Rover 214 SI 1.4 16V immo

[tomo776]

Hi i have trouble with this car wont start i dont have injectors signal.
I try immo off with immo killer and dont work.
If anybody have working immo off please send.
And do i have to cut all wires from immo box or just make short with white black and gnd.
THANX
Here is my dump
Car is 95 year
ECU: M E M S MKC103020
EPROM 93C46

222561

[kitioni]

try and report

[tomo776]

Hi thanx for answer but car dont work its same as i have file i try but injectors dont work
car have have spark but injectors don open

[simaservis1108]

Here you go,try it.
222596

[tomo776]

Car vont start again and this is same file like my org.
I cut pin 13 on ecu and make on immo box conection to gnd
Car have spark and fuel pump work ok.
Do i have to make any conection on immo box

THANX for raplay

[tomo776]

Where is location of immo box at this car a have found this its near fuze box
in centre console i can find immo box like its on manual
Is there another soultion for cut nad conect on this like in picture223176

[tomo776]

Is there any other solutuon for this car i dont find immo box
just this for central lock.
What i need to cut from this i dont have injector signal
i try with this dumps
cut pin 13 on ecu but always same injector dont work
if anybody have solution please give some advice for that car