********KD900 remote generator********

[paul_12345]

For what its worth, back in September posting #500 I tried a few until I found the right one for a 2009 Peugeot 207CC.
I used the same remote changing the firmware each time, but used the original flip remote as the first key each time.
I programmed it with an AD100Pro which erases any existing keys, but don't know how this differs from other programmers.

yes that could be the key thing... because maybe the car recognises the first key in the ignition so instead of erasing and programming with the data from the key, it uses the data it already has.

and on the second key it has already deleted the data so gets it from the key.

unless keydiy are wrong and it does not matter?

[gokey]

try make key
but appear this
some idea ?

[foxtec800]

I usually see that if the cable isn`t plugged in properly to my kd300, needs to be fully in.

[jimmykey]

try make key
but appear this
some idea ?

MOSTLY IS THE CALBE CONNECT ISSURE
TRY TO CHANGE A CABLE TO REMOTES.
AND ALSO SOMETIMES IF THE BATTERY TOO LOW
ALSO COME THIS'

WE ARE TRYING TO CHANGE THE TIPS

[autoTkey]

So this URG200 tool will work like KD900(support all remotes) but you will be able to buy it from anywhere, not only from dealers?
And all other tools(KD200, KD300) will be stopped from production? Can anyone confirm that?

[nazz2]

has anyone done denso Rav4 2xbotton remote?

[doolittle]

has anyone done denso Rav4 2xbotton remote?

Ive used it on the toyota Previa and its worked

[keyprogramming]

Programmed a new NB11 (PSA Style) into a 2005 Citroen C2, original 2B flip(dead, so effectively a no keys job)
Tried 206/207/C2 on the off chance it might work.
Engine started, but no RCL which would make sense as this is for earlier fixed blade C2.
Removed battery, reprogrammed same board as 2B ASK 0536, fitted battery, reprogrammed it, and it worked a treat, well impressed.
Customer well impressed with new style PSA remote, even through it didn't have a badge.
Forgot to mention, the circuitboard on these new PSA as so much easier to take in and out, compared to previous models

[DottoreBL]

Where to buy that new PSA remotes ?

[keyprogramming]

Where to buy that new PSA remotes ?
http://www.tradelocks.co.uk/keydiy-remotes-blades/keydiy-remotes/integrated-chip-remotes.html

[keyprogramming]

Anyone tried updating their KD900 yesterday or today.
Tried a few times yesterday, and again this morning, same problem.
Progress bar for updating Handheld Device goes up to 97%, stops for 15 seconds and then message appears "Internet is slow now, please try later"
Never had a problem updating before.

[Atex31]

Same problem,

Running 150Mb download speed so it's definitely not my end ;)

[keyprogramming]

Same problem,

Running 150Mb download speed so it's definitely not my end ;)
Thanks for confirming it's not just me that's affected.

[paul_12345]

Anyone tried updating their KD900 yesterday or today.
Tried a few times yesterday, and again this morning, same problem.
Progress bar for updating Handheld Device goes up to 97%, stops for 15 seconds and then message appears "Internet is slow now, please try later"
Never had a problem updating before.

This has happened quite a few times for me, where it updates most then fails leaving it saying there is 1 that needs updating.

[garagetech]

Will the kd do audi a8 4e 2005 remotes?

[autochei]

it s some remote like touareg someone say here can do it
but i ask u why use kd when in china it s 18 $ ori key?

[mikajna]

it s some remote like touareg someone say here can do it
but i ask u why use kd when in china it s 18 $ ori key?

That is not ori key mate, that is also china remote ori is far a way, but Im guarantee that is Keydiy remote better than other remotes made by china, second thing its not just for Touareg but is universal for other 7946 like renault, audi, fiat...and it cant be locked.

[autochei]

if u say................................

[tomasete]

Hello, are you planning to develop remote for Audi a4 2003 8z0837231d? Or is there a variant that can be used ?
Tried all of them no success

[Atex31]

......................................

[jimmykey]

aodi A4 CAN NOT BE GENERATED BY KD
ITS HARDWARE VERY ACCUATE.
WE HAVE IT FULL ALGO
BUT KD HARDWAER CAN NOT MAKE IT FOR AUDI A4

[cjawahir]

This has happened quite a few times for me, where it updates most then fails leaving it saying there is 1 that needs updating.

yes same problem .

cj

[keyprogramming]

yes same problem .

cj
This problem only appears to be affecting the KD900, as my KD200 updates OK.
Indicates that 43 updates are required, gets to 97%, waits for a few seconds, indicates SUCCESS, but 43 updates still needed.
Maybe it will get sorted after the holidays are over.

[cumbriaauto]

Does anyone know whether the KD900 can do a remote for the Focus 2006? It's just the old tibbe horseshoe type. There is a Mondeo fob listed in the app, but don't know whether this'll do the Focus - I wish the images on the apps list were a bit more meaningful!

Don't know how to search this thread, so apologies if this question is in here already!

Thanks

[keyprogramming]

Does anyone know whether the KD900 can do a remote for the Focus 2006? It's just the old tibbe horseshoe type. There is a Mondeo fob listed in the app, but don't know whether this'll do the Focus - I wish the images on the apps list were a bit more meaningful!

Don't know how to search this thread, so apologies if this question is in here already!

Thanks
Try this
357630

[keyprogramming]

2010 Peugeot Partner 3B flip remote, original sticker JCAE ED15 633345.
Successfully programmed using 408 0536 FSK.
All 3 buttons inc middle one for back and side doors only all working OK
Big saving on original price of around ?65.00
Thought I had an intermittent remote problem, RCL worked, then didn't.
Realised that if you press the buttons quickly it doesn't always work, but if you keep pressed for at least 1 second, works every time

[cumbriaauto]

Try this
357630
Thanks, yeah I saw that, just wondering if anyone knows whether it will work for focus. I was going to try this and take a genuine along in case the kd fob fails, but if the chip goes in, and the kd remote fails, it means a wasted token or having to swap the chip in the original. Need to know it'll work before programming the kd chip.

Sent from my Harrier from EE using Tapatalk

[keyprogramming]

Thanks, yeah I saw that, just wondering if anyone knows whether it will work for focus. I was going to try this and take a genuine along in case the kd fob fails, but if the chip goes in, and the kd remote fails, it means a wasted token or having to swap the chip in the original. Need to know it'll work before programming the kd chip.

Sent from my Harrier from EE using Tapatalk
Ford remotes are pretty much the same and not model specific, programming is mostly manual.
Cycle a key between ignition on and one click back 4 times and you should hear a chime.
Press any button on all remotes present and you should get a confirmation chime with each one that is accepted

[doolittle]

2010 Peugeot Partner 3B flip remote, original sticker JCAE ED15 633345.
Successfully programmed using 408 0536 FSK.
All 3 buttons inc middle one for back and side doors only all working OK
Big saving on original price of around ?65.00
Thought I had an intermittent remote problem, RCL worked, then didn't.
Realised that if you press the buttons quickly it doesn't always work, but if you keep pressed for at least 1 second, works every time

Does anyone know are the citreon berlingo remotes and partner remotes interchangeable?

[jimmykey]

Does anyone know are the citreon berlingo remotes and partner remotes interchangeable?


kd900 can renew NB SERIES KD REMOTES
IT ALSO WORK FOR ALL PSA

[Fallen]

I have seen a long and a short HU92 blade.
The longer version works for Range Rover Vogue but I can't track them down any more.
Anybody got a link for them?

Thanks

[keyprogramming]

This problem only appears to be affecting the KD900, as my KD200 updates OK.
Indicates that 43 updates are required, gets to 97%, waits for a few seconds, indicates SUCCESS, but 43 updates still needed.
Maybe it will get sorted after the holidays are over.
Tried again this morning on the KD900, still the same but now indicates 42 updates.
Can someone try updating theirs to see if they get the same.
Thanks

[triak88]

HI,

Yes I have the same 42 updates.

[keyprogramming]

HI,

Yes I have the same 42 updates.
Thanks for confirming.

Jimmy, can you look into this problem.
Thanks

[jimmykey]

next week will resoonve
this 42 can not update to device
they must work online
so it is the mistake reportt by soft

thanks for response

those days updated many toyota for 2015 new cars

pls share

thanks

[Atex31]

Mine updated on Thursday and none left over needing updates.

[keyprogramming]

Mine updated on Thursday and none left over needing updates.
Is that your KD200 or KD900?

[totalkey]

It doesn't matter what machine, now is update without machine connected

[Atex31]

Is that your KD200 or KD900?
Both the KD900 and KD200 are all clear now.

[Weasel3]

KD team.
Any chance to make a transition table from KD blades to the more famous ones. PDF, App or lookup database. Search both ways. vice/versa.

Jimmykey:
i understand it .
it is really very important.

_________________________________________

Any progress on this request?
Maybe just a PDF at the moment.

[Atex31]

It still needs an option on the interface to click and show a choice of 433Mhz or 315Mhz.

[robert81]

is it possible to make a key for nissan navara / micra k12?
i can see 2 keys on laptop software but they seem to be a non transponder ones. the one i need is 7946 id46
Thanks

[coolsoda]

It does have you need to check/change the pages in hitag to make sure they are correct and use the ATT-46 key

If you dont have this machine you can replace the PCF7946 on a used remote and fill in hitag pages with Zedbull

361112

[robert81]

havent seen this option in my kd. i need to update it.
another question - nb11 remote i have problems generating them . kd900 says nxp commu error (tested on few fobs not only 1)
ive been generating them ob but have problem since early this week. anyone with similar problem and solution?

also which position should i choose to generate key for 2005 peugeot 407.
Thanks

[gokey]

someone generate successfully remote to peugeot 107 ?

[ninja123]

107 works perfectly

[gokey]

used toyota programing procedure ?

[coolsoda]

Looking to do a vauxhall combo 2009
,Siemens VDO
13.213.488 flip key



361879
Is the Corsa C option suitable

[keyprogramming]

Looking to do a vauxhall combo 2009
,Siemens VDO
13.213.488
Is the Corsa C option suitable
Did a 2006 Combo a couple of days ago, worked a treat
Cover the following
VAUXHALL COMBO XC 02 > 08
VAUXHALL COMBO XC 02 > 09
VAUXHALL CORSA C 01 > 07
VAUXHALL CORSA C 01 > 07
VAUXHALL MERIVA A > 09
VAUXHALL MERIVA A > 09
VAUXHALL TIGRA B 04 >
VAUXHALL TIGRA B 04 >
works on holden barina 2003 thru zed full from australiaMeriva A 2003 remote ok


WORKS ON 2004 XC BARINS FROM AUSTRALIA

[Atex31]

Looking to do a vauxhall combo 2009
,Siemens VDO
13.213.488
Is the Corsa C option suitable


Like Keyprogramming says, the Corsa C option works well,

We sell them as a flip upgrade for the Corsa as the originals are very expensive for a 15 year old car.

One of our vans has used one for a few years without a problem too.

[coolsoda]

It States to 2009,what about 2009-2011

[keyprogramming]

It States to 2009,what about 2009-2011
2009-2012 used the integrated non flip 2 button remote, but I've programmed a normal Corsa-C key/remote to a 2010 Combo, so no reason why the KEYDIY Combo shouldn't work just as well.

[coolsoda]

Tried to do a BFT Mitto Gate entry remote, but it does not support
read as hcs30x

From KeyDiy website
" Covers most anti-theft and rolling code garage transmitters. It is the only device in the world which incorporates the vehicle central locking and garage transmitter functions into one unit."

[PremierD]

" Covers most anti-theft and rolling code garage transmitters.:)

Your'e just lucky I guess lol

[coolsoda]

" Covers most anti-theft and rolling code garage transmitters.:)

Your'e just lucky I guess lol

In china this means between 1% and 99%
they also claim the KD900 covers 80% of remotes
dont get me wrong its a great device but the claims of 80% are cukoo land

They cover 485 remotes,282 if its just 433mhz,if i could be bothered i could state 485 remotes that are not covered

[H.Wessel]

anybody tried touareg with kd remote????

[DottoreBL]

anybody tried touareg with kd remote????

i did, remote work, but buttons doing wrong

[jimmykey]

In china this means between 1% and 99%
they also claim the KD900 covers 80% of remotes
dont get me wrong its a great device but the claims of 80% are cukoo land

They cover 485 remotes,282 if its just 433mhz,if i could be bothered i could state 485 remotes that are not covered


80% for comon keys. not for the smart keys

let me explain why 80%

KD CAN cover 1995-2015 all toyota , honda nissan kia hyundai mazda subura (not include smart)
almost all 1995-2015 vw ford (only mqb not support) ， 70% AUDI （even 2016 TT and A3)
cover 1998-2016 all PSA , 90% buick and chevelot (for 2016 new cars all support well)
and almost all china local cars.

please go to google play or apple store try to search MOBILE KD or KD900 to downlod the APP to see the list.

i must say , KD is still doing update every month. aim to add 100 more cars in 2016.

[paul_12345]

80% for comon keys. not for the smart keys

let me explain why 80%

KD CAN cover 1995-2015 all toyota , honda nissan kia hyundai mazda subura (not include smart)
almost all 1995-2015 vw ford (only mqb not support) ， 70% AUDI （even 2016 TT and A3)
cover 1998-2016 all PSA , 90% buick and chevelot (for 2016 new cars all support well)
and almost all china local cars.

please go to google play or apple store try to search MOBILE KD or KD900 to downlod the APP to see the list.

i must say , KD is still doing update every month. aim to add 100 more cars in 2016.

Would be good to get 2 and 3 button old PSA style case for PSA with square logos that can also take a SX9 blade.

If you had the old style PSA case and a list of what cars used which remote then it would be fantastic and I'm sure everyone would be using these instead of originals

[jimmykey]

Would be good to get 2 and 3 button old PSA style case for PSA with square logos that can also take a SX9 blade.

If you had the old style PSA case and a list of what cars used which remote then it would be fantastic and I'm sure everyone would be using these instead of originals


HI PAUL

KD HAS THE 2016 DS LOOKS FLIP

VERY NICE

GO TO MOBILE KD YOU CAN SEE IT

362903

[paul_12345]

HI PAUL

KD HAS THE 2016 DS LOOKS FLIP

VERY NICE

GO TO MOBILE KD YOU CAN SEE IT

362903

yes it does look nice but what you need to understand is a lot of customers will not want it even if its looks nice, because they want an original looking replacement.

On old non-flip remotes then they will like the new style flip... but on cars with old style flip remotes many will want the same shape.

I'm sure if you make the old style your sales figures would agree with me.

[Weasel3]

Please go to google play or apple store try to search MOBILE KD or KD900 to downlod the APP to see the list.

__________________________________________________ __________________________________________

I downloaded the app on ITunes, to use it on a Ipad. Does not seems to work?
Only accepts Iphone?

I can only see the App visible on the Iphone field on ITunes on the PC. In the Ipad field the app is not visible.
Is this true, or is it just me who is a newbie here now?

Only Ipad and Windows Phone for me.
So not possible to see anything of the App, at the moment.

[coolsoda]

Tradelocks Experience

On Monday i purchase 11x N11 & NB11 (DS Style) and 2 keyblades,also next say interlink delivery.

So i waited in,and received package next day,opened it to find 2 keyblades and lots of polysyrene nuggets,no keys


No note to say out of stock or on back order,no text,no email no call to let me know whats happening.
if they had just contacted me,i would have cancelled this order.

order on website still states processing.

Not a good way to get return customers

I will consider making a paypal claim if not sorted in a week,only used them as 3Dgroup are out of stock

[Atex31]

Tradelocks will always sort it out eventually.

[keyprogramming]

Tradelocks Experience

On Monday i purchase 11x N11 & NB11 (DS Style) and 2 keyblades,also next say interlink delivery.

So i waited in,and received package next day,opened it to find 2 keyblades and lots of polysyrene nuggets,no keys


No note to say out of stock or on back order,no text,no email no call to let me know whats happening.
if they had just contacted me,i would have cancelled this order.

order on website still states processing.

Not a good way to get return customers

I will consider making a paypal claim if not sorted in a week,only used them as 3Dgroup are out of stock
I dropped by at their office a couple of weeks ago on the way home from a job, and they were out of stock of the DS style then.
Just came away with some badges.

[keyprogramming]

80% for comon keys. not for the smart keys

let me explain why 80%

KD CAN cover 1995-2015 all toyota , honda nissan kia hyundai mazda subura (not include smart)
almost all 1995-2015 vw ford (only mqb not support) ， 70% AUDI （even 2016 TT and A3)
cover 1998-2016 all PSA , 90% buick and chevelot (for 2016 new cars all support well)
and almost all china local cars.

please go to google play or apple store try to search MOBILE KD or KD900 to downlod the APP to see the list.

i must say , KD is still doing update every month. aim to add 100 more cars in 2016.
Can you add Lexus RX300, RX350, RX400h in 433MHZ for Europe.
Thx

[Atex31]

Still need more 2 button remote options!


Customers don't like having a 3rd unused button on their shiny new remote keys.

[autoTkey]

And a Windows Phone app, please! It can't be that hard to port it.

[jimmykey]

even FACEBOOK do not want release the windows phone.
kd is a small company, maybe future cosider of this.

[PremierD]

:roflmao: ... good retort Jimmy :)

[Weasel3]

even FACEBOOK do not want release the windows phone.
kd is a small company, maybe future cosider of this.


I am not sure which tools is used here.

Visual Studio 2015. Which is free for download and develop.

Develop on this platform the Windows Phone App, and you could also make it fit the Apple and Android App at the same moment. As far as I understand.
I read some info about it earlier this week.

[foxtec800]

Haven`t seen any updates for a while for my kd200 or 900? Last update was in early Feb. Have the updates slowed down now?

[mikajna]

Hi guys, I have Audi A2 2002 with 3 button remote, with this remote number 8P0 837 231

Does somebody make this remote with some of KD remotes, because this number I didnt saw in KD software, does somebody know is any number compatible with this number?

Thanks guys, this is picture of remote case
365326

[coolsoda]

365337

It has 4D0837231 Suitabe for A2

[jimmykey]

Haven`t seen any updates for a while for my kd200 or 900? Last update was in early Feb. Have the updates slowed down now?

most remotes cracked , now speed can not be same as old time.
but still several every months to add.

we still have about 200 more chinese cars not add to kd900 , future maybe consider of this

[coolsoda]

we still have about 200 more chinese cars not add to kd900


if you cover 264 models of remotes and you already cover 80% how can you state you are adding 200 more chinese cars.This would make your claim of 80% untrue.
As i said great device and great effort,but if you made that claim in the west,i think Trading standards would be knocking on your door.


The makers of this chinese landwind X7 also state the car is nothing like an Evouque ,i think in China you can say anything
365495

[jimmykey]

if you cover 264 models of remotes and you already cover 80% how can you state you are adding 200 more chinese cars.This would make your claim of 80% untrue.
As i said great device and great effort,but if you made that claim in the west,i think Trading standards would be knocking on your door.


The makers of this chinese landwind X7 also state the car is nothing like an Evouque ,i think in China you can say anything
365495



sorry its my fault , but 80% is maily for each main market, such as usa , china , uk and so on. not one market has all of thoes car.
but we are still thinking to make all of them together.
you can say bad to KEYDIY, but i do not like your way talk about china.

[coolsoda]

Should amend your advertising then.

[PremierD]

OK mate ... you seem to have taken it apon yourself to nit pick and rubbish what is a good product and cast a bad light on chinese people .for what reason I do not know .But it stops here or you will not need to delete your posts , I'll do that for you along with the poster

PS. I'll apologize to Jimmy on the forums behalf .

[Faraday]

Seat alhambra 2003 using 7m ok.

[mikajna]

Seat alhambra 2003 using 7m ok.

And VW Sharan also up to 2010, tested few days ago...it work like a charm :)

[Faraday]

Off topic


It doesn't really matter if it covers 80% market or not (in my opinion) this tool make my job much easier. I don't need big stock of remotes anymore.

[garagetech]

When is jimmy introducing the audi A4 remotes with part no 8Z0......

Need them desperately

[Weasel3]

To loosen the tension on a Friday, Easter and everything.
KD team - Be proud of your product! It is highly appreciated.
The idea and development.
I don't care if it does not cover all vehicles, and brands at the moment.
But I know in the future, it probably will.
I think within 5 years the team have sorted out most of the vehicles out there.
Apps/blades/remotes. Fast lookup on everything. Maybe a new HW, which works along with the old one.
And then they really will have a huge control of the market.
What else do we need?
I am quite sure that the company, is not a company who abandon their tools for a new one. And stop updating.
The idea is to unique, and the competitors is not there at the moment either.
This is just a normal time of development.

It is getting a little bit better each day.
So we just need to have some patience, and the bits in the puzzle will find their places as the times go by.

[ajamesr]

Could someone let me know what remote they use for TPX or T7 chips? Have managed to wrangle them into Bentley Type remote but not ideal.

[Faraday]

Can you add grand Cherokee Model gq43vt9t

[whiskeyman]

still tool of the year in my book

jimmy any chance making a case like the Honda 2 and 3 button remotes
just a more rounded case rather than the brick

[autochei]

audi a3 8po worked


toyota yaris worked

[bigkey]

Hi all, this is a newbie, just bought an URG200 and received today.
There no software included, but I manage to download from KEYDIY site,
but I cannot get the comprehensive Application Guide at www.wikikeydiy.com/ (http://www.wikikeydiy.com/)
it requires password, I Skyped the seller but they know nothing about it.
Can some one kindly point me to the right direction to obtain the password please.

367645

[kevfield]

Contact AK the clue is in the big red letters

Thanks Kev

Sent from my GT-I9192 using Tapatalk

[PremierD]

:roflmao: ..........................

[jimmykey]

Hi all, this is a newbie, just bought an URG200 and received today.
There no software included, but I manage to download from KEYDIY site,
but I cannot get the comprehensive Application Guide at www.wikikeydiy.com/ (http://www.wikikeydiy.com/)
it requires password, I Skyped the seller but they know nothing about it.
Can some one kindly point me to the right direction to obtain the password please.

367645


SUGGEST DOWNLOAD THE MOBILE KD FROM GOOGLE PLAY OR APP STORE TO FIND HELP.
MUCH MORE EASY FOR THE APP

[mikajna]

KeyDiy remote 8P0837220D TT A3

Its working on Audi A3 instead OEM remote old shape with three buttons round shape.

Remote Number 8P0 837 231

[Atex31]

Do you know when the Mazda 41601 Naldec remote fobs will be working please Jimmy?

The software says only for test, not to make!

But I see it was updated yesterday the day after I sent a report through the KD900 software.

[jimmykey]

Do you know when the Mazda 41601 Naldec remote fobs will be working please Jimmy?

The software says only for test, not to make!

But I see it was updated yesterday the day after I sent a report through the KD900 software.


IN 15 DAYS MAYBE UPDATE AGAIN.
FOR THAT UPDATE ONLY CHANGE ITS STATE FROM TESTED TO UNCONFIRM

15 DAYS LATER WE MAY HAVE MORE SAMPLES

ANOHTER NEWS IS WE WILL UDPATE MANY TOYOTA SOON

PN WILL BE SUCH AS 0D010 0D020 0D030

[Fallen]

Any chance of getting remotes for Alfa Romeo 147?

[mikajna]

That would be grate, also because that cars are still a live, like fiat stilo...but oem remotes are not to expensive, key diy replacement will like good choice for better look :) and if they make oem shape of new Alfa Romeo and of new Fiat, that would be pretty good thing

[bigkey]

Just done a Hyundai iLoad 2015 yesterday, so much easier than I anticipated, recouped 1/3 of the investment, can't stop smiling...

My seller in China only stock automotive remotes, does any body know where can I order garage remotes for KD900?

[garagetech]

Hi can kd make mini s cooper 2003 remotes?

[paul_12345]

Hi can kd make mini s cooper 2003 remotes?

no.........

[Atex31]

3 button remotes are no problem but not the 2 button with barcode.

[Focus66]

Hilux433 worked a treat for a 2007 Toyota Hilux, used a BO1 - 2 button with Toy43 blade.
Net version, had a couple of issues connecting to the server but got there in the end.

[Focus66]

I think it's still early days on the remote production side for KeyDiy, lots of input from us the users will help develop and improve the system for the future. Yes I know it doesn't cover 80% of the market at the moment but I personally do like it.

[bigkey]

I also heard there is "universal interface) which will converts any remote for use with KEYDIY system .... is that true???
Can some Masters comment on this please

[coolsoda]

Tried all the Renault variants with correct ATT 46 Key No RF output when i checked frequency ,thought maybee a faulty key so tried Touareg and the Frequency was ok.

So no use for any Renault

[AlanKFW]

I'm sure I read somewhere in this thread that the KD does 100% Toyota from like 99 - 2010 or something. I presume thats not for the 433Mhz European market? Say the 2006 Avensis ID70 with 05010 on insert.

[AlanKFW]

Ok. Been working on this for a little while and I think you might benefit from it and I hope you might even like to contribute some info to it.

Its a KD900 APP DATABASE.

Simple to use. You can search for keywords (part numbers, etc) and it will search the entire database and give back results. You can edit already existing vehicles to update or add info. And you can add new vehicles very easily.

By default the database opens in alphabetical order of the Manufacture but you can click on the heading of any column to re-order by that column.

I have labeled the Hints and Tips section "AA Hints and Tips" so that it always comes up at the top. This is just for any general tips anyone might have that don't belong to a particular vehicle.

To view a record just click on "view" and when you are in that record there is an "edit" button at the bottom of the page to add info.

You can add a new record at any time by clicking "ADD KD900" button at the top of the home page.

I've also included a Mhz column and at the moment all the entries (over 100) are 433 as that is all I am interested in. If adding a new record please make sure to choose which Mhz ( 433 or other ) as this will be important to filter information we actually want when searching.

Its all very easy to use and navigate and the idea is just to provide a central database that hopefully some won't mind contributing some info to benefit us all.

Please also "ADD" vehicles that have failed - that is as important as the ones we can do.

!!!!!!!!!!!!! Updating Notes !!!!!!!!!!!!!!
There are upsides and downsides to a system like this.
Upside is how is it is to contribute , share and get the help of a combined knowledge base.

Downside is that we are dependant on submitters being carefull with info they submit. If you are unsure about something or it is only an educated guess - please feel free to share that , but mention that its not 100% confirmed.
Also if editing notes, please be carefull not to delete what is already there. If you accidentally delete notes while typing in your own - just don't click the "Submit" button - exit the screen and when you go back to edit, the original notes will still be there.

Anyway hope you like it and can be of some use, its just an effort to collate alot of info that is out there into one handy place.
At the moment it is free to use and the only thing I might have to do at some point is put a donation button for a small amount on the page to cover the cost of the database rental.

Any suggestions or anything else, please let me know.

Here it is:

https://keyfast.knackhq.com/kd900

[Atex31]

The boot button is still not working on VW Beetle.

1J0 959 753 P (Beetle)

I thought it had been sorted but still no function.

Can you take another look at it please Jimmy?

The Audi A3 boot button is working fine now, it does need a few extra seconds holding the button, once you have explained to the customer it's OK.

[ninja123]

This is a great idea, just been adding my own successes to your DB.

[Weasel3]

New HW. KD900+

https://www.youtube.com/watch?v=mJREhAtnjxY

[AlanKFW]

This morning my Mobile KD App had some kind of notification on my lock screen about something to do with wrong voltage on an NB remote. When I unlocked my phone to read it I could not find the message anywhere. Anyone have any idea what it was?

Found it. Updated APP and it was in a new section.
"when generate the NB remotes sometimes show Communicate Error. The reason is NB remote need more voltage. Please use PC software to generate. And sometimes even need generate more than 1 time to be successful."

[AndyCZ]

Today Hyundai IX20 generated remote could't be programmed. Original remote programmed OK. Tried several other remotes Kia/Hyundai, no luck. This was newer IX20 2013 with 6E 80 bit transponder.

[Focus66]

The boot button is still not working on VW Beetle.

1J0 959 753 P (Beetle)

I thought it had been sorted but still no function.

Can you take another look at it please Jimmy?

The Audi A3 boot button is working fine now, it does need a few extra seconds holding the button, once you have explained to the customer it's OK.

Same problem, boot release not working on VW Beetle.
Can you sort out a fix for this soonest please.
thanks.

[Atex31]

The last batch of HU66 blades seem to have a problem,

The Chrome plating just falls off when you try and cut them.

371882

[keyprogramming]

Got the attached error message last week on my Dell Laptop running Win 10 Home.
Thought it was a problem with laptop so used my HP Mini 9 running Win 7 Home OK
Now HP Mini 9 has same error message
Anyone else tried to load KEYDIY on their machines, or suggest what the problem is.

372210

[Faraday]

Got the attached error message last week on my Dell Laptop running Win 10 Home.
Thought it was a problem with laptop so used my HP Mini 9 running Win 7 Home OK
Now HP Mini 9 has same error message
Anyone else tried to load KEYDIY on their machines, or suggest what the problem is.

372210


Do virus scan.

[jimmykey]

Same problem, boot release not working on VW Beetle.
Can you sort out a fix for this soonest please.
thanks.

WILL CHECK IN THIS WEEK
THANKS FOR RESPONSE
AND ALSO PLS HELP RESPOSE IN PC SOFT OR MOBILE KD APP IN THE REMOTE DIRECTLY

THANKS SO MUCH

IN 5.20 KD900 WILL RELEASE A GREAT FUNCTION TO LET ALL OF US DEVELOP GARAGE AND LOCAL CARS.

KD NOT ONLY HELP TO SAVE REMOTE STOCK BUT ALSO HELP TO TRAIN PEOPLE HOW TO DEVELOP REMOTES.

THANKS FOR ALL

[keyprogramming]

Do virus scan.
Ran a full scan and error message gone
Many thanks

[Atex31]

WILL CHECK IN THIS WEEK
THANKS FOR RESPONSE
AND ALSO PLS HELP RESPOSE IN PC SOFT OR MOBILE KD APP IN THE REMOTE DIRECTLY

THANKS SO MUCH

IN 5.20 KD900 WILL RELEASE A GREAT FUNCTION TO LET ALL OF US DEVELOP GARAGE AND LOCAL CARS.

KD NOT ONLY HELP TO SAVE REMOTE STOCK BUT ALSO HELP TO TRAIN PEOPLE HOW TO DEVELOP REMOTES.

THANKS FOR ALL
Thanks for the advice,

I have sent reports in the KD900 software feedback too under Beetle P and B remotes.

I look forward to seeing the bug fixed as always.

[Weasel3]

KD team is shaking the market. All in one place.

[ninja123]

I have no idea what statement you are trying to make here!!!

[Weasel3]

I have no idea what statement you are trying to make here!!!

I edit the text.
Maybe its the best.

[bigkey]

Hi Jimmy, is that mean all KD remotes are RE-USEABLE ?
Say just change the blade and reuse for another car?
Cheers


kd900 can renew NB SERIES KD REMOTES
IT ALSO WORK FOR ALL PSA

[jimmykey]

you are right
can reuseable

[whiskeyman]

hi jimmy is there any chance you could look at the blue ford transit remotes

be fantastic if we could do these

[paul_12345]

hi jimmy is there any chance you could look at the blue ford transit remotes

be fantastic if we could do these

along with new ford shape remotes (that can take the oval logo) ;)

[insomnia2009]

Has anyone done a mazda 5 i cant get it to go have done good few mazda 3 and 6 but cant it working on mazda 5

[ninja123]

Ive done mazda 5 no problems

[insomnia2009]

Ive done mazda 5 no problems


hi ninja what way did you do it im getting it in to programming mode but not accepting the key maybe im doing something wrong

ignition on then off open drivers door ignition on off 5 times open and close door 3 times locks cycle press unlock button twice

can you confirm for me thanks

[ninja123]

do you leave key in ignition or remove?

Also you must choose correct remote.

[insomnia2009]

hi thanks for reply which is correct remote i tryed both ways key in ignition and out

[bigkey]

Also I spent good hour today and still cannot generate a remote for 2005 Mazda 2.
I get the car into learning mode then simulated each Mazda remote on the device and still not success.
Any help would be appreciated

[bigkey]

All you guys saying thank you for number one or two?:)
You mean W~~~er? or F~~~er? Or both:burnout:

I found the price down to 2USD, so yeah a new one is the right thing.

Hi friend, can you share the link where you can buy it for 2USD please

[Weasel3]

I can not find the link. It was on a different PC. It was from a direct webshop. Not like Ebay or AliX.
You get free shipping on this link from AliX.
Would it be OK?
Same remote shell.
Almost 2USD.
Just 2.34USD. This includes 10% extra off the next 16 hours.

http://www.aliexpress.com/item/Car-Case-Replacement-Folding-Flip-Remote-Key-Shell-Case-3-Button-Case-For-AUDI-A2-A3/32571705603.html?spm=2114.01010208.3.84.VlRJZf&ws_ab_test=searchweb201556_7,searchweb201602_5_100 17_10034_10021_507_10022_10020_10009_10008_10018_1 0019,searchweb201603_7&btsid=8c65ca7c-f9de-4bf9-94e1-c9931dd3b8c6

[ngakson2002]

Dear Jimmy!!!

Just a few words to find out if the KD900 used with the NB11 - 46 remote can make the 03 Buttons remote for a 2002 OPEL VECTRA C

Best regards

[jimmykey]

Also I spent good hour today and still cannot generate a remote for 2005 Mazda 2.
I get the car into learning mode then simulated each Mazda remote on the device and still not success.
Any help would be appreciated

do you have a pn for the original remote?

there are 2 more remotes for mazda will udpate next week

[Focus66]

Jeep Cherokee 2007 Remote.
Looks like I can generate the correct remote with keydiy, 3 button using NB02: JEEP M3N 433 but I can't seem to find anyone selling the keydiy blade. Silca is CY24, JMA is CHR15. Are these blades available anywhere for keydiy ?

[AlanKFW]

Has anyone done a mazda 5 i cant get it to go have done good few mazda 3 and 6 but cant it working on mazda 5

Try SKE126-01 and MAZDA6 CX9

PROGRAMMING procedure I have is different. Your procedure may just be confirming if its type A or B system (locks cycle to confirm type B - but car is not in programming mode) Type A & B are practically the same except in TYPE A you must only use UNLOCK button to enter remote, if you use any other button programming mode is exited. Type B will allow you to press any button to add remote.
You also must enter 3 remotes - well not strictly true - you must fill the 3 remote slots. You can fill the 3 slots with the same remote, just program the same remote 3 times during the same procedure. So press the UNLOCK button 2 times, locks should cycle, then press the same button twice again, locks should cycle, and then do it one more time. After 3 enteries are made - programming is exited.

http://s32.postimg.org/ibz75k3r5/Screen_Shot_2016_05_07_at_08_41_23.jpg (http://postimg.org/image/ibz75k3r5/)

[ngakson2002]

Hello Mate.
Just made a remote for 2007 TOYOTA AVENSIS EUROPE 433MHZ with Valeo Blade.
KD900 will program the remote successfully, but surprised that:

1) Following programming, no Token is Used
2) Remote is not working.

Please has anyone ever successfully program remote on this Avensis.Is no Token deducted normal?

[coolsoda]

Now has Astra H listed,Clearly Wrong States use key ATT-46 and enter Data in hitag pages,so more than likely its for Vectra C with PCF7946 as Astra H is PCF7941

Also listed is the Rover Lucas 2 button remote,can any one confirm this works,as this will be a popular one

[ninja123]

rover remote been listed for years, but has never worked, unless its been updated?? Any way of knowing if certain non working remotes have been updated?

[autochei]

about audi a4 2007 8eo can be possible to add by kd900?

a3 i sow can be that it s very good for us 50 token used

[Atex31]

about audi a4 2007 8eo can be possible to add by kd900?

a3 i sow can be that it s very good for us 50 token used
Jimmy says the restrictions to the firmware means it's not possible to make the Audi 8E0 or 8Z0 remotes.

Would be great if it could though.

[mikajna]

Guys I never saw rover two button lucas remote in my kd900 software, today i was update software and dont have Astra H listed as coolsoda said, is there any difference in updating, is difference in tools, do you have kd900 or kd200 coolsoda?

thanks guys

[cjawahir]

Guys I never saw rover two button lucas remote in my kd900 software, today i was update software and dont have Astra H listed as coolsoda said, is there any difference in updating, is difference in tools, do you have kd900 or kd200 coolsoda?

thanks guys

yes it was there before , now its gone , strange .

cj

[cqae]

I thought there were issues with the astra H so it was removed

[paul_12345]

Astra H was removed from the PC software version a long time ago.

[jimmykey]

Astra H was removed from the PC software version a long time ago.

YES ，removed， we need go to europe for a local test this year。
maybe we will go to turkey and uk and italy , if you have some big shop please let us know.
by the way , if anybody has any urgent question about kd900 or kd200 or kd900+ , please try to download mobile kd
we have many expertes there worldwide to reply quickly.

[neverquiet]

Hi M8's

Is there any way to make GM remote start work with any of the KD remotes?

Br,

[jimmykey]

Hi M8's

Is there any way to make GM remote start work with any of the KD remotes?

Br,


NO KD ONLY WORK FOR AT MOST 4 BUTTON
ENGIN START IS THE 5TH BUTTTON

[AndyCZ]

VW Beetle 2001 1J0959753DA not worked. Tried also 1J0959753AH, no luck. 1J0959753P worked but without trunk.

[PremierD]

15 year old car .. and you're moaning .................

[AndyCZ]

I'm not moaning. I'm giving information so you can give the right information to your customer next time it happen.

[Weasel3]

VW Beetle 2001 1J0959753DA not worked. Tried also 1J0959753AH, no luck. 1J0959753P worked but without trunk.

Try also:
1J0959753N it can replace many of the earlier versions.

[kaToo]

VW Beetle 2001 1J0959753DA not worked. Tried also 1J0959753AH, no luck. 1J0959753P worked but without trunk.


only 1J0959753P can work with this car

[AndyCZ]

Try also:
1J0959753N it can replace many of the earlier versions.
1J0959753N did not work

[drivesure]

1j0......B will work - this is original remote 433mhz.

[obdsystems]

Where's 7M3 959 753 gone ?

aka vw sharan fob

[Atex31]

It's still on my pc and working even with the latest version.

[kaToo]

It's still on my pc and working even with the latest version.

how are you programing this remote . Yesterday i have a sharan and when i pres ORI remote lock button and unlock 3 times the light stays On but not same with KD remote .

[Atex31]

Same method, did one 10 minutes ago.

[obdsystems]

It's still on my pc and working even with the latest version.


Re-installed with download from keydiyuk.com

not keydiy.com

[AndyCZ]

Has anyone programmed KD remote for Peugeot 607? I tried all ASK types but with no luck. Original remote programmed OK. This was 2005 and ASK.

[jimmykey]

Any pic of original remote?


从我的 iPhone 发送，使用 Tapatalk

[didi_du_93000]

http://uploads.tapatalk-cdn.com/20160524/04229eb5406bddda391e7ff129e75685.jpg

With tapatalk

[whiskeyman]

Any chance add Hyundai i10 remote
3 button
433mhz
95430B4100

[whiskeyman]

....................
what this mean?

[mikajna]

what this mean?

Its not about your comment mate, I want to say something, than I change my mind (its my mistake)...after that I try to delete comment, because I cant delete comment, I had to edit to ""..................."

[PremierD]

Then I deleted it .............:)

[AndyCZ]

Any pic of original remote?
Jimmy, this key..
http://www.car-keys-online.com/userfiles/productimages/product_19.jpg 377611

Marks on PCB (buttons side):

26 04
E28CI01B
4
94V-0 0518

[jimmykey]

kd do it easy. 0523 fsk or ask. 0536 ask or fsk. Try 4 remotes and one work


从我的 iPhone 发送，使用 Tapatalk

[didi_du_93000]

Hello Jimmy,

Out of topic...

Please can you tell me what difference between KD900 and KD200?


It's REAL same fonction and one standalone and second need PC or have more difference?

Regards,

[PremierD]

Very first post .. read on (search function input KD200 ) .... dead easy mate :)

http://www.digital-kaos.co.uk/forums/showthread.php/380914-********KD900-remote-generator********?p=2163351&highlight=KD200#post2163351

[AndyCZ]

kd do it easy. 0523 fsk or ask. 0536 ask or fsk. Try 4 remotes and one work

This was ASK so I tried all ASK KD have. Not worked. This may have different remote config data like this remote?

http://uploads.tapatalk-cdn.com/20160524/04229eb5406bddda391e7ff129e75685.jpg

[totalkey]

Pegout 407 2005 doesn't working

Sent from my VOYAGER2_DG310 using Tapatalk

[ninja123]

peugeot 407 2005 WORKING VERY GOOD!!

Ive done 3 this week and all working - 2005, 2007 and 2008.

Choose first remote under peugeot on pc software.

[CaioW]

I'm trying to find the remote from one Opel Frontera 2001, and cannot find.
Did you guys generate this model?

Thanks guys!!

[Carkeysa]

Try this under Isuzu HYQ1512R as per https://en.wikipedia.org/wiki/Isuzu_MU


I'm trying to find the remote from one Opel Frontera 2001, and cannot find.
Did you guys generate this model?

Thanks guys!!

[CaioW]

Try this under Isuzu HYQ1512R as per https://en.wikipedia.org/wiki/Isuzu_MU

I'll try, tomorrow let you know if works or not.

Tried with this and nothing happen..
Tried with (93176615 wrong) 93286048 and works perfectly. (add with SBB)

Thanks for the try!! :D

[keyprogramming]

Lost Keys on a 2002 Nissan Primera P12 square 2 button remote
Tried all the 2 button square options no joy.
Tried Old Pulsar-B 433Mhz, worked perfect
Original part number 282689F974
Will probably work on Almera (N16E) and Almera Tino (V10M) as same remote

[Atex31]

Lost Keys on a 2002 Nissan Primera P12 square 2 button remote
Tried all the 2 button square options no joy.
Tried Old Pulsar-B 433Mhz, worked perfect
Original part number 282689F974
Will probably work on Almera (N16E) and Almera Tino (V10M) as same remote

Did the driver's door unlock with just one press?

If you use the later square remotes, they program ok but you have to press the unlock button twice to open the driver's door.

[keyprogramming]

Did the driver's door unlock with just one press?

If you use the later square remotes, they program ok but you have to press the unlock button twice to open the driver's door.

Yes and no.
If the drivers door lock mechanism had not been faulty, it would have opened with one press.
Had me thinking for a while, why can't you open the drivers door from the outside after pressing open.
Spoke to owners wife who forgot to tell me that there was a fault with the door and her husband used to open the doors then lean in through the front passenger door and open the drivers door from the inside.

[keyprogramming]

Successfully programmed 2008 Peugeot 308 2 button remote as a 408 0536 FSK

[Atex31]

Lost Keys on a 2002 Nissan Primera P12 square 2 button remote
Tried all the 2 button square options no joy.
Tried Old Pulsar-B 433Mhz, worked perfect
Original part number 282689F974
Will probably work on Almera (N16E) and Almera Tino (V10M) as same remote

It does work on the N16E Almera too. ;)

Cheers

[keyprogramming]

It does work on the N16E Almera too. ;)

Cheers

Thanks for confirming

[Galee]

Yes I can confirm Almera 2003 old pulsar remote works fine Euro car.


Sent from my iPhone using Tapatalk

[ngakson2002]

Hello Jimmykey

Please is it possible using KD900 to make the following remote provided on PEUGEOT 607.Please if yes under which PEUGEOT remote this should be done.

All the Best

[AndyCZ]

HYUNDAI 81996-4H500 FSK works with H1 2010.

[keyprogramming]

Successfully programmed a 2007 Citroen C3 VF7FCKFVC28958271 as 307 0536 ASK

[AlanKFW]

Anyone know if KD will produce remote for 2004 Suz Liana. Will SZK001 do it?

[keyprogramming]

No joy with a 2008 Peugeot Partner
Tried
307 Old Flat A
307 Old Flat B
206 207 C2
But the 307 Old Flat B did start the engine.

Even if one of them had worked, SX9 blade is not available, but just tried out of curiosity with the empty case

[CaioW]

Hi guys, i'm having some issues after the last update with one ID in particular.

382751

Witch is this one, i'm using the correct remote and after writing the remote, the remote stop works and if i try to use another reference the remote works perfect.
Did you notice this issue?

[keyprogramming]

These remotes are so cheap, I have never tried to make one.

[paul_12345]

Jimmy I notice that the ID changes with each different remote on the 36 remotes, but can we not have the first few bytes of the ID be random each time???

Because you wont be able to program two remotes in to the same car at the minute, so surely it would be easy to make the first few bytes random?

[ninja123]

I did a 2009 peugeot expert a few weeks ago, driver lost keys yesterday, so I went out to him, made another KEYDIY key and programmed in all ok, but the van was at a lunatic home, and someone had got the keys, the door locks were being opened and locked while I was there, I programmed a pcf7936 and car worked ok, no more doors locking/unlocking.
Then I programmed the new KEYDIY key, works fine, but then the doors are being locked/unlocked again by the nutcase with the missing key!!
My question is, will this key still start the car?

[CaioW]

These remotes are so cheap, I have never tried to make one.

Yes, i know..

But these are working before the last update.. :(

[totalkey]

I did a 2009 peugeot expert a few weeks ago, driver lost keys yesterday, so I went out to him, made another KEYDIY key and programmed in all ok, but the van was at a lunatic home, and someone had got the keys, the door locks were being opened and locked while I was there, I programmed a pcf7936 and car worked ok, no more doors locking/unlocking.
Then I programmed the new KEYDIY key, works fine, but then the doors are being locked/unlocked again by the nutcase with the missing key!!
My question is, will this key still start the car?
Yes it will, funny

Sent from my VOYAGER2_DG310 using Tapatalk

[paul_12345]

I did a 2009 peugeot expert a few weeks ago, driver lost keys yesterday, so I went out to him, made another KEYDIY key and programmed in all ok, but the van was at a lunatic home, and someone had got the keys, the door locks were being opened and locked while I was there, I programmed a pcf7936 and car worked ok, no more doors locking/unlocking.
Then I programmed the new KEYDIY key, works fine, but then the doors are being locked/unlocked again by the nutcase with the missing key!!
My question is, will this key still start the car?

as total said yes, each type of remote has 1 ID so the car wont know the difference.

The ID changes when you select another type of PSA key so keydiy have no problem changing the ID so very stupid not make the ID random.

[kleidaras]

I think the precoding on this key depending from ID. Maybe can't Calculate precoding for random ID?

[doolittle]

as total said yes, each type of remote has 1 ID so the car wont know the difference.

The ID changes when you select another type of PSA key so keydiy have no problem changing the ID so very stupid not make the ID random.
So silly question... If 2 citreon dispatches are parked beside each other with 2 different kiy remotes programmed in to them will the one remote open both and start both??

[paul_12345]

So silly question... If 2 citreon dispatches are parked beside each other with 2 different kiy remotes programmed in to them will the one remote open both and start both??

Would not start because the crypto key gets locked to a particular vehicle. Not quite sure what happens during remote learning, but maybe there would be a chance for the remotes to interfere with each other untill they fell out of sync - maybe Jimmy could shed some light on this.

[neverquiet]

Has anyone tried to use NB series remote precoded with CS for VW Touareg or Porsche Cayenne after 2008?
I haven't got a chance to get a vehicle to try.

[keyprogramming]

Successfully programmed a 3B to a 2006 Peugeot 407 Estate as a 0523 ASK
All 3 buttons inc boot release (or rear glass window open for estate)
Original sticker 662267

[didi_du_93000]

Anyone have reply from keydiy at email or Skype?
1 week without reply from many email and skype message.

With tapatalk

[cjawahir]

Anyone have reply from keydiy at email or Skype?
1 week without reply from many email and skype message.

With tapatalk

Candy keydiy.com

cj

[didi_du_93000]

How can I contact this guy?

With tapatalk

[AlanKFW]

Does anyone know if NB-ETT-GM remotes are available yet?

[cjawahir]

How can I contact this guy?

With tapatalk


with skype .

cj

[PremierD]

lol ................................

[bigkey]

Does anyone know if NB-ETT-GM remotes are available yet?

I am a bit confused about NB remotes. For my understanding there are 5 modes for NB remotes; can you change from 1 mode to another? or do you have to buy the specific one?

[bigkey]

do you have a pn for the original remote?

there are 2 more remotes for mazda will udpate next week

Sorry for late reply Jimmy, customer dont have remote so dont know pn for it

[AlanKFW]

I am a bit confused about NB remotes. For my understanding there are 5 modes for NB remotes; can you change from 1 mode to another? or do you have to buy the specific one?

No you can't change mode, have to buy the mode you need.

[lpf01]

IT SHOULD BE SAME AS DA OR AG OR CT . OR 753G
U CAN USE SMART MARTCH TO FIND THE CORRECT ONE

Somebody try this in the past?
Today i tried all for 7E0837202M, but without success

[AlanKFW]

Hi guys. In this video https://youtu.be/O3mU2iRDOvI?t=152 it shows a new type Skoda being programmed. I have the new Octavia but can't seem to program a remote. Is it possible, what should I be using? The writing on my original key is 959752 D

[comizelu]

Hi
Can someone tell me what type of key do I need to use for a bmw with ews 3 please..
Already got the transponder inside?
Thank you

Inviato dal mio HTC One utilizzando Tapatalk

[tomasete]

Land rover 433 must add 7935 and program

[AndyCZ]

jimmykey (http://www.digital-kaos.co.uk/forums/member.php/403705-jimmykey)



since some last update remote Skoda/VW code 1J0....AH - middle button trunk not working. Tested on two different cars.

But.. when program from KD machine directly it worked.

Please check the issue.

[comizelu]

I just bought the kd900..
The keys from keydiy don't have transponder inside right?
Thank you

Inviato dal mio HTC One utilizzando Tapatalk

[AndyCZ]

I just bought the kd900..
The keys from keydiy don't have transponder inside right?
Thank you

Inviato dal mio HTC One utilizzando Tapatalk

No, it's not being supplying. Different cars different transponders. KD can do many brands.

Only NB series with electronic transponder, mostly ID46 PCF79XX which can be reprogrammed never locked.

Hope this help.

[kevfield]

HI all, has anyone successfully programmed the later peugeot 2008 its on a 2014 year , when looking on keydiy app software it says about pcb being NB-ATT-36 V4.0 , I am not sure if i have this version of pcb or not ! how can i tell the difference?
car starts but remote not working

Thanks Kev

[Atex31]

Hi Kev,

The KD PCB will have a label on it showing which version it is.

[kevfield]

Hmm ok I did look but can't see anything regarding a version on it , but thanks for clearing that up for me Atex

Thanks Kev

[keysmith]

Only NB series with electronic transponder, mostly ID46 PCF79XX which can be reprogrammed never locked.

The NB remote PCF79XX doesn't lock? If that's true it would be good for testing purposes.

[AndyCZ]

The NB remote PCF79XX doesn't lock? If that's true it would be good for testing purposes.
they locked when programmed to car. But KD machine unlock it when you reprogram.

[bigkey]

Hi
Can someone tell me what type of key do I need to use for a bmw with ews 3 please..
Already got the transponder inside?
Thank you

Inviato dal mio HTC One utilizzando Tapatalk

I thought it is straight forward with B series remote. The only thing you have to choose is 315Mhz or 433Mhz;
maybe best simulate 2 remotes for both frequencies and sure 1 will work

[bigkey]

they locked when programmed to car. But KD machine unlock it when you reprogram.
If you chose the wrong KD software for the car, the NB remote dont lock but you cannot use on that car any more as the remote id has been recorded into the car memory. However, you can use that remote on another car without hassle.
If you want to reuse that remote to the same car, you have to delete all the remote from the car system first, then you can program that remote with different KD software.
Hope this clarify a bit more about the NB remotes

[paul_12345]

If you chose the wrong KD software for the car, the NB remote dont lock but you cannot use on that car any more as the remote id has been recorded into the car memory. However, you can use that remote on another car without hassle.
If you want to reuse that remote to the same car, you have to delete all the remote from the car system first, then you can program that remote with different KD software.
Hope this clarify a bit more about the NB remotes

A lot now have a different ID for each type of remote for NB so would program in fine.

Also they really need to sort out the ID so that it changes each time you use it... else you can only program 1 NB key to the car... how long before you get called out to a job to find out its already got a NB key and now you can't complete the job.

[drivesure]

hi i have a 2002 peugeot 206 that use seperate transponder with remote ( original key) . i want to program the all in key 46 and genereate remote - key starts but remote does not acccept. anyone done one of these.

regards

[drivesure]

hi, does anyone have success generating and coding a peugeot 206 remote key ? we coded one but only start the car - remote not working - we tried various synching procedures not working . ..... thanks

[bigkey]

A lot now have a different ID for each type of remote for NB so would program in fine.

Also they really need to sort out the ID so that it changes each time you use it... else you can only program 1 NB key to the car... how long before you get called out to a job to find out its already got a NB key and now you can't complete the job.

I thought each remote has different id, that's why we can use another NB when that NB not works ???..

[paul_12345]

I thought each remote has different id, that's why we can use another NB when that NB not works ???..

no, test it... select another type in KD software and it changes the ID.

So two remote with the same software has the same ID.

[Sergio101]

Wow, thats a major oversight by the designer.

In some cars, there is a workaround. Like ford for instance, there are various models that will work fine on the same car, like say for instance the onw with auto window function and the one without. Not ideal, But it couls get you out of trouble. Or PSA, make one with 2 button, one with 3.. I will try later to make 2 remotes for my toyota just to see. I havent had the need to make 2 remotes for the same customer yet.

[paul_12345]

Wow, thats a major oversight by the designer.

In some cars, there is a workaround. Like ford for instance, there are various models that will work fine on the same car, like say for instance the onw with auto window function and the one without. Not ideal, But it couls get you out of trouble. Or PSA, make one with 2 button, one with 3.. I will try later to make 2 remotes for my toyota just to see. I havent had the need to make 2 remotes for the same customer yet.

it only affects NB series remotes eg PSA remotes etc

[Sergio101]

it only affects NB series remotes eg PSA remotes etc

thanks for that. will keep it in mind :stung:

havent had machine long

[jimmykey]

394420 if you can not find the correct remote , you can also try seach via this app

[autoTkey]

No I can't. Because it is not available for Windows phones...

[Sergio101]

Then you should try the pc version. There are some remotes you can only make via pc online, so it's worth having also

[paul_12345]

No I can't. Because it is not available for Windows phones...

Surely wont hurt to get a android tablet considering how cheap they are.

[Fallen]

Wh
394420 if you can not find the correct remote , you can also try seach via this app

Why does the app want access to my photos and facebook?

[Sergio101]

I use the new style `psa remotes also. Worked a treat every time, look amazing and also are very sturdy. about the logo. I picked up on ebay the little rubber transparent stickers, 14mm, same type as the key diy ones. you can print little round stickers with your logo on sticky back 14 sheets, get a 14mm round punch, stick it on the key then stick one of the rubber pads on top of it.

[keyprogramming]

Wh

Why does the app want access to my photos and facebook?
And..
Device & App history
Identity
Location
Microphone
Wi-Fi connection Info
Bluetooth connection Info
Device ID & Call Info

[Fallen]

And.. Device & App history Identity Location Microphone Wi-Fi connection Info Bluetooth connection Info Device ID & Call Info Are you serious? Why the FK would it want this information? Time to in-uninstall.

[keyprogramming]

Are you serious? Why the FK would it want this information? Time to in-uninstall.
That's why I never installed it

[cjawahir]

most app ask for your personal info , for security reason if some one use this product in a bad way , u can be caught very easy .
so if your a legal lock or repair garage , no need to worry .

cj

[paul_12345]

Are you serious? Why the FK would it want this information? Time to in-uninstall.

just use permission manager to deny everything.

[Fallen]

But why would it want access to your photos and Facebook?

The app keeps requesting access to them.
It's very creepy.
WTF has my Facebook login and my photos got to do with a key programming tool from China?

[Sergio101]

the facebook login is to give you access to the keydiy forum from within the app.
If you dont trust the app, but want to use it, get a cheap use phone or tablet, make a new facebook account etc and use that only for work, and all work stuff there, personal stuff on phone. for 50 quid you can pick something up that will do the job,

[kaToo]

Audi a8 and touareg remote with ID46 are not working .
i generate remote and prepare transponder with avdi but when go to key learning the car won't accept the new key ...

[PremierD]

Audi a8 and touareg remote with ID46 are not working .
i generate remote and prepare transponder with avdi but when go to key learning the car won't accept the new key ...


And of course that is nothing to do with AVDI mate ?????

[Sergio101]

Audi a8 and touareg remote with ID46 are not working .
i generate remote and prepare transponder with avdi but when go to key learning the car won't accept the new key ...

Did you use the correct model key? must be att-46 model for vag