PDA

View Full Version : Need Power Class 1.4 Tsi



VcdsWorkx
1st January, 2014, 04:19 PM
Hey

I need to find The Power Class 1.4 160 Ps Golf 6 med 17

Dash is Borken

Has anybody a immo file or knows The power class ?!

Greeting

haroutioun
1st January, 2014, 04:54 PM
Hey

I need to find The Power Class 1.4 170 Ps Golf 6 med 17

Dash is Borken

Has anybody a immo file or knows The power class ?!

Greeting
Hello.
1) you Can't get power class manual from ecu flash,you need read it by obd2.
2) the same from dash you can't,It is not possible to get it from the eeprom directly because the EEPROM is encrypted and cannot get from there.to solve all this can done by obd2.
3) you need AVDI.

VcdsWorkx
1st January, 2014, 04:56 PM
I have a flash and a eeprom from this Car

A friend find there cs Mac and Pin ....

Only The power class is lost


I have Avdi but no med17 Update ....

autofan1965
1st January, 2014, 05:02 PM
When you dont get it i can give it at friday.

VcdsWorkx
1st January, 2014, 05:05 PM
The Problem is my Customer need this car ..... Maybee annybody have a immo file from a 1.4 Tsi ?

haroutioun
1st January, 2014, 05:21 PM
I have a flash and a eeprom from this Car

A friend find there cs Mac and Pin ....

Only The power class is lost


I have Avdi but no med17 Update ....
1) OK did you find used dash with the same number? if the same number this mean same power class,no need to get the power class, so just go by obd2 in the dash & write m**** the pin of ecu + the 6 byts,& the 7ht byts don't change it,of the used dash,and after you must use with new transponder (megamos 48) & after can done the all.
PS: but i don't know if your function can do this job.

VcdsWorkx
1st January, 2014, 05:26 PM
i have make new Transponders for this Car

i take Fin Serial Number (cs) MAC and Pin into the Dash the config i have edit to the car and the Keys

only the Status is not right only the Power Class 130000(80?)FC

the 80 is not Right for the 160 ps med 17 Golf 6 ,....

so i can dont start the Car :/ but whitch Power Clas has this Engine,....

haroutioun
1st January, 2014, 05:39 PM
i have make new Transponders for this Car

i take Fin Serial Number (cs) MAC and Pin into the Dash the config i have edit to the car and the Keys

only the Status is not right only the Power Class 130000(80?)FC

the 80 is not Right for the 160 ps med 17 Golf 6 ,....

so i can dont start the Car :/ but whitch Power Clas has this Engine,....
1) ok.try 56 or 6a or 3a, if accept it will be ok.
2) if you need file let me know the size 8.00kb or 4.00k

VcdsWorkx
1st January, 2014, 05:40 PM
8.00kb is were realy nice =)

Tank you!!!

haroutioun
1st January, 2014, 05:47 PM
8.00kb is were realy nice =)

Tank you!!!
OK this is a file try

haroutioun
2nd January, 2014, 10:29 AM
Hi,
what happen with you VcdsWorkx?
did solved?

VcdsWorkx
2nd January, 2014, 11:43 AM
Not work :(

Car is now by vw and there nothing work -.- online Update from immo faild with The original Dash


I think The calc is wrong from pin or cs


I Write now a Dash to New Mode and Hope Then goes The online Update from immo ......