PDA

View Full Version : Tis pass code calculator



fadhle
29th November, 2013, 04:31 PM
Hi members i get this calculator for seed code of techstream.

pimpin
30th November, 2013, 04:27 AM
hi thanks how working ? how install ?

fadhle
30th November, 2013, 12:42 PM
Friend after connecting the techstream to the car you can use it, see pdf inside, regards.

elektro128
30th November, 2013, 08:31 PM
thx

this is for techstream, max version 7.10.030 ???
and new versions also?

regards

OalikO
30th November, 2013, 08:55 PM
I'm buy utility for ceed code removing. Thanks!

912secured
11th December, 2013, 06:08 AM
I thought it would search in ram. But it replaces the data.dat file and gets you going pretty smart. Make a loader that load changed data.dat at right time and soft fully done. On old v5/6 you could find in win hex. Never thought of crack so simple.

tqnata83
11th December, 2013, 10:57 AM
send working data.data fle

Toyo Moe
10th January, 2014, 01:46 PM
Its fake!, I spent a week trying to crack it and after successfully cracked it didnt work on techstream, this is fake soft dont waste your time.

MrMike
28th April, 2014, 07:44 AM
Did anybody get this working? I have tried but the software wont open even when connected to vehicle

gwee
28th April, 2014, 11:45 AM
This will never work lol lol

zalfawadleh
21st September, 2015, 04:13 AM
does it ask for a VIN?

Kinskeys
21st September, 2015, 04:18 AM
If you have a Tango & buy the Toyota software so you can read the EEPROM then make a key off the dump, you get this calculator, just saying for the folks with Tango

djoka
4th April, 2016, 07:11 PM
Djoka want to dowloand this

Kimhay
1st May, 2016, 09:22 AM
I Cannot download

PremierD
1st May, 2016, 10:12 AM
Oh dear ... my heart bleeds for you mate .....:)

husseiniq
17th July, 2016, 10:47 AM
Thanks in advance for the sharing.

adamjohn
14th September, 2016, 04:19 PM
what about new TIS?

htc
1st October, 2017, 10:03 AM
it not working

vasynet
1st March, 2018, 11:04 AM
i click file TIS caculate.exte why it not open and show sth

fantazia2
27th April, 2018, 09:35 PM
Did anyone get this working?

achaccha
28th April, 2018, 12:48 PM
[QUOTE = fadhle; 2160936] Hola miembros, obtengo esta calculadora para el código semilla de techstream. [/ QUOTE]
Dear Friend,
Please, please explain how this software works. All the steps of the help are carried out and it does not work.
thank you for your comment.

ggordon1973
18th November, 2018, 01:13 AM
trying to add keys to my prius

testprofesi
1st December, 2018, 12:53 PM
i hope this works, and get downloaded
thank you

khpda
28th January, 2019, 08:36 AM
Hi members i get this calculator for seed code of techstream.

does it work??

shntat
3rd March, 2019, 01:57 AM
I have techstream 13.00.22 is there a immo passcode generator that works? i have a 2013 rav4 with a water damaged immobilizer replaced with a used one.

artcom
3rd March, 2019, 10:44 AM
There is a working calculator for tis version 8.20.019. who needs a calculator write in PM.

Autokent
14th March, 2019, 09:40 PM
I have this calc.
Support version from 8 to 14
Video:
https://www.youtube.com/watch?v=DIDDM9vxzSQ&lc=

https://www.youtube.com/watch?v=DIDDM9vxzSQ&lc=

sp00ky75
7th June, 2019, 04:47 PM
I have this calc.
Support version from 8 to 14


I have solve my problem on another way. Thank you !

wad1987
12th August, 2019, 07:40 PM
Hello. I Can't download :/

111arm
21st August, 2019, 08:31 PM
Hi will u share that calculator? Autokent?

Autokent
21st August, 2019, 08:50 PM
Hi will u share that calculator? Autokent?
I sell this calculator.

Calculator supports version 8 to 14.20.XXX
This calculator has protection and is tied to the PC hardware.
The calculator does not work with virtual machines.
Not working on WinXP!!!!

This calculator is used only for IMMO reset, not to activate the program.
Here's a video demonstration of my calculator:
https://youtu.be/DIDDM9vxzSQ

zainahsan
25th December, 2019, 08:52 AM
will it work?

trainman0101
17th January, 2020, 09:45 AM
I click on it, it does nothing. The LicenseManager makes a *.dat file (probably containing my processor ID and such, I saw them in WinHex)

Here's what I discovered in the last few minutes

1. Extract with Universal Extractor (if you ever want to pull a compressed .exe apart, you want that). Turns out it opens in 7zip
2. Go to /.rsrc and open "rdata"
3. Check out after line "172336" and "174400" - interesting indeed. The outline of the 6 digit (1 through 9 sweep), then the original source code file name. I'm looking at the first few values in a source code file and also some op bytes, see if I can find the actual method that does the business. I'd like to figure out how this works (96 characters base 16 to 6 digits base 10? That's GOT to be something rather simple). I want to make my own method to do it, so I can just have a generator and not have it dick with my tis (new version anyway)

Vvmilnic74
17th July, 2021, 08:42 PM
There is a working calculator for tis version 8.20.019. who needs a calculator write in PM.

Can you share the info?
Thanks

Vvmilnic74
18th July, 2021, 12:04 AM
Is this program still works?

chetra
11th October, 2021, 05:26 AM
Hi member Why I can't download this file. Could you help me to download.