CT43-14B321-AC
Thanks

Zeittt
31st May, 2013, 11:42 PM
Post your dump here to someone help you

impolis
20th September, 2013, 07:31 AM
hi i have LIncoln MKX (FORD EDGE) airbag module with crash 220351
Maybe someone can help.

Thanks

brchip
25th April, 2014, 04:07 PM
Hello,

I have same ECU to clear. What is the best tool to read this Infineon chip?

LUIGUI85
7th January, 2018, 12:55 AM
after loading bin, must clear codes with scanner on bench or in car
hi can u give me the pass pls?

radugcr
21st February, 2018, 12:43 AM
Help please to clear crash data in Ford Transit BK2T-14B321-AE, mcu XC2361A-72F.

https://drive.google.com/drive/folders/1LuaMv1iDSYlsYLpUV0xzGxtcdTqc575a?usp=sharing (https://drive.google.com/drive/folders/1LuaMv1iDSYlsYLpUV0xzGxtcdTqc575a?usp=sharing)

Thank you very much!

autorebuilder
21st February, 2018, 01:47 AM
You can't use someone else file for your vehicle, It will not work. The Module will have U3000 code. You need to upload your original file from your vehicle.

janushaan
21st February, 2018, 04:18 AM
clear your pm can't send you message