car prog original out of oder

[newgeniehex]

hello
the support carprog is in holliday since 5 august 2013:blue:
my car prog work but i have a error when i have make a test
i have change the 74hc125x4 and it don't work normamli if i try to read a mcu mottoralla for dash c5 2005
i have error short circuit
i need identification of this resistor
look my picture regard
many thank in advance

[autoenthu]

Did you try to update, just try again and again, may be will sort out itself

[RCS]

here is the pic from the original carprog and value of the missing resistor...
i hope it will help you...

213409

[serg2000]

must be 2.2 OHm

[serg2000]

when doing the test adapter you need to use an adapter A9 A9 - CarProg Hardware Test adapter (http://www.codecard.lt/carprog/adapters/a9-carprog-hardware-test-adapter/prod_289.html)

[newgeniehex]

HELLO
thank to all
i will report
regard

[kidloco]

you can solder it with normal wire no need 2.2 ohm resistor...

[RCS]

i am just looking at your board...
what about this capacitor, it is not present on the picture you posted?

213458

[newgeniehex]

hello
you are right!
but i have only remove the resisitor 2.2 hom
in my original carprog it dont have this capactitor
regard