View Full Version : Peugeot 207 Bsi VALEO eeprom 25128 virgun dump needed
gejzaslapka
14th October, 2013, 08:18 PM
Hello friends,
does anybody have virgin dump for this BSI please
it is valeo BSI 2004 P08 - 00 made in 2008 year
i need it because i read it with upa as 25c128 (probably damaged dump) then i write back to bsi changed mileage and then car not start anymore
when i reconfigure it with planet, car is working until i leave it off for more than 10 min. off After this time is all confuguration lost and car cannot start again
224623
Thanks to all
GS
Zaveruha
15th October, 2013, 09:40 AM
I think your dump is good, but if you want to make it virgin you should put all FF.
gejzaslapka
15th October, 2013, 07:02 PM
with this dump car not start, planet diagnostic cannot read VIN and BSI is not configured, but when i configure it again configuration is not saved so something in this dump gone wrong :blue:
tomorrow i try erase whole memory with FF
gejzaslapka
17th October, 2013, 06:54 PM
You are absolutelly right, filling whole memory with FF and after configuration car is working again
Thank You
mcgywer
11th December, 2013, 12:39 PM
Hi,
need pin code for Peugeot 207 25C128
Thanks in advanced
Mat
gepakg
11th December, 2013, 12:45 PM
J2J8 or 8J2J
regards Gepa
Hi,
need pin code for Peugeot 207 25C128
Thanks in advanced
Mat
mcgywer
11th December, 2013, 12:48 PM
Also need pin for original bsi for that car
gepakg
11th December, 2013, 01:35 PM
BXC4 or 4CXB
regards Gepa
Also need pin for original bsi for that car
mcgywer
14th December, 2013, 01:21 PM
Hi,
try to change BSI in Peugeot 207 2007 year. Dump from original BSI above - bsi org.
Fill BSI with all FF.
Program BSI with diag box but can't add key - old one or new one.
Any idea how to program that type of BSI?
Regards
Mat
leowii
14th December, 2013, 04:46 PM
Hi,
try to change BSI in Peugeot 207 2007 year. Dump from original BSI above - bsi org.
Fill BSI with all FF.
Program BSI with diag box but can't add key - old one or new one.
Any idea how to program that type of BSI?
Regards
Mat
Have you the original car code? Is that code the present code in BSI, check whith diag box, If no, erase line 00BB0h from bsi dump, add original CODE whith diag box, program keys....
mcgywer
16th December, 2013, 08:35 AM
Can someone check pin code from that BSI peugeot 207 with 95128?
Mat
darwins
17th December, 2013, 10:10 AM
Can someone check pin code from that BSI peugeot 207 with 95128?
Chassis VF3WC8HZC33796659
Pin: 9CLC
This has the same pin as another file on the forum :)
javiere
30th January, 2014, 11:01 PM
I think your dump is good, but if you want to make it virgin you should put all FF.
hello.
I also wanted to put a virgin.
could tell me where in the file must be put in FF?
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.