MGcamd softcam & keys

[satlover276]

Hi everyone, I must apologise for asking for help again... I have been trying to find out how to ftp the MGcamd to my receiver then add the keys I need in order to view the Greek Digea TV channels on 9e but I have really struggled and although trying so hard to learn for myself I would really appreciate anyone PM'ing me to offer some help as I really need some guidance but once I get to know what to do it would be a breeze to repeat. If anyone could help it would make my day as I have elderly relatives that would be happy if I could get these channels to work for them... and me too! Thank you. :joyous:

[blueflash234]

what box do you have and what image, you should be able to download mgcamd from the server and there will be a plugin for the keys then you just download when you need them

[satlover276]

Hi blueflash234, thank you for your reply which I appreciate. I have an Xtrend ET9200 receiver and using the openpli 2.1 image (the version before the 3.0) but am unable to download MGcamd directly via the image for some reason and having searched cannot find the correct plugin I need for the keys also...

[blueflash234]

i have the same receiver m8 your using an old image i was using the open pli 3 and have just put xtrend alliance image on when i get home i will have a look m8 i work away from home so will be the weekend before i get a chance.you could also ftp tunsia sat plugin ftp it to tmp folder and install it ,on your image go to plugins and download i think more plugins or i think press green button something like that, when thats downloaded you should get softcams and you should be able to download from there

[skybandit]

I too have been struggling for some time to get MGcamd working and am frustrated at the number of available versions of this program. I don't now if a specific version of MGcamd is required for Enigma 2 running Blackhole 2.0.5 which is the combination I'm using at the moment.

I don't know how to tell whether MGcamd is installed correctly or whether it is connecting to a server.

Any help would be appreciated.

[happy_highlander]

All the cams that are installed are in the blue panel on Blackhole. All the info needed to work bh is almost always given with the download link

[skybandit]

I may have it installed, but how can I tell if it is attempting to connect with the server?

Is there a log file I can check?

Where is the download link you mention?

[satlover276]

thank you blueflash234 it would be most helpful if you were able to help or feed back over the weekend when you are free. thank you.

[happy_highlander]

I may have it installed, but how can I tell if it is attempting to connect with the server?

Is there a log file I can check?

Where is the download link you mention?

The download link is wherever you downloaded the image from. There is usually a full button map in whatever thread you got the list from that explains what options are in what panel. If the channels clear it is connecting and you will see the ecm info and the likes by pressing the Blue button (Blue panel)

[P&D]

I too have been struggling for some time to get MGcamd working and am frustrated at the number of available versions of this program. I don't now if a specific version of MGcamd is required for Enigma 2 running Blackhole 2.0.5 which is the combination I'm using at the moment.

I don't know how to tell whether MGcamd is installed correctly or whether it is connecting to a server.

Any help would be appreciated.
check this link mate helped me loads.....http://www.digital-kaos.co.uk/forums/f191/softcams-371508/#post2106021

as for the file you need...MG**** 1.38c E2

install via ftp...temp folder....then install via the menu
press the blue button on the remote...then press sideways till you see the file name then press ok to activate it.......

[cactikid]

wonder what the difference of that one and 1.35 is,so many changes?

[P&D]

Hi cactikid

I could not open channels with 1.35 so updated to 1.38 picture back channels open again ;)

[mdt]

1.38c serves no purpose now as jsc have change rom. 1.37/1.38 was introduced for viaccess 22610 provider ect and you need a patched version of 1.35 to clear B*****,regards mdt

[digicon]

As MDT rightly points out to get Bulsat you need the patched 1.35a version although most would use 1.38 which is all that is required now anyway

[skybandit]

as for the file you need...MG**** 1.38c E2



I read somewhere that I should be able to download and install MG**** from the add ons menu,
but I can't find it.

Is there a recommended place from which to download MG****? Preferably as an installable package.

[digicon]

I read somewhere that I should be able to download and install MG**** from the add ons menu,
but I can't find it.

Is there a recommended place from which to download MG****? Preferably as an installable package.


I can tell you now that Blackhole do not and have not carried Cams on there download servers for the best part of the last 3 years, you will have to source these seperately.

Do a search on the forum for Benny/9 as they may have slipped through the net so to speak

[skybandit]

The download link is wherever you downloaded the image from. There is usually a full button map in whatever thread you got the list from that explains what options are in what panel. If the channels clear it is connecting and you will see the ecm info and the likes by pressing the Blue button (Blue panel)

I have never heard of ecm info... What does it look like? Is there a screenshot I can see?

[skybandit]

I can tell you now that Blackhole do not and have not carried Cams on there download servers for the best part of the last 3 years, you will have to source these seperately.



Is there an official maintainer/source for downloading MG****?

[happy_highlander]

I have never heard of ecm info... What does it look like? Is there a screenshot I can see?

No need for screen shot, short press Blue button and you will see the Blue panel which contains the installed cams use the arrows either side of the ok button on remote to scroll through the cams installed. If you have a cam installed and setup properly you will see the ecm times (the lower the better) on that screen which will confirm you are connected and scrambled channels will clear (you will need to be on a scrambled channel before you press the Blue button) as cams do not connect or show as connected when viewing fta

[skybandit]

It says Ecm Info not available

There are 3 CAMs installed Mg 1.35a being the default.

I guess this means it isn't set up properly....

[happy_highlander]

Yes but you will need a softcam key or the unmentionable to clear scrambled channel

[blueflash234]

cant find the keys plugin satlover276 i am using the alliance image its not to bad i think open pli is the same go to plugins when it open press the green button when it downloads scroll down to softcams open and download the one you require

[satlover276]

I tried that but when I select the version of MGcamd I want to download it says there is an error. I think it's because i'm using the openpli 2.1 version. I think i'll just give up as I've tried to find out for myself but haven't been able to. have had to start a second job so haven't got as much time to learn as I once did i'm afraid.

[blueflash234]

why dont you try a newer image ,try a few and see what you like