View Full Version : Digiprog3 EEPROM clip.
paulocallaghan
17th October, 2013, 12:21 PM
Any of ye guys know where I cud get hold of an EEPROM clip and lead for a digiprog3. Or do any of ye guys know the wiring diagram for the 25 pin serial socket to the EEPROM clip .thanks guys
CARPARTS
17th October, 2013, 12:40 PM
POMONA make those eeprom clips, or 3M.
starkey
17th October, 2013, 01:25 PM
hello friend your machine works well? I have problems with reading epron 93c46
225084225087225088
motorsport
17th October, 2013, 02:58 PM
You have remove lcd why you not unsolder directly eeprom?
PremierD
17th October, 2013, 03:02 PM
Too much like hard work ... lol or incapable who knows
PremierD
17th October, 2013, 03:09 PM
hello friend your machine works well? I have problems with reading epron 93c46
225084225087225088
You will have mate if you are trying to read the dash you have hooked up .. because it will be a C56 or C66 .. not a c46 and they very seldom read incircuit anyway :)
paulocallaghan
17th October, 2013, 11:03 PM
Guys I just need to know which pins of the 24 pin socket I need to connect to the eeprom clip
diagtech
17th October, 2013, 11:11 PM
Why desolder screen then not eeprom and dont think digi is good with these anyway
carbandit
18th October, 2013, 12:10 AM
Guys I just need to know which pins of the 24 pin socket I need to connect to the eeprom clip
ST 1 soic clip
1 --------- 1
2 --------- 2
3 ------- 3
4 ------- 4
19 -------- 5
6 --------- 6
5 -------- 7
7 --------- 8
TULGEYWOODMAN
20th March, 2014, 05:51 PM
hello u know which one is the first point of cable
Baloody hell Rodney.....................
XmoDDeR
20th March, 2014, 05:56 PM
hey tulgey check email
XmoDDeR
27th January, 2015, 08:23 PM
anyone have issues reading incircuit with digiprog3 ie wrong mileage and other issues ? mine works great but a few of my friends always contact me and say they have issues...............time to take this to the lab
antibisic
28th January, 2015, 09:46 AM
anyone have issues reading incircuit with digiprog3 ie wrong mileage and other issues ? mine works great but a few of my friends always contact me and say they have issues...............time to take this to the lab
I have problem with 35080 sometimes,I solder eprom direct on the board for eproms but sometimes read bullshit ,sometimes nothing and sometimes good,resolder adapter but same
kumistheru
28th January, 2015, 03:24 PM
Any of ye guys know where I cud get hold of an EEPROM clip and lead for a digiprog3. Or do any of ye guys know the wiring diagram for the 25 pin serial socket to the EEPROM clip .thanks guys
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=296906&stc=1
Use this eeprom adapter with digiprog. It is easier than ST01/02 Cable came with digiprog. You can just plug DIP8 or SOIC8 clip directly on to the pin header for in-circuit or out of the board.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.