Citroen C3 1.4 HDI 16V ecu Delphi DDCR R0411C001F immo off or virgin

[dmdany]

Hello!
I need solution VIRGIN (after program with lexia) or IMMO OFF for ECU
C3 14HDI 16V DDCR Delphi R0411C001F 9647563180.
I read micro and eeprom 95160.
Can you help me?
I attachaments my dump original.
Very regards

[dmdany]

help please.... : Blu:

[dmdany]

please help me friends

[alclot]

Hi mate. Did you find solution?
Thanks in advance ;)

[sep382]

hi guys
Did you find solution?

i have the same problem as dmdany

C3 14HDI 16V DDCR Delphi R0411C001F 9647563180

[peko]

hi friends

i have same probleme

have you found solution ?

thanks

[peko]

Hello!
I need solution VIRGIN (after program with lexia) or IMMO OFF for ECU
C3 14HDI 16V DDCR Delphi R0411C001F 9647563180.
I read micro and eeprom 95160.
Can you help me?
I attachaments my dump original.
Very regards


have you PIN code from this ECU ?

[Abdel0762781]

Hi no immo for this Ecu i give you the solution unsolder the eprom and solder in another ecu and write the inj codes for your car to accelerate , good luck

[Abdel0762781]

Its you cant desolder epr tried this virgin file but you have to cpde the injectors with lexia i awaiting your return

[Abdel0762781]

909423909423

[peko]

Hi no immo for this Ecu i give you the solution unsolder the eprom and solder in another ecu and write the inj codes for your car to accelerate , good luck

I not understand your solution

My problem is : ecu go here with engine not starting because eeprom from ecu are empty ( full FF inside 95160 )

So you mean I can write your eeprom in my ecu ( same sw hw ) and just code injectors ? And key

Thanks

[Abdel0762781]

here you have understood write my eprom and codes the injectors and start the car the key will synchronize from bsi no need to program a new key and give your feedback

[peko]

thanks for your help

after write virgin, the cooling fan turn on and engine not start

[Abdel0762781]

Hi Can you show me the diagnostic fault codes