Crash 285589834R Scenic III problem. PLease help!

[marmaro]

Hi ! I,m trying to repair controller renault continental 285589834R with carprog ,but have some problem . Im looking for eeprom 95640.
I wanted to connect to the PCB but i have another PCB than in the manual carprog, opened controler but the memory is probably on the other side. Maybe someone knows how to connect that sensor, or pull out the board without damage?218906218905218912

[sergei5005]

You probe connect from CARprog A4 adapter directly over eproms pin??? Pin 1-white wire, pin 2- yellow wire,.... Or remove eprom and read with other programmer (willem for example)

[marmaro]

You probe connect from CARprog A4 adapter directly over eproms pin??? Pin 1-white wire, pin 2- yellow wire,.... Or remove eprom and read with other programmer (willem for example)
THanks sergei5005 (http://www.digital-kaos.co.uk/forums/members/347834-sergei5005/) for reply!
I now how read this eprom but have problem with remove board from pins, it sitting very hard ; and memory is on another side .
Maybe somebody has tested way to exrtact PCB of these pins? PLEASE
I was stuck in deadlock:blue:

[marmaro]

Problem solved - I made a special tool to pull the plate. THaNKS

[sergei5005]

Yesterday Im upload others continental module from renault fluence With images 95640 eprom location. Yes . another side eprom. Hard sitting location.

http://www.digital-kaos.co.uk/forums/f170/renault-fluence-continental-285588143r-never-crash-all-367384/