VW Phaeton 3D09200 880J 5W8 - Need working bin from i2C 24C08 to test

[anda2003]

Hallo
I have problem with tacho which make many noise on CAN Line ( maybe need a replace tacho )
without tacho engine work perfekt and also other modules but after connect Tacho engine works bad and many
problems with CAN comunications to other modules so i wanna to check other working BIN ( maybe a lose some data )
but i can't found - can anybody help ? VW Phaeton 2004 Year with Engine AYT 3.2L V6 and Tacho 3D09200 880J 5W8 - i2C 24C08

Greetings

[markony79]

this car -I think - is not on CAN Line, its use K-line
check the coding in dash for car? , 6 or 8 cylindar

[yugo45]

this car -I think - is not on CAN Line, its use K-line
check the coding in dash for car? , 6 or 8 cylindar
100% correct.
If it says Can communication , that dose not mean it is Can.
This car is K-line , but communication between modules are via CAN-H and CAN-L and that why you get code Can Communication .

[anda2003]

On Engine ECU and other modules like ABS are a lot's of DTC errors - CAN problems comunication but when I disconect dashboard come back to live modules - I check IC CAN on the PCB and its 100% ok i thinks problem is in the EEPROM Data or uProcessor have problems
that why I wanna to check eeprom data before I buy other dashboard ( there are Codding 031111 )

[anda2003]

this problem are solved. a few bytes in the EEPROM dashboard were damaged.
I found this place and is working well now.
greetings